一、划分配置IP地址
如图
二、构建R3-5-6-7的MGRE环境
要求R3为中心则R5、6、7到R3上进行注册
R1
[r3-Tunnel0/0/0]interface Tunnel0/0/0 创建tunnel口
[r3-Tunnel0/0/0]ip address 10.1.1.1 255.255.255.0 配置接口ip地址
[r3-Tunnel0/0/0]tunnel-protocol gre p2mp 先修改接口模式为多点GRE
[r3-Tunnel0/0/0]source 172.16.6.1 再定义公有的源IP地址
[r3-Tunnel0/0/0]nhrp entry multicast dynamic 本地成为NHRP中心，同时可以进行伪广播
[r3-Tunnel0/0/0]nhrp network-id 100 默认为0号，该网段内所有节点tunnel接口必须为相同域此处列举R5的配置
[r5-Tunnel0/0/0]interface Tunnel0/0/0
[r5-Tunnel0/0/0]ip address 10.1.1.5 255.255.255.0
[r5-Tunnel0/0/0]tunnel-protocol gre p2mp
[r5-Tunnel0/0/0]source GigabitEthernet0/0/0 假设分支站点ip地址不固定
[r5-Tunnel0/0/0]nhrp network-id 100
[r5-Tunnel0/0/0]nhrp entry 10.1.1.1 172.16.6.1 register 分支需要到中心站点注册三、访问ISP环回
则需要区域0内各个ABR都写一条指向ISP的缺省路由，且使用NAT
而R6 R7的acl规则中还需要放行区域4和rip区域的流量
此处列举R3的配置
[r3]ip route-static 0.0.0.0 0 172.16.6.2
[r3]acl 2000
[r3-acl-basic-2000]rule permit source 172.16.1.0 0.0.0.255
[r3]int g0/0/1
[r3-GigabitEthernet0/0/1]nat outbound 2000四、启用OSPF
需要注意的是，区域0中启用OSPF是需要宣告Tunnel口
此处列举R7的ospf信息
[r7]ospf 1
[r7-ospf-1]a 0
[r7-ospf-1-area-0.0.0.0]dis th
[V200R003C00]
#
area 0.0.0.0
network 10.1.1.7 0.0.0.0
network 172.16.10.0 0.0.0.255
#
return而区域4为远离了骨干的非骨干区域
要利用多进程双向重发布
在非法ABR处，将不同区域的接口宣告到不同进程中，形成独立的数据库；之后使用重发布技术来实现路由共享，全网可达；不担心选路问题，资源占用问题；
要在R9中同时启用两个进程的OSPF来解决其无法正常学习到路由的情况
[r9]ospf 1
[r9-ospf-1]import-route ospf 2 导入OSPF 2
[r9-ospf-1]q
[r9]ospf 2
[r9-ospf-2]import-route ospf 1 导入OSPF 1
[r9-ospf-1-area-0.0.0.3]dis th
[V200R003C00]
#
area 0.0.0.3
network 172.16.3.0 0.0.0.255
nssa no-summary
#
return
[r9-ospf-2-area-0.0.0.4]dis th
[V200R003C00]
#
area 0.0.0.4
abr-summary 172.16.4.0 255.255.255.0
network 172.16.4.0 0.0.0.255
#
return区域2连接了使用不同路由协议的区域
利用重发布（多协议间利用ASBR）
也就是在R12（ASBR）上面进行配置导入RIP的路由
[r12-ospf-1]import-route rip 将rip重发布到OSPF的进程1五、减少OSPF的LSA更新量
1、汇总
区域1、2、3、4能进行域间路由汇总，汇总3类LSA
此处列举区域1的R1（ABR）的配置
[r3]ospf 1
[r3-ospf-1]area 1 来源区域（一定是ABR通过该区域的1、2类计算所得路由）
[r3-ospf-1-area-0.0.0.1]abr-summary 172.16.1.0 255.255.255.0使用RIP的区域需要域外路由汇总
也可以使用RIP的区域需要在更新源路由器上，所有更新发出的接口上配置，进行手工汇总
[r12]ospf 1
[r12-ospf-1]import-route rip 重发布
[r12-ospf-1]asbr-summary 172.16.5.0 255.255.255.0
[r12]int g0/0/1
[r12-GigabitEthernet0/0/0]rip summary-address 172.16.5.0 255.255.255.02、配置特殊区域
经分析区域1可配置为末梢区域
该区域将拒绝4/5的LSA；由该区域同时连接骨干区域的ABR，向该区域发布一条3类的缺省
拒绝3类的LSA；仅保留一条3类的缺省；
先将该区域配置为末梢区域，然后仅在ABR上进行完全配置即可
