早上7点多起来的时候,接到报警,发现主站后台的apache挂了,上去启动了下,没起来; 查看错误日志 发现有如下显示 [root@houtaicms logs]# tail -f error_log [Wed Mar 21 07:20:07 2012] [warn] pid file /usr/local/apache2.2.20/logs/httpd.pid overwritten --
转载 精选 2012-03-21 12:11:09
666阅读
[root@mail DBD-mysql-3.0008]# service httpd restartWarning: DocumentRoot [/usr/local/apache2/docs/dummy-host.example.com] does not exist解决方法:vi /usr/local/apache2/conf/httpd.confInclude conf/extra/htt
转载 精选 2013-07-19 18:34:08
565阅读
搭建apache服务器,启动的时候报错: httpd: Syntax error on line 53 of /usr/local/apache/conf/httpd.conf: Cannot load /usr/local/apache/modules/libphp5.so into server: /usr/local/apache/modules/libphp5.so: c
原创 2010-03-02 11:57:05
552阅读
apache启动报错:(125)Address already in use: make_sock: could not bind to address 192.168.xx.xxno listening sockets available, shutting downUnable to open logs解决办法:# ps -ef |grep nagios#一个个kill pid重启apache
原创 2012-07-30 11:13:09
593阅读
今天安装Apache httpd web服务器时,从官方网站上http://www.apache.org/dyn/closer.cgi下载httpd,然后在centos下解压,安装过程分为三部分:      (1)./configure      (2)make      (3)make install (需
转载 精选 2015-05-06 11:20:50
703阅读
 [root@localhost httpd-2.2.21]# service apache start 报错httpd: Could not reliably determine the server's fully qualified domain name, using localhost.localdomain for ServerName   解决方法
原创 2011-12-08 09:11:11
558阅读
    [root@localhost apache2]# ./bin/apachectl start httpd: Syntax error on line 53 of /usr/local/apache2/conf/httpd.conf: Cannot load /usr/local/apache2/modules/libphp5.so into server:&nb
原创 2012-05-21 13:10:07
1007阅读
Apache无法启动报错:Name or service not known: mod_unique_id: unable to find IPv4 address of "xxxx"  解决方案:修改 /etc/hosts,添加添加自己的主机名127.0.0.1    主机名 
原创 2017-07-11 22:04:16
1582阅读
在使用Linux系统搭建网站时,常常会用到Apache作为web服务器,搭配红帽操作系统进行部署。但有时在启动Apache时,可能会遇到不报错的情况。 首先,让我们了解一下Apache启动过程。当我们输入启动Apache的命令时,系统会先检查配置文件的语法是否正确,然后再进行启动。如果配置文件中有语法错误,Apache启动失败并报错。但有时候Apache启动后却没有任何报错信息显示,这可能会
原创 5月前
17阅读
  如果启动apache 报错: [root@localhost lib]# /usr/local/apache2/bin/apachectl restart httpd: Syntax error on line 61 of /usr/local/apache2/conf/httpd.conf: Cannot load /usr/local/apache2/modules/mod
原创 2012-04-20 08:47:50
6633阅读
1点赞
kettle项目中使用到了这个karaf框架 嵌入到java项目中,启动时会报错 信息: Lock acquired. Setting startlevel to 100 九月 28, 2021 1:01:38 下午 org.apache.karaf.main.Main$1 log 严重: Bund ...
转载 2021-09-28 14:50:00
2616阅读
2评论
[root@localhost ~]# service httpd startStarting httpd: [Wed Dec 12 12:03:49 2012] [warn] The ScriptAlias directive in /etc/httpd/conf/httpd.conf at line 1045 will probably never match because it overl
原创 2012-12-12 17:52:03
843阅读
比较坑 , 老徐早上起来,就收到同学反馈,咱们自己的这个站点isTester.com无法访问了 。 经过排查,发现80端口都没启动 。 尝试通过service httpd start启动启动失败 。 查看apache的error log [root@iZ94b31ttqsZ]/etc/httpd/logs# tail -100f error_log错误信息如下: [Sun Mar 31 22
原创 2021-07-21 14:17:16
498阅读
  Apache启动报错: Could not reliably determine the server's fully qualified domain name, using 127.0.0.1 for ServerName 报错如下: [root@test690 mysql]# /etc/init.d/apachectl restart httpd: Could not
原创 2010-05-04 17:12:24
633阅读
apache无法启动报错No space left on device 故障现象:apache无法启动ipcs信号量很多 # service httpd startStarting httpd : [Failed] 当达到极限信号量: # ipcs -s | wc -l32004 而: # cat
转载 2019-01-30 14:14:00
181阅读
2评论
  # /etc/init.d/httpd start Starting httpd: (98)Address already in use: make_sock: could not bind to address [::]:80 (98)Address already in use: make_sock: could not bind to address 0.0.0.0:80 n
转载 2013-02-01 10:20:59
1334阅读
php安装报错
原创 2018-05-01 20:04:55
1005阅读
1点赞
源代码编译安装apache启动报错问题1:httpd: apr_sockaddr_info_get() failed for crushlinux1.comhttpd: Could not reliably determine the server's fully qualified domain name, using 127.0.0.1 for ServerNamehttpd not runn
原创 2013-09-28 16:48:57
850阅读
源代码编译安装apache启动报错问题1:httpd:apr_sockaddr_info_get()failedforcrushlinux1.comhttpd:Couldnotreliablydeterminetheserver'sfullyqualifieddomainname,using127.0.0.1forServerNamehttpdnotrunning,tryingtostart[ro
原创 2013-10-14 19:50:32
504阅读
1点赞
执行配置安装httpd时出错configure: error: Bundled APR requested but not found at ./srclib/. Download and unpack the corresponding apr and apr-util packages to ./srclib/.需要下载apr和apr-utils 并解压到./srclib/, 再进行编译#wg
原创 2014-07-10 15:21:18
499阅读
  • 1
  • 2
  • 3
  • 4
  • 5