绘制平行线不是一件容易的事.使用简单的均匀偏移当然不会显示所需的结果.这显示在下面的左图中.

这种简单的偏移可以在matplotlib中产生,如

transformation tutorial所示.


方法1

更好的解决方案可能是使用右侧勾勒出的想法.为了计算第n个点的偏移,我们可以使用法线向量到第n-1和第n个点之间的直线,并沿着该法向量使用相同的距离来计算偏移点.

这种方法的优点是我们在原始行中的点数与在偏移行中的点数相同.缺点是它不完全准确,如图所示.

此方法在下面的代码中的函数偏移量中实现.

为了使这对matplotlib图有用,我们需要考虑线宽应该独立于数据单元.线宽通常以点为单位给出,并且偏移最好以相同的单位给出,例如,可以满足问题的要求(“宽度为3的两条平行线”).

因此,我们的想法是使用ax.transData.transform将坐标从数据转换为显示坐标.点o的偏移也可以转换为相同的单位：使用dpi和标准的ppi = 72,显示坐标的偏移量为o * dpi / ppi.在应用了显示坐标中的偏移之后,逆变换(ax.transData.inverted().变换)允许反向变换.

现在还有另一个问题：如何确保偏移量保持不变,与图形的缩放和大小无关？

每次调整大小调整事件的大小时,可以通过重新计算偏移来解决最后一点.

以下是此方法产生的彩虹曲线的外观.


这是生成图像的代码.

import numpy as np
import matplotlib.pyplot as plt
dpi = 100
def offset(x,y, o):
""" Offset coordinates given by array x,y by o """
X = np.c_[x,y].T
m = np.array([[0,-1],[1,0]])
R = np.zeros_like(X)
S = X[:,2:]-X[:,:-2]
R[:,1:-1] = np.dot(m, S)
R[:,0] = np.dot(m, X[:,1]-X[:,0])
R[:,-1] = np.dot(m, X[:,-1]-X[:,-2])
On = R/np.sqrt(R[0,:]**2+R[1,:]**2)*o
Out = On+X
return Out[0,:], Out[1,:]
def offset_curve(ax, x,y, o):
""" Offset array x,y in data coordinates
by o in points """
trans = ax.transData.transform
inv = ax.transData.inverted().transform
X = np.c_[x,y]
Xt = trans(X)
xto, yto = offset(Xt[:,0],Xt[:,1],o*dpi/72. )
Xto = np.c_[xto, yto]
Xo = inv(Xto)
return Xo[:,0], Xo[:,1]
# some single points
y = np.array([1,2,2,3,3,0])
x = np.arange(len(y))
#or try a sinus
x = np.linspace(0,9)
y=np.sin(x)*x/3.
fig, ax=plt.subplots(figsize=(4,2.5), dpi=dpi)
cols = ["#fff40b", "#00e103", "#ff9921", "#3a00ef", "#ff2121", "#af00e7"]
lw = 2.
lines = []
for i in range(len(cols)):
l, = plt.plot(x,y, lw=lw, color=cols[i])
lines.append(l)
def plot_rainbow(event=None):
xr = range(6); yr = range(6);
xr[0],yr[0] = offset_curve(ax, x,y, lw/2.)
xr[1],yr[1] = offset_curve(ax, x,y, -lw/2.)
xr[2],yr[2] = offset_curve(ax, xr[0],yr[0], lw)
xr[3],yr[3] = offset_curve(ax, xr[1],yr[1], -lw)
xr[4],yr[4] = offset_curve(ax, xr[2],yr[2], lw)
xr[5],yr[5] = offset_curve(ax, xr[3],yr[3], -lw)
for i in range(6):
lines[i].set_data(xr[i], yr[i])
plot_rainbow()
fig.canvas.mpl_connect("resize_event", plot_rainbow)
fig.canvas.mpl_connect("button_release_event", plot_rainbow)
plt.savefig(__file__+".png", dpi=dpi)
plt.show()

方法2

为避免重叠线,必须使用更复杂的解决方案.

可以首先将每个垂直于它所属的两个线段的点偏移(下图中的绿点).然后计算通过这些偏移点的直线并找到它们的交点.


特定情况是两个后续线段的斜率相等.必须注意这一点(下面的代码中的eps).

from __future__ import division
import numpy as np
import matplotlib.pyplot as plt
dpi = 100
def intersect(p1, p2, q1, q2, eps=1.e-10):
""" given two lines, first through points pn, second through qn,
find the intersection """
x1 = p1[0]; y1 = p1[1]; x2 = p2[0]; y2 = p2[1]
x3 = q1[0]; y3 = q1[1]; x4 = q2[0]; y4 = q2[1]
nomX = ((x1*y2-y1*x2)*(x3-x4)- (x1-x2)*(x3*y4-y3*x4))
denom = float( (x1-x2)*(y3-y4) - (y1-y2)*(x3-x4) )
nomY = (x1*y2-y1*x2)*(y3-y4) - (y1-y2)*(x3*y4-y3*x4)
if np.abs(denom) < eps:
#print "intersection undefined", p1
return np.array( p1 )
else:
return np.array( [ nomX/denom , nomY/denom ])
def offset(x,y, o, eps=1.e-10):
""" Offset coordinates given by array x,y by o """
X = np.c_[x,y].T
m = np.array([[0,-1],[1,0]])
S = X[:,1:]-X[:,:-1]
R = np.dot(m, S)
norm = np.sqrt(R[0,:]**2+R[1,:]**2) / o
On = R/norm
Outa = On+X[:,1:]
Outb = On+X[:,:-1]
G = np.zeros_like(X)
for i in xrange(0, len(X[0,:])-2):
p = intersect(Outa[:,i], Outb[:,i], Outa[:,i+1], Outb[:,i+1], eps=eps)
G[:,i+1] = p
G[:,0] = Outb[:,0]
G[:,-1] = Outa[:,-1]
return G[0,:], G[1,:]
def offset_curve(ax, x,y, o, eps=1.e-10):
""" Offset array x,y in data coordinates
by o in points """
trans = ax.transData.transform
inv = ax.transData.inverted().transform
X = np.c_[x,y]
Xt = trans(X)
xto, yto = offset(Xt[:,0],Xt[:,1],o*dpi/72., eps=eps )
Xto = np.c_[xto, yto]
Xo = inv(Xto)
return Xo[:,0], Xo[:,1]
# some single points
y = np.array([1,1,2,0,3,2,1.,4,3]) *1.e9
x = np.arange(len(y))
x[3]=x[4]
#or try a sinus
#x = np.linspace(0,9)
#y=np.sin(x)*x/3.
fig, ax=plt.subplots(figsize=(4,2.5), dpi=dpi)
cols = ["r", "b"]
lw = 11.
lines = []
for i in range(len(cols)):
l, = plt.plot(x,y, lw=lw, color=cols[i], solid_joinstyle="miter")
lines.append(l)
def plot_rainbow(event=None):
xr = range(2); yr = range(2);
xr[0],yr[0] = offset_curve(ax, x,y, lw/2.)
xr[1],yr[1] = offset_curve(ax, x,y, -lw/2.)
for i in range(2):
lines[i].set_data(xr[i], yr[i])
plot_rainbow()
fig.canvas.mpl_connect("resize_event", plot_rainbow)
fig.canvas.mpl_connect("button_release_event", plot_rainbow)
plt.show()


请注意,只要线条之间的偏移小于线条上后续点之间的距离,此方法就可以正常工作.否则方法1可能更适合.