该区域所有设备均需配置，否则无法建立邻居关系
此处列举R3（ABR）的配置
[r3]ospf 1
[r3-ospf-1]area 2
[r3-ospf-1-area-0.0.0.1]stub
[r3-ospf-1-area-0.0.0.1]stub no-summary区域2和区域3存在ASBR，则将他们设置为完全NSSA
拒绝4/5的LSA；主要用于拒绝网络中，该区域以外的区域产生的4/5类LSA，进入该NSSA区域；原属于该区域的5类LSA，以7类的名义发向骨干区域；在进入骨干时由ABR兼职ASBR，进行7转5；
在华为设备中，由该NSSA区域连接骨干的ABR向内发布一条7类的缺省；
在cisco设备中，不发布，需要管理员手工发布；
完全NSSA –在NSSA的基础上，近一步拒绝3类的LSA；再由该区域连接骨干的ABR，向内部发送一条3类的缺省；
先将该区域配置为NSSA区域，然后仅在ABR上配置完全即可；
也是该区域每台设备均需配置，不然无法建立邻居关系
此处列举R7的配置
[r7]ospf 1
[r7-ospf-1]area 3
[r7-ospf-1-area-0.0.0.3]nssa no-summary还需要向各个ABR下放缺省路由,，保障区域通信正常
[R9-ospf-2]default-route-advertise六、保障更新安全
配置认证
[r3]ospf 1
[r3-ospf-1]area 1
[r3-ospf-1-area-0.0.0.1]authentication-mode md5 1 cipher 123456
配置完成后，该设备所有属于区域1的接口全部基于该秘钥认证七、查看LSDB
R5
[r5-ospf-1]dis ospf lsdb
OSPF Process 1 with Router ID 5.5.5.5
Link State Database
Area: 0.0.0.0
Type LinkState ID AdvRouter Age Len Sequence Metric
Router 7.7.7.7 7.7.7.7 494 48 80000006 0
Router 6.6.6.6 6.6.6.6 448 48 80000005 0
Router 5.5.5.5 5.5.5.5 1558 48 80000005 0
Router 3.3.3.3 3.3.3.3 1013 36 8000000B 1562
Network 10.1.1.1 3.3.3.3 1013 40 80000005 0
Sum-Net 172.16.3.0 7.7.7.7 77 28 80000007 2
Sum-Net 172.16.2.0 6.6.6.6 216 28 80000006 2
Sum-Net 172.16.1.0 3.3.3.3 400 28 80000005 1
AS External Database
Type LinkState ID AdvRouter Age Len Sequence Metric
External 0.0.0.0 7.7.7.7 494 36 80000001 1
External 0.0.0.0 6.6.6.6 448 36 80000001 1
External 172.16.4.0 9.9.9.9 201 36 80000003 2
External 172.16.4.0 7.7.7.7 76 36 80000001 2
External 172.16.5.0 12.12.12.12 399 36 80000003 2
External 172.16.5.0 6.6.6.6 216 36 80000001 2
External 172.16.2.16 12.12.12.12 428 36 80000002 1R3
[r3-ospf-1-area-0.0.0.1]dis ospf lsdb
OSPF Process 1 with Router ID 3.3.3.3
Link State Database
Area: 0.0.0.0
Type LinkState ID AdvRouter Age Len Sequence Metric
Router 7.7.7.7 7.7.7.7 660 48 80000006 0
Router 6.6.6.6 6.6.6.6 614 48 80000005 0
Router 5.5.5.5 5.5.5.5 1726 48 80000005 0
Router 3.3.3.3 3.3.3.3 1179 36 8000000B 1562
Network 10.1.1.1 3.3.3.3 1179 40 80000005 0
Sum-Net 172.16.3.0 7.7.7.7 242 28 80000007 2
Sum-Net 172.16.2.0 6.6.6.6 382 28 80000006 2
Sum-Net 172.16.1.0 3.3.3.3 566 28 80000005 1
Area: 0.0.0.1
Type LinkState ID AdvRouter Age Len Sequence Metric
Router 2.2.2.2 2.2.2.2 516 48 80000005 0
Router 1.1.1.1 1.1.1.1 516 48 80000005 0
Router 3.3.3.3 3.3.3.3 518 48 80000006 0
