1. 详述storm系统架构 Storm架构由四个部分组成: （1）Nimbus: 集群资源调度、任务分配、接收jar包； （2）Supervisor 接收nimbus分配的任务、启动、停止自己管理的worker进程（当前supervisor上worker数量由配置文件设定） （3）Worker 运行具体处理运算组件的进程（每个Worker对应执行一个Topology的子集）、worker任
转载
2023-07-12 17:34:43
71阅读
# 如何实现“Java Mat Stand-alone”
## 简介
作为一名经验丰富的开发者，我将会教你如何实现一个“Java Mat Stand-alone”应用程序。首先，让我们来了解整个流程，并使用表格展示每个步骤所需的操作。
## 整体流程
以下是实现“Java Mat Stand-alone”的整体流程：
| 步骤 | 操作 |
| --- | --- |
| 1 | 导入所需的
原创
2023-08-09 09:10:40
14阅读
Objective: configure Routers 1, 2, and 4 with IP addresses and the Routing Information Protocol (RIP).Lab Equipment: Router 1, Router 2, and Router 4 from the eRouters menuBackground Reading: Lab Prim
原创
2008-04-17 13:03:13
2602阅读
Objective: configure Routers 1, 2, and 4 with IP addresses and Interior Gateway Routing Protocol (IGRP).Lab Equipment: Router 1, Router 2, and Router 4 from the eRouters menuBackground Reading: Lab Pr
原创
2008-04-18 09:37:05
1966阅读
1评论
Objective: Learn how to set up Integrated Services Digital Network (ISDN) on Cisco routers.Lab Equipment: Router 1 and Router 2 from the eRouters menu1. Connect to Router 1, and assign it a host name
原创
2008-04-19 16:24:28
3483阅读
1评论
Objective: Learn how the Cisco Discovery Protocol (CDP) functions and what is required for Cisco devices to be discovered.Lab Equipment: Router 1 and Router 4 from the eRouters menuBackground Reading:
原创
2008-04-04 16:49:37
2957阅读
1评论
Objective: configure Routers 1 and 2 with IP addresses, and ping between them to test connectivity. Then view the entries stored in the Address Resolution Protocol (ARP) table.Lab Equipment: Router 1
原创
2008-04-16 13:18:57
2275阅读
Objective: View and configure some basic areas of the router.Lab Equipment: Router 1 from the eRouters menuBackground Reading: Lab Primer Lesson 1: Introduction to the Cisco Router Command-Line Interf
原创
2008-04-14 13:31:41
1969阅读
When you change the name of the computer that is running SQL Server, the new name is recognized during SQL Server startup. You do not have to run Setu
转载
2020-06-01 20:11:00
52阅读
2评论
Objective: Configure a banner Message of the Day (MOTD). The MOTD is displayed when a user logs on to the router. The banner can also be used to display information about the router itself or to displ
原创
2008-04-14 15:27:57
2428阅读
Objective: configure Routers 1, 2, and 4 with Internet Protocol (IP) addresses, and ping between them to test connectivity.Lab Equipment: Router 1, Router 2, and Router 4 from the eRouters menuBackgro
原创
2008-04-15 16:37:27
1885阅读
3评论
Objective: configure Routers 1, 2, and 4 with IP addresses, and then add static routes for all routers.Lab Equipment: Router 1, Router 2, and Router 4 from the eRouters menuGoals:• Set the host
原创
2008-04-16 16:11:10
2886阅读
Objective: Become familiar with the Cisco Router.Lab Equipment: Router 1 from the eRouters menuBackground Reading: Lab Primer Lesson 1: Introduction to the Cisco Router Command-Line Interface1. When t
原创
2008-04-02 16:30:44
2260阅读
Objective: Become familiar with the router configuration and the copy commands available in the Cisco IOS.Lab Equipment: Router 1 from the eRouters menuBackground Reading: Lab Primer Lesson 1: Introdu
原创
2008-04-15 08:25:25
1968阅读
Objective: configure IP addresses on Routers 1, 2, and 4 with Routing Information Protocol (RIP)as the routing protocol. Then observe routing activity using the debug ip rip command, and examine route
原创
2008-04-17 16:42:40
2087阅读
Objective: View some basic areas of a Cisco Catalyst 1900 switch.Lab Equipment: Switch 1 from the eSwitches menuBackground Reading: Lab Primer Lesson 11: Switches1. Connect to Switch 1. You should see
原创
2008-04-20 08:51:53
1817阅读
Objective: Learn to establish a Frame Relay connection.Lab Equipment: Router 1 and Router 2 from the eRouters menuBackground Reading: Lab Primer Lesson 9: Frame Relay
1. Connect to Router 1, and co
原创
2008-04-21 08:21:18
2291阅读
Objective: Learn how to use the traceroute command. This command is used to map the IP addresses that a packet travels through to get from one device to another.Lab Equipment: Router 1, Router 2, and
原创
2008-04-18 15:45:01
1974阅读
Objective: Gain experience configuring standard access lists.Lab Equipment: Router 1, Router 2, and Router 4 from the eRouters menuBackground Reading: Lab Primer Lesson 10: Access ListsIf you feel con
原创
2008-05-04 09:06:47
1812阅读
Objective: Gain experience configuring extended access lists.Lab Equipment: Router 1, Router 2, and Router 4 from the eRouters menuBackground Reading: Lab Primer Lesson 10: Access Lists
1. If you hav
原创
2008-05-04 12:53:06
1766阅读
