1.引入TrayIcon.h(封装了Tray的一些api)//这一步并非必需,可以直接针对api编写代码
2.在主框架文件中创建CTrayIcon对象
3.为托盘添加菜单
eg.
4.处理托盘通知消息,一般在OnCreate函数中
eg.
m_trayIcon.SetIcon(IDR_MAINFRAME);
5.添加消息映射函数
ON_MESSAGE(WM_MY_TRAY_NOTIFICATION, OnTrayNotification)
6.编写OnTrayNotification函数
{
//add code
return m_trayIcon.OnTrayNotification(uID, lEvent);
}
7.添加气泡
如果使用的SDK为6.0 sp6 这需要修改include下的ShellApi.h文件,替换NOTIFYICONDATA定义部分
//// Tray notification definitions
////
typedef struct _NOTIFYICONDATAA {
DWORD cbSize;
HWND hWnd;
UINT uID;
UINT uFlags;
UINT uCallbackMessage;
HICON hIcon;
#if (_WIN32_IE < 0x0500)
CHAR szTip[64];
#else
CHAR szTip[128];
#endif
#if (_WIN32_IE >= 0x0500)
DWORD dwState;
DWORD dwStateMask;
CHAR szInfo[256];
union {
UINT uTimeout;
UINT uVersion;
} DUMMYUNIONNAME;
CHAR szInfoTitle[64];
DWORD dwInfoFlags;
#endif
#if (_WIN32_IE >= 0x600)
GUID guidItem;
#endif
} NOTIFYICONDATAA, *PNOTIFYICONDATAA;
typedef struct _NOTIFYICONDATAW {
DWORD cbSize;
HWND hWnd;
UINT uID;
UINT uFlags;
UINT uCallbackMessage;
HICON hIcon;
#if (_WIN32_IE < 0x0500)
WCHAR szTip[64];
#else
WCHAR szTip[128];
#endif
#if (_WIN32_IE >= 0x0500)
DWORD dwState;
DWORD dwStateMask;
WCHAR szInfo[256];
union {
UINT uTimeout;
UINT uVersion;
} DUMMYUNIONNAME;
WCHAR szInfoTitle[64];
DWORD dwInfoFlags;
#endif
#if (_WIN32_IE >= 0x600)
GUID guidItem;
#endif
} NOTIFYICONDATAW, *PNOTIFYICONDATAW;
#ifdef UNICODE
typedef NOTIFYICONDATAW NOTIFYICONDATA;
typedef PNOTIFYICONDATAW PNOTIFYICONDATA;
#else
typedef NOTIFYICONDATAA NOTIFYICONDATA;
typedef PNOTIFYICONDATAA PNOTIFYICONDATA;
#endif // UNICODE
#define NOTIFYICONDATAA_V1_SIZE FIELD_OFFSET(NOTIFYICONDATAA, szTip[64])
#define NOTIFYICONDATAW_V1_SIZE FIELD_OFFSET(NOTIFYICONDATAW, szTip[64])
#ifdef UNICODE
#define NOTIFYICONDATA_V1_SIZE NOTIFYICONDATAW_V1_SIZE
#else
#define NOTIFYICONDATA_V1_SIZE NOTIFYICONDATAA_V1_SIZE
#endif
#define NOTIFYICONDATAA_V2_SIZE FIELD_OFFSET(NOTIFYICONDATAA, guidItem)
#define NOTIFYICONDATAW_V2_SIZE FIELD_OFFSET(NOTIFYICONDATAW, guidItem)
#ifdef UNICODE
#define NOTIFYICONDATA_V2_SIZE NOTIFYICONDATAW_V2_SIZE
#else
#define NOTIFYICONDATA_V2_SIZE NOTIFYICONDATAA_V2_SIZE
#endif
#if (_WIN32_IE >= 0x0500)
#define NIN_SELECT (WM_USER + 0)
#define NINF_KEY 0x1
#define NIN_KEYSELECT (NIN_SELECT | NINF_KEY)
#endif
#if (_WIN32_IE >= 0x0501)
#define NIN_BALLOONSHOW (WM_USER + 2)
#define NIN_BALLOONHIDE (WM_USER + 3)
#define NIN_BALLOONTIMEOUT (WM_USER + 4)
