$vmhostlist=get-vmhostforeach($vmhostin$vmhostlist){$esxcli=Get-EsxCli-VMHost$vmhostWrite-Host"$vmhost"$esxcli.system.time.get()|Out-Filetest.txt}
Virtualbox让云无处不在王春海
Set the OVF path to a variable: $ovfpath = "Path_to_OVA” Get the OVF configuration: $ovfConfig = Get-OvfConfiguration –Ovf
Symptoms使用 WinSCP 连接到 vCenter Server Virtual Appliance 会出现类似以下内容的错误：Cause 由于vcsa默认的root账号shell环境是/bin/appliancesh,使用root账号登录到vcsa服务器，手动修改root的shell环境为bash即可。Resolution
#add distributed switch to datacenter New-VDSwitch -Name vds-vmotion -Location Dtarget New-VDSwitch -Name vds-prd -Location&nbs
# DNS Servers $dnspri = "192.168.161.203" $dnsalt = "192.168.161.213" # Domain Name $domainname = "test.org" # NTP Servers $ntpone =&
Get-VMResourceConfiguration ` -vm $vm.name | Set-VMResourceConfiguration -CpuReservationMhz 576 -MemReservationMB 1024
$username = "root" $password = "mypassword" $ipstart = "192.168.1." $ipend = 23..25 $ipnew = 11 foreach ($iplist in $ipend) { &
先决条件： 1、硬件需要支持esxi操作系统 2、目标主机网卡支持pex启动 3、ESXI安装镜像校验完整 4、需要有TFTP、FTP支持 5、防火墙运行TFTP/FTP
#批量添加交换机 foreach ($vmhost in $(get-vmhost)) { New-VirtualSwitch -VMHost $vmhost -Name VSwitch -nic nic1,nic2 &nbs
$vms = Import-CSV D:\newvm\NewVMs.csv $netmask = "255.255.255.0" $gateway = "192.168.206.254" $dns = "192.168.161.203" $custSysprep = Get
#start vmhost services Get-VMHost ` | ForEach {start -VMHostService -HostService ($_ | Get-VMHostService | Where {$_.Key -e
介绍 VMware快照可保存虚拟机在特定时刻的状态和数据，包括虚拟机的电源状态（例如，打开电源、关闭电源、挂起），以及组成虚拟机的所有文件（磁盘、内存和其他设备如虚拟网络接口）。虚拟机提供了多个用于创建和管理快照及快照链的操作。通过这些操作，用户可以创建快照、还原到链中的任意快照以及移除快照。可以创建多种快照树。 &
$dnsServerName="dsnsvr.test.com" $containerName="test.com" $dns = [WMIClass]"ROOT\MicrosoftDNS:MicrosoftDNS_ResourceRecord" Get-Content C:\dnsListFile.txt | Foreach-Object&nbs
$vmhostlist = Import-Csv D:\test.csv foreach ($Vmhost in $vmhostlist) { $vmserver =&n
# DNS Servers $dnspri = "192.168.1.203" $dnsalt = "192.168.1.213" # Domain Name $domainname = "test.com" # NTP Servers $ntpone =
Add-PSSnapin -Name *vmware* $date = get-date -UFormat %y%m%d $vcenterlist = "vcenter1","vcenter2","vcenter3","vcetner4" $username = Read-Host("input&n
Copyright © 2005-2025 51CTO.COM 版权所有 京ICP证060544号