Network 172.16.1.3 3.3.3.3 519 36 80000002 0
Sum-Net 0.0.0.0 3.3.3.3 566 28 80000001 1
AS External Database
Type LinkState ID AdvRouter Age Len Sequence Metric
External 0.0.0.0 7.7.7.7 660 36 80000001 1
External 0.0.0.0 6.6.6.6 614 36 80000001 1
External 172.16.4.0 9.9.9.9 367 36 80000003 2
External 172.16.4.0 7.7.7.7 241 36 80000001 2
External 172.16.5.0 12.12.12.12 565 36 80000003 2
External 172.16.5.0 6.6.6.6 382 36 80000001 2
External 172.16.2.16 12.12.12.12 594 36 80000002 1R6
[r6-ospf-1-area-0.0.0.2]dis ospf lsdb
OSPF Process 1 with Router ID 6.6.6.6
Link State Database
Area: 0.0.0.0
Type LinkState ID AdvRouter Age Len Sequence Metric
Router 7.7.7.7 7.7.7.7 691 48 80000006 0
Router 6.6.6.6 6.6.6.6 644 48 80000005 0
Router 5.5.5.5 5.5.5.5 1757 48 80000005 0
Router 3.3.3.3 3.3.3.3 1210 36 8000000B 1562
Network 10.1.1.1 3.3.3.3 1210 40 80000005 0
Sum-Net 172.16.3.0 7.7.7.7 274 28 80000007 2
Sum-Net 172.16.2.0 6.6.6.6 411 28 80000006 2
Sum-Net 172.16.1.0 3.3.3.3 598 28 80000005 1
Area: 0.0.0.2
Type LinkState ID AdvRouter Age Len Sequence Metric
Router 6.6.6.6 6.6.6.6 411 36 80000005 1
Router 11.11.11.11 11.11.11.11 409 60 80000006 0
Router 12.12.12.12 12.12.12.12 416 36 80000004 1
Network 172.16.2.18 11.11.11.11 414 32 80000002 0
Network 172.16.2.1 11.11.11.11 411 32 80000002 0
Sum-Net 0.0.0.0 6.6.6.6 462 28 80000001 1
NSSA 0.0.0.0 6.6.6.6 462 36 80000001 1
NSSA 172.16.5.0 12.12.12.12 434 36 80000001 2
NSSA 172.16.2.16 12.12.12.12 434 36 80000001 1
AS External Database
Type LinkState ID AdvRouter Age Len Sequence Metric
External 0.0.0.0 6.6.6.6 644 36 80000001 1
External 172.16.5.0 6.6.6.6 411 36 80000001 2
External 0.0.0.0 7.7.7.7 691 36 80000001 1
External 172.16.4.0 9.9.9.9 398 36 80000003 2
External 172.16.4.0 7.7.7.7 273 36 80000001 2
External 172.16.5.0 12.12.12.12 595 36 80000003 2
External 172.16.2.16 12.12.12.12 624 36 80000002 1R7
[r7-ospf-1-area-0.0.0.3]dis ospf lsdb
OSPF Process 1 with Router ID 7.7.7.7
Link State Database
Area: 0.0.0.0
Type LinkState ID AdvRouter Age Len Sequence Metric
Router 7.7.7.7 7.7.7.7 722 48 80000006 0
Router 6.6.6.6 6.6.6.6 678 48 80000005 0
Router 5.5.5.5 5.5.5.5 1790 48 80000005 0
Router 3.3.3.3 3.3.3.3 1243 36 8000000B 1562
Network 10.1.1.1 3.3.3.3 1243 40 80000005 0
Sum-Net 172.16.3.0 7.7.7.7 304 28 80000007 2
