实现“sgx disabled by bios”的步骤
为了实现"sgx disabled by bios",首先需要了解整个过程的流程。下面是实现该功能的步骤:
步骤 | 操作 |
---|---|
1 | 检查 SGX 支持 |
2 | 设置 MSR 控制位 |
3 | 准备测试程序 |
4 | 编译和运行测试程序 |
5 | 检查 SGX 状态 |
接下来,我将详细说明每个步骤需要做什么,并提供每一条代码及其注释。
1. 检查 SGX 支持
首先,我们需要检查系统是否支持 SGX。下面的代码片段将帮助我们检测 SGX 是否可用:
#include <stdio.h>
#include <cpuid.h>
int main() {
unsigned int eax, ebx, ecx, edx;
eax = 7;
ecx = 0;
__cpuid_count(eax, ecx, eax, ebx, ecx, edx);
if (ebx & bit_SGX) {
printf("SGX is supported.\n");
} else {
printf("SGX is not supported.\n");
}
return 0;
}
这段代码通过 cpuid
指令来查询 CPU 支持的功能。如果 ebx
寄存器的 bit 位上有 bit_SGX
(SGX 支持位),则说明系统支持 SGX。
2. 设置 MSR 控制位
接下来,我们需要设置 MSR(Model Specific Registers)控制位来启用或禁用 SGX。下面的代码展示了如何设置 MSR 控制位:
#include <stdio.h>
#include <stdint.h>
#include <fcntl.h>
#include <unistd.h>
#include <sys/ioctl.h>
#include <linux/msr.h>
int main() {
int fd;
uint64_t msr_value;
fd = open("/dev/cpu/0/msr", O_WRONLY);
if (fd < 0) {
printf("Failed to open MSR device.\n");
return -1;
}
msr_value = 0x0; // 禁用 SGX
if (pwrite(fd, &msr_value, sizeof(msr_value), 0x1a4) != sizeof(msr_value)) {
printf("Failed to write to MSR.\n");
close(fd);
return -1;
}
close(fd);
return 0;
}
这段代码使用 /dev/cpu/0/msr
设备文件来访问 CPU 的 MSR 寄存器。通过设置 MSR 的 0x1a4
位置上的值为 0x0
,可以禁用 SGX。
3. 准备测试程序
在禁用 SGX 后,我们需要准备一个测试程序来验证 SGX 状态。下面是一个简单的测试程序示例:
#include <stdio.h>
#include <stdlib.h>
#include <sgx_urts.h>
int main() {
sgx_status_t status;
sgx_enclave_id_t eid;
status = sgx_create_enclave("enclave.signed.so", 1, NULL, NULL, &eid, NULL);
if (status != SGX_SUCCESS) {
printf("Failed to create enclave.\n");
return -1;
}
// 执行需要 SGX 的操作...
sgx_destroy_enclave(eid);
return 0;
}
这段代码使用 Intel SGX SDK 中的 sgx_urts.h
头文件提供的函数来创建和销毁一个 SGX enclave 实例。测试程序会尝试创建一个 enclave,如果禁用了 SGX,那么创建 enclave 的过程应该会失败。
4. 编译和运行测试程序
在准备好测试程序后,我们需要编译并运行它。下面的命令演示了如何编译和运行测试程序:
gcc -o sgx_test sgx_test.c -lsgx_urts -L./sgxsdk/lib64
./sgx_test
以上命令会将源代码 sgx_test.c
编译为可执行文件,并链接 SGX 运行时库。最后一行命令将运行生成的可执行文件。
5. 检查 SGX 状态
运行测试程序后,我们需要检查 SGX 的状态。下面的代码展示了如何检查 SGX 状态:
#include <stdio.h>
#include <stdlib.h>
#include <sgx_urts.h>