#define NIN_BALLOONUSERCLICK (WM_USER + 5)
#endif
#define NIM_ADD 0x00000000
#define NIM_MODIFY 0x00000001
#define NIM_DELETE 0x00000002
#if (_WIN32_IE >= 0x0500)
#define NIM_SETFOCUS 0x00000003
#define NIM_SETVERSION 0x00000004
#define NOTIFYICON_VERSION 3
#endif
#define NIF_MESSAGE 0x00000001
#define NIF_ICON 0x00000002
#define NIF_TIP 0x00000004
#if (_WIN32_IE >= 0x0500)
#define NIF_STATE 0x00000008
#define NIF_INFO 0x00000010
#endif
#if (_WIN32_IE >= 0x600)
#define NIF_GUID 0x00000020
#endif
#if (_WIN32_IE >= 0x0500)
#define NIS_HIDDEN 0x00000001
#define NIS_SHAREDICON 0x00000002
// says this is the source of a shared icon
// Notify Icon Infotip flags
#define NIIF_NONE 0x00000000
// icon flags are mutually exclusive
// and take only the lowest 2 bits
#define NIIF_INFO 0x00000001
#define NIIF_WARNING 0x00000002
#define NIIF_ERROR 0x00000003
#if (_WIN32_IE >= 0x0600)
#define NIIF_USER 0x00000004
#endif
#define NIIF_ICON_MASK 0x0000000F
#if (_WIN32_IE >= 0x0501)
#define NIIF_NOSOUND 0x00000010
#endif
#endif
SHSTDAPI_(BOOL) Shell_NotifyIconA(DWORD dwMessage, PNOTIFYICONDATAA lpData);
SHSTDAPI_(BOOL) Shell_NotifyIconW(DWORD dwMessage, PNOTIFYICONDATAW lpData);
#ifdef UNICODE
#define Shell_NotifyIcon Shell_NotifyIconW
#else
#define Shell_NotifyIcon Shell_NotifyIconA
#endif // !UNICODE
////
//// End Tray Notification Icons
////
并在MFC工程的AfxStd.h文件加入
#define _WIN32_IE 0x0500 //为 IE 5.0 及更新版本改变为适当的值。
#endif
注:不修改会出现NIF_INFO未定义的编译错误
7.在TRAYICON中添加显示气泡函数,并写相应的函数体
BOOL ShowBalloonTip(LPCTSTR szMsg, LPCTSTR szTitle,
UINT uTimeout, DWORD dwInfoFlags=NIIF_INFO);
// Show balloon tip: use resource ID instead of LPCSTR.
BOOL ShowBalloonTip(UINT uID, LPCTSTR szTitle,
UINT uTimeout, DWORD dwInfoFlags=NIIF_INFO);
函数体:
// Show balloon tip: args give message, tiemout, etc.
//
BOOL CTrayIcon::ShowBalloonTip(LPCTSTR szMsg, LPCTSTR szTitle,
UINT uTimeout, DWORD dwInfoFlags)
{
m_nid.cbSize=sizeof(NOTIFYICONDATA);
m_nid.uFlags = NIF_INFO;
m_nid.uTimeout = uTimeout;
m_nid.dwInfoFlags = dwInfoFlags;
strcpy(m_nid.szInfo,szMsg ? szMsg : _T(""));
strcpy(m_nid.szInfoTitle,szTitle ? szTitle : _T(""));
return Shell_NotifyIcon(NIM_MODIFY, &m_nid);
}
BOOL CTrayIcon::ShowBalloonTip(UINT uID, LPCTSTR szTitle,
UINT uTimeout, DWORD dwInfoFlags)
{
CString s;
return s.LoadString(uID) ?
ShowBalloonTip(s, szTitle, uTimeout, dwInfoFlags) : FALSE;
}
使用的时候直接调用该函数即可
注:当explorer异常重启时,程序无法找回托盘图标,找回方法会在后续添加