Sum-Net 172.16.2.0 6.6.6.6 446 28 80000006 2
Sum-Net 172.16.1.0 3.3.3.3 630 28 80000005 1
Area: 0.0.0.3
Type LinkState ID AdvRouter Age Len Sequence Metric
Router 7.7.7.7 7.7.7.7 353 36 80000005 1
Router 9.9.9.9 9.9.9.9 304 36 80000005 1
Router 8.8.8.8 8.8.8.8 306 60 80000007 0
Network 172.16.3.17 9.9.9.9 305 32 80000002 0
Network 172.16.3.2 7.7.7.7 353 32 80000002 0
Sum-Net 0.0.0.0 7.7.7.7 401 28 80000001 1
NSSA 0.0.0.0 7.7.7.7 401 36 80000001 1
NSSA 172.16.4.0 9.9.9.9 344 36 80000001 2
AS External Database
Type LinkState ID AdvRouter Age Len Sequence Metric
External 0.0.0.0 7.7.7.7 722 36 80000001 1
External 172.16.4.0 7.7.7.7 303 36 80000001 2
External 0.0.0.0 6.6.6.6 678 36 80000001 1
External 172.16.4.0 9.9.9.9 429 36 80000003 2
External 172.16.5.0 12.12.12.12 629 36 80000003 2
External 172.16.5.0 6.6.6.6 446 36 80000001 2
External 172.16.2.16 12.12.12.12 658 36 80000002 1八、调整
因为nssa会向内发布一条缺省路由
则需要在区域0的各个ABR上配置空接口防止环路产生
此处列举R3
[r3]ip route-static 172.16.1.0 24 NULL 0八、测试
R5路由表
[r5-ospf-1]dis ip ro pro ospf
Route Flags: R - relay, D - download to fib
------------------------------------------------------------------------------
Public routing table : OSPF
Destinations : 8 Routes : 9
OSPF routing table status : <Active>
Destinations : 7 Routes : 7
Destination/Mask Proto Pre Cost Flags NextHop Interface
172.16.1.0/24 OSPF 10 1563 D 10.1.1.1 Tunnel0/0/0
172.16.2.0/24 OSPF 10 1564 D 10.1.1.6 Tunnel0/0/0
172.16.3.0/24 OSPF 10 1564 D 10.1.1.7 Tunnel0/0/0
172.16.4.0/24 O_ASE 150 2 D 10.1.1.7 Tunnel0/0/0
172.16.5.0/24 O_ASE 150 2 D 10.1.1.6 Tunnel0/0/0
172.16.10.17/32 OSPF 10 1562 D 10.1.1.6 Tunnel0/0/0
172.16.10.33/32 OSPF 10 1562 D 10.1.1.7 Tunnel0/0/0R1 访问 ISP
[r1]PING 4.4.4.4
PING 4.4.4.4: 56 data bytes, press CTRL_C to break
Reply from 4.4.4.4: bytes=56 Sequence=1 ttl=254 time=80 ms
Reply from 4.4.4.4: bytes=56 Sequence=2 ttl=254 time=50 ms
Reply from 4.4.4.4: bytes=56 Sequence=3 ttl=254 time=50 ms
Reply from 4.4.4.4: bytes=56 Sequence=4 ttl=254 time=40 ms
Reply from 4.4.4.4: bytes=56 Sequence=5 ttl=254 time=50 ms
--- 4.4.4.4 ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 40/54/80 msR1访问R12环回
[r1]ping 172.16.5.1
PING 172.16.5.1: 56 data bytes, press CTRL_C to break
Reply from 172.16.5.1: bytes=56 Sequence=1 ttl=252 time=80 ms
