【单片机】数码管应用

【单片机】数码管应用

一、操作目的

(1)简单的数码管应用。
(2)60进制操作练习。

二、代码详解（简单应用）

#include <reg51.h>
#include <absacc.h>
#define uchar unsigned char
#define com8255 XBYTE[0xff23]//宏定义口地址
#define pa8255 XBYTE[0xff20]
#define pb8255 XBYTE[0xff21]
//unsigned char code mon51[3] _at_ 0x3b;//保留0X3B开始三个程序空间作全速中断用
uchar code table[20] = {0xC0, 0xF9, 0xA4, 0xB0, 0x99, 0x92, 0x82, 0xF8, 0x80, 0x90, 0x88, 0x83, 0xC6, 0xA1, 0x86, 0x8E, 0xFF, 0x0C, 0x89, 0xDE};
uchar code wei[] = {0x20, 0x10, 0x08, 0x04, 0x02, 0x01};

void delay(unsigned int i)
{
   unsigned int j, k;
   for (k = 0; k < i; k++)
      for (j = 0; j < 100; j++)
         ;
}

void main(void)
{
   uchar m = 0;
   com8255 = 0x80; //控制口赋值
   pa8255 = 0x00;  //PA初始化
   pb8255 = 0x00;  //PB口初始化
   delay(2);

   while (1)
   {
      pb8255 = table[m];
      pa8255 = ~wei[m];
      delay(2);
      m++;
      if (m == 6)
      {
         m = 0;
      }
   }
}

三、代码详解（60进制）

#include <reg51.h>
#include <absacc.h>

#define uchar unsigned char
#define com8255 XBYTE[0xff23]//宏定义口地址
#define pa8255 XBYTE[0xff20]
#define pb8255 XBYTE[0xff21]
//unsigned char code mon51[3] _at_ 0x3b;//保留0X3B开始三个程序空间作全速中断用
uchar code table[20] = {0xC0, 0xF9, 0xA4, 0xB0, 0x99, 0x92, 0x82, 0xF8, 0x80, 0x90, 0x88, 0x83, 0xC6, 0xA1, 0x86, 0x8E, 0xFF, 0x0C, 0x89, 0xDE}; //0x0C   p.
uchar code wei[] = {0x20, 0x10, 0x08, 0x04, 0x02, 0x01};
uchar code myTable[10] = {0xC0, 0xF9, 0xA4, 0xB0, 0x99, 0x92, 0x82, 0xF8, 0x80, 0x90}; //0123456789

uchar code mywei[] = {0x02, 0x01};
void delay(unsigned int i)
{
  unsigned int j, k;
  for (k = 0; k < i; k++)
    for (j = 0; j < 100; j++)
      ;
}

void main(void)
{
  uchar m = 0;
  uchar midM = 0;
  com8255 = 0x80; //控制口赋值
  pa8255 = 0x00;  //PA初始化
  pb8255 = 0x00;  //PB口初始化
  delay(2);

  while (1)
  {
    unsigned int j = 0;
    while (j < 150)
    {
      pb8255 = myTable[m % 10];
      pa8255 = ~wei[5];
      delay(2);
      pb8255 