HSRP is a Cisco proprietary redundancy protocol, with this protocol one “virtual IP address “is assigned and always this address is used to go through the routers. At the backplane, the gateway interf
Redundancy is common point for today’s topologies.Especially in mission-critical networks that it is not acceptable that using only one gateway to reach a point. Because one gateway means singl
In this section we will do an HSRP configuration to understand the issue better. To do this we will use the below the topology [t'pld]. At the end ofthis article, you will find the GNS3 configu
I am going to start my 51 Blog life.
Copyright © 2005-2025 51CTO.COM 版权所有 京ICP证060544号
