为了实现 QLineEdit 获取焦点/获取焦点后全选字符的功能,在网上先查了 QLineEdit 获取焦点的方法,有两种:
1 此方法只有在窗体从失去焦点到获取焦点时有作用:即窗体失去焦点后再次获取焦点时,将焦点置于某个 QLineEdit 中。
此功能明显不是偶想要的!!! 但由于网上现有的文章都是一样的,说的不是很清楚,所以只有试了才知道。
有三段代码:
1) 在窗体初始化时增加如下代码:
1 // QLineEdit 获取焦点 1 - 此方法错误: 只有在窗体从失去焦点到获取焦点时有作用
2 ui->ledSendStr->installEventFilter(this);
3 ui->ledSendFile->installEventFilter(this);
4 ui->ledSendPreTime->installEventFilter(this);
2) 在窗体的 .h 文件中声明 SLOT,如下:
1 public slots:
2 bool eventFilter(QObject *,QEvent *); // QLineEdit 获取焦点 2
3) 实现的代码
1 // QLineEdit 获取焦点 3
2 bool MainWindow::eventFilter(QObject *watched, QEvent *event)
3 {
4 if(watched == ledSendStr)
5 {
6 if(QEvent::FocusIn == event->type())
7 {
8 qDebug() << "focus in";
9 ledSendStr->selectAll(); // 不起使用,只有在窗体获取到焦点时才有功能
10 ledSendStr->setFocus(Qt::OtherFocusReason);
11 }
12 else if(QEvent::FocusOut == event->type())
13 {
14 qDebug() << "focus out";
15 }
16 }
17 else if(watched == ledSendFile)
18 {
19 }
20 else if(watched == ledSendPreTime)
21 {
22 }
23 return QWidget::eventFilter(watched,event); // 最后将事件交给上层对话框
24 }
2 继承 QLineEdit, 再实现如下两个 SIGNAL:
virtual void focusInEvent(QFocusEvent *e);
virtual void focusOutEvent(QFocusEvent *e);
1) 继承类的声明:
1 #ifndef MYLINEEDIT_H
2 #define MYLINEEDIT_H
3
4 #include <QLineEdit>
5 #include <QDebug>
6
7 class MyLineEdit: public QLineEdit
8 {
9 Q_OBJECT
10
11 public:
12 MyLineEdit(QWidget *parent=0);
13 ~MyLineEdit();
14
15 protected:
16 virtual void focusInEvent(QFocusEvent *e);
17 virtual void focusOutEvent(QFocusEvent *e);
18 };
19
20 #endif // MYLINEEDIT_H
2) 继承类的实现:
1 #include "myLineEdit.h"
2
3 MyLineEdit::MyLineEdit(QWidget *parent):QLineEdit(parent)
4 {
5 }
6
7 MyLineEdit::~MyLineEdit()
8 {
9 }
10
11 void MyLineEdit::focusInEvent(QFocusEvent *e)
12 {
13 // qDebug() << "*MyLineEdit::focusInEvent" << this->objectName();
14
15 QPalette pGreen = QPalette();
16 pGreen.setColor(QPalette::Base,Qt::gray); //QPalette::Base 对可编辑输入框有效,还有其他类型,具体的查看文档
17 setPalette(pGreen);
18
19 ledSendStr->selectAll(); // 不起使用,只有在窗体获取到焦点时才有功能
20 ledSendStr->setFocus(Qt::OtherFocusReason);
21 }
22
23 void MyLineEdit::focusOutEvent(QFocusEvent *e)
24 {
25 // qDebug() << "*MyLineEdit::focusOutEvent" << this->objectName();
26
27 QPalette pWhite = QPalette();
28 pWhite.setColor(QPalette::Base,Qt::white);
29 setPalette(pWhite);
30 }
3) 使用 MyLineEdit 类定义控件,并完成布局。
测试运行发现,3) 中定义的控件随着焦点的获取/失去颜色会发生变化,但全选字符串的功能却无效!
但如果在如下代码:
1 ledSendStr->selectAll();
2 ledSendStr->setFocus(Qt::OtherFocusReason);
放在一个按键的 Clicked 槽中就可以实现全选字符串的功能。 为什么无效呢???原因不知道,想到的区别就是同样的代码,一个是在 MainWindow 中、而另一个是在 myLineEdit 中。
试着将 Focus Get/Lost 动作放到 MainWindow 中响应:通过 SIGNAL/SLOT 来实现。 1) 在继承类的声明中增加如下代码:
1 signals:
2 void selectAllWhenFocus(QString strCtrlName);
2) 在继承类实现的 void MyLineEdit::focusInEvent(QFocusEvent *e) 函数中增加如下代码:
1 emit selectAllWhenFocus(this->objectName());
3) 在 MainWindow 的 .h 文件中增加如下代码:
1 public slots:
2 void selectAllWhenFocusSlot(QString strCtrlName);
4) 在 MainWindow 的源代码中增加如下代码:
1 void MainWindow::selectAllWhenFocusSlot(QString strCtrlName)
2 {
3 // qDebug() << "Main Windows: " << strCtrlName;
4
5 ledSendStr->selectAll();
6 ledSendStr->setFocus(Qt::OtherFocusReason);
7 }
但发现一样无法实现全选控件中字符串的功能。 无语......
最后无奈下想到延时一下,再做全选的动作。修改上述第四步的代码如下:
1 void MainWindow::selectAllWhenFocusSlot(QString strCtrlName)
2 {
3 // qDebug() << "Main Windows: " << strCtrlName;
4
5 m_strCtrlName = strCtrlName;
6 if(NULL != m_timerDelaySelect)
7 {
8 if(m_timerDelaySelect->isActive())
9 {
10 m_timerDelaySelect->stop();
11 }
12 delete m_timerDelaySelect;
13 m_timerDelaySelect = NULL;
14 }
15 m_timerDelaySelect = new QTimer(this);
16 //新建定时器
17 connect(m_timerDelaySelect,SIGNAL(timeout()),this,SLOT(timerUpDateSeleceAll()));
18 m_timerDelaySelect->start(200);
19 }
和延时超时的处理函数:
1 void MainWindow::timerUpDateSeleceAll()
2 {
3 if(m_strCtrlName == "ledSendPreTime")
4 {
5 ledSendPreTime->selectAll();
6 ledSendPreTime->setFocus(Qt::OtherFocusReason);
7 }
8 else if(m_strCtrlName == "ledSendStr")
9 {
10 ledSendStr->selectAll();
11 ledSendStr->setFocus(Qt::OtherFocusReason);
12 }
13 else if(m_strCtrlName == "ledSendFile")
14 {
15 ledSendFile->selectAll();
16 ledSendFile->setFocus(Qt::OtherFocusReason);
17 }
18
19 if(NULL != m_timerDelaySelect)
20 {
21 if(m_timerDelaySelect->isActive())
22 {
23 m_timerDelaySelect->stop();
24 }
25 delete m_timerDelaySelect;
26 m_timerDelaySelect = NULL;
27 }
28 }
发现这样全选控件中文符串的功能竟然实现了!!!
在实现上述功能时,遇到的第一个问题其实不是代码,而不是 Layout 的问题: 之前所有控件是“拖”出来的,然后进行了 Layout 处理。忽然发现按上述修改,使用 MyLineEdit 类定义的第个控件是在代码中定义的,无法像之前一样“拖”到窗体中、并完成 Layout! 还好 QT 的代码 Layout 功能比较强大。最后两者结合才完成了想要的窗体 Layout。