配置分为2个部分
service
第一步 安装rsync-3.0.7.tar.gz
tar xvzf rsync-3.0.7.tar.gz
./configure
make
make install
启动rsync
/etc/init.d/xinetd start
配置/etc/rsyncd.conf
vi /etc/rsyncd.conf
uid = root
gid = root
use chroot = no
max connections = 10
strict modes = yes
port = 873
address = 192.168.133.128
[backup]
path = /home/backup/
comment = this is a test
ignore errors
read only = yes
list = no
auth users = root
secrets file = /etc/rsync.pas
hosts allow = 192.168.133.150
hosts deny = 0.0.0.0/0
pid file = /var/run/rsyncd.pid
lock file = /var/run/rsync.lock
log file = /var/log/rsyncd.log
配置/etc/rsync.pas 在服务器端,必须加入登陆名和密码,在client上,只需要输入密码
[root@bogon test]# vi /etc/rsync.pas
root:111111
配置/etc/rsync.motd
[root@bogon test11]# vi /etc/rsyncd.motd
welcome to use the rsync services!
client
安装sync-3.0.7.tar.gz
tar xvzf rsync-3.0.7.tar.gz
./configure
make
make install
启动rsync
/etc/init.d/xinetd start
然后在客户端输入命令同步:
rsync -auzv --progress --password-file=/etc/rsync.pas root@192.168.133.128::backup1 /home/test
请注意backup1 /home/test这个就是client端备份的地址
如果需要系统自动同步
1客户端必须配置密码文件 /etc/rsync.pas 给与相关权限chmod 600 /etc/rsync.pas
2在crontab中增加一条命令,设置多久自动执行一次。
3为了安全,建议增加一条iptables命令
如果需要多个不同目录支持同步,再增加一个[backup1]
path = /home/test
comment = this is a test
ignore errors
read only = yes
list = no
auth users = root
secrets file = /etc/rsync.pas
hosts allow = 192.168.133.150
hosts deny = 0.0.0.0/0
pid file = /var/run/rsyncd.pid
lock file = /var/run/rsync.lock
log file = /var/log/rsyncd.log
然后在客户端输入命令同步
rsync -auzv --progress --password-file=/etc/rsync.pas root@192.168.133.128::backup /home/
配置过程问题:
问题1:
在client上遇到问题:
rsync -auzv --progress --password-file=/etc/rsync.pas root@192.168.133.128::backup /home/
rsync: could not open password file "/etc/rsync.pas": No such file or directory (2)
Password:
@ERROR: auth failed on module backup
rsync error: error starting client-server protocol (code 5) at main.c(1506) [Receiver=3.0.7]
遇到这个问题:client端没有设置/etc/rsync.pas这个文件,而在使用rsync命令的时候,加了这个参数--
password-file=/etc/rsync.pas
问题2:
rsync -auzv --progress --password-file=/etc/rsync.pas root@192.168.133.128::backup /home/
@ERROR: auth failed on module backup
rsync error: error starting client-server protocol (code 5) at main.c(1506) [Receiver=3.0.7]
遇到这个问题:client端已经设置/etc/rsync.pas这个文件,里面也设置了密码111111,和服务器一致,但是
服务器段设置有错误,服务器端应该设置/etc/rsync.pas ,里面内容root:111111 ,这里登陆名不可缺少
问题3:
rsync -auzv --progress --password-file=/etc/rsync.pas root@192.168.133.128::backup /home/
@ERROR: chdir failed
rsync error: error starting client-server protocol (code 5) at main.c(1506) [Receiver=3.0.7]
遇到这个问题,是因为服务器端的/home/backup 其中backup这个目录并没有设置,所以提示:chdir failed
问题4:
rsync: write failed on "/home/backup2010/wensong": No space left on device (28)
rsync error: error in file IO (code 11) at receiver.c(302) [receiver=3.0.7]
rsync: connection unexpectedly closed (2721 bytes received so far) [generator]
rsync error: error in rsync protocol data stream (code 12) at io.c(601) [generator=3.0.7]
磁盘空间不够,所以无法操作。
可以通过df /home/backup2010 来查看可用空间和已用空间
问题5:网络收集问题
1、权限问题
类似如下的提示:rsync: opendir "/kexue" (in dtsChannel) failed: Permission denied (13)注意查看同步的目录权限是否为755
2、time out
rsync: failed to connect to 203.100.192.66: Connection timed out (110)
rsync error: error in socket IO (code 10) at clientserver.c(124) [receiver=3.0.5]
检查服务器的端口netstat –tunlp,远程telnet测试。
3、服务未启动
rsync: failed to connect to 10.10.10.170: Connection refused (111)
rsync error: error in socket IO (code 10) at clientserver.c(124) [receiver=3.0.5]
启动服务:rsync --daemon --config=/etc/rsyncd.conf
4、磁盘空间满
rsync: recv_generator: mkdir "/teacherclubBackup/rsync……" failed: No space left on device (28)
*** Skipping any contents from this failed directory ***
5、Ctrl+C或者大量文件
rsync error: received SIGINT, SIGTERM, or SIGHUP (code 20) at rsync.c(544) [receiver=3.0.5]
rsync error: received SIGINT, SIGTERM, or SIGHUP (code 20) at rsync.c(544) [generator=3.0.5]
6、xnetid启动
rsync: read error: Connection reset by peer (104)
rsync error: error in rsync protocol data stream (code 12) at io.c(759) [receiver=3.0.5]
查看rsync日志
rsync: unable to open configuration file "/etc/rsyncd.conf": No such file or directory
xnetid查找的配置文件位置默认是/etc下,根据具体情况创建软链接。例如:
ln -s /etc/rsyncd/rsyncd.conf /etc/rsyncd.conf
或者更改指定默认的配置文件路径,在/etc/xinetd.d/rsync配置文件中