H3C配置ppp
51CTO博客开发龙哥Mars.Yu岳雷的微软网络课堂 远 飏 Holy2009.12.运维之路煮酒品茶知识改变生活
一环境说明程序部署路径/opt/devops/centos7 64位操作系统服务器 192.168.80.20客户端 192.168.80.10logstash2.0elasticsearch-2.0.0kibana-4.2.0二安装前的准备工作1 关闭防火墙、selinxu2 安装redis#yum install epel-release –y#yum install redis –y修改re
sybase bcp in
vmware虚拟机添加网卡后,RHEL6网络服务不能正常启动解决方法 在RHEL6中做双网卡绑定实验时,需要为虚拟机添加一块虚拟网卡,启动系统设置好网卡配置文件重启网络服务后出现如下错误提示: 弹出界面 eth0: WARNING: All config files need .conf: /etc/modprobe.d/vmware-tools, it will be ign
实验环境:RHEL6 准备工作:关闭iptables、selinx (1)到http://rpm.pbone.net下载适合自己系统的iscsi-target-utils的rpm包 (2)挂载光盘 #mount /dev/cdrom /mnt (3)将光盘作为yum源 #vi /etc/yum.repos.d/local.repo 添加如下内容 【local】 name
Nagios监控HP服务器的硬件状态 安装环境:RHEL6 方法一: (1) 下载bootstrap.sh #wget http://downloads.linux.hp.com/SDR/downloads/bootstrap.sh (2)  
安装环境: CentOS release 5.5、zabbix-2.0.0 安装前的准备工作: 安装并启动apache #yum install http* -y #service httpd start #chkconfig httpd on 安装php yum install php* 修改php #vim /etc/php.ini 修改如下内容 dat
(1)找到nagios-plugins-1.4.15目录即nagios-plugins的安装编译目录 #cd nagios-plugins-1.4.15 (2)重新设置编译参数 # ./configure --with-snmpget-command=/usr/bin/snmpwalk --with-snmpgetnext-command=/usr/bin/snmpwal
(一)准备工作 1、设置ip(略) 2、关闭selinux和iptables 3、设置yum(略) --------------------------------------------------------------------------------------------------(二)安装客户端软件 #yum install nss_ldap -y #yum insta
(一)安装前的准备工作 (1)略 ip设为 192.168.1.10 (2)关闭selinux及iptables (3)挂载光盘并把它设为本地yum源(略) -------------------------------------------------------------------------------------------------- (二)安装LDAP软件openld
(一)配置前的准备工作 1、配ip地址(略) 2、设置hosts文件 #vim /etc/hosts 添加如下内容 192.168.1.15 linux.yichunlan99.com 3、关闭防火墙及selinux(略) 4、设置yum源(略) --------------------------
-------------------------------------------------------------------------------------------------- 实验环境为centos5.4 ------------------------------------------------------------------------------------
安装的平台环境为Centos6 安装前的准备工作: 配置ip地址 (略) #yum install httpd -y 安装apache #service httpd start 启动apache #chkconfig httpd on 设置开机启动apache 安装mysql数据库 #yum inst
今天,将一台win7系统的电脑退出域并将其域用户的配置文件删除,重新加入域后,用该域账号登陆后,提示“您已经使用临时配置文件登陆*****logoff或restart后保存在桌面的文件将丢失”。 解决方法:1.右击-计算机属性-高级系统设置-用户配置文件-设置-选择要删除的帐户-确定 2
Copyright © 2005-2024 51CTO.COM 版权所有 京ICP证060544号