Reply from 172.16.5.1: bytes=56 Sequence=2 ttl=252 time=60 ms
Reply from 172.16.5.1: bytes=56 Sequence=3 ttl=252 time=80 ms
Reply from 172.16.5.1: bytes=56 Sequence=4 ttl=252 time=80 ms
Reply from 172.16.5.1: bytes=56 Sequence=5 ttl=252 time=60 ms
--- 172.16.5.1 ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 60/72/80 msR1访问tunnle
[r1]ping 10.1.1.5
PING 10.1.1.5: 56 data bytes, press CTRL_C to break
Reply from 10.1.1.5: bytes=56 Sequence=1 ttl=254 time=60 ms
Reply from 10.1.1.5: bytes=56 Sequence=2 ttl=254 time=50 ms
Reply from 10.1.1.5: bytes=56 Sequence=3 ttl=254 time=50 ms
Reply from 10.1.1.5: bytes=56 Sequence=4 ttl=254 time=60 ms
Reply from 10.1.1.5: bytes=56 Sequence=5 ttl=254 time=60 ms
--- 10.1.1.5 ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 50/56/60 msR1访问R10环回
[r3-ospf-1-area-0.0.0.1]ping 172.16.4.33
PING 172.16.4.33: 56 data bytes, press CTRL_C to break
Reply from 172.16.4.33: bytes=56 Sequence=1 ttl=252 time=40 ms
Reply from 172.16.4.33: bytes=56 Sequence=2 ttl=252 time=40 ms
Reply from 172.16.4.33: bytes=56 Sequence=3 ttl=252 time=40 ms
Reply from 172.16.4.33: bytes=56 Sequence=4 ttl=252 time=60 ms
Reply from 172.16.4.33: bytes=56 Sequence=5 ttl=252 time=40 ms
--- 172.16.4.33 ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 40/44/60 msR12环回访问ISP
[r12-ospf-1-area-0.0.0.2]PING -A 172.16.5.1 4.4.4.4
PING 4.4.4.4: 56 data bytes, press CTRL_C to break
Reply from 4.4.4.4: bytes=56 Sequence=1 ttl=253 time=40 ms
Reply from 4.4.4.4: bytes=56 Sequence=2 ttl=253 time=30 ms
Reply from 4.4.4.4: bytes=56 Sequence=3 ttl=253 time=40 ms
Reply from 4.4.4.4: bytes=56 Sequence=4 ttl=253 time=30 ms
Reply from 4.4.4.4: bytes=56 Sequence=5 ttl=253 time=20 ms
--- 4.4.4.4 ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 20/32/40 msR10环回访问ISP
[r10-ospf-2-area-0.0.0.4]ping -a 172.16.4.33 4.4.4.4
PING 4.4.4.4: 56 data bytes, press CTRL_C to break
Reply from 4.4.4.4: bytes=56 Sequence=1 ttl=252 time=30 ms
Reply from 4.4.4.4: bytes=56 Sequence=2 ttl=252 time=50 ms
Reply from 4.4.4.4: bytes=56 Sequence=3 ttl=252 time=40 ms
Reply from 4.4.4.4: bytes=56 Sequence=4 ttl=252 time=50 ms
Reply from 4.4.4.4: bytes=56 Sequence=5 ttl=252 time=40 ms
--- 4.4.4.4 ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 30/42/50 ms本文章为转载内容，我们尊重原作者对文章享有的著作权。如有内容错误或侵权问题，欢迎原作者联系我们进行内容更正或删除文章。
