Netapp FCP配置
headb> fcp start
fcp: No FCP Target Adapters are present in this system.
headb> fcp config
fcp: No FCP Target Adapters are present in this system.
以上错误说明fcmode不正确，要用target模式，使用下列方法修改
headb> fcadmin config
Local
Adapter Type State Status
---------------------------------------------------
0a initiator CONFIGURED. offline
0b initiator CONFIGURED. Offline
headb> fcadmin config -d 0a
Mon Sep 19 15:59:38 CEST [headb: fci.adapter.offlining:info]: Offlining Fibre Channel adapter 0a.
Mon Sep 19 15:59:38 CEST [headb: fci.adapter.offline:info]: Fibre Channel adapter 0a is now offline.
headb> fcadmin config -t target 0a
Mon Sep 19 15:59:54 CEST [headb: fci.config.state:info]: Fibre channel initiator adapter 0a is in the PENDING (target) state.
A reboot is required for the new adapter configuration to take effect.
headb>
headb> fcadmin config -d 0b
Mon Sep 19 16:00:00 CEST [headb: fci.adapter.offlining:info]: Offlining Fibre Channel adapter 0b.
Mon Sep 19 16:00:01 CEST [headb: fci.adapter.offline:info]: Fibre Channel adapter 0b is now offline.
headb> fcadmin config -t target 0b
Mon Sep 19 16:00:40 CEST [headb: fci.config.state:info]: Fibre channel initiator adapter 0b is in the PENDING (target) state.
A reboot is required for the new adapter configuration to take effect.
headb> fcadmin config
Local
Adapter Type State Status
---------------------------------------------------
0a initiator PENDING (target) offline
0b initiator PENDING (target) offline
headb>rebbot
headb>fcp start
headb> fcadmin config
Local
Adapter Type State Status
---------------------------------------------------
0a target CONFIGURED online
0b target CONFIGURED online
headb> fcp status
FCP service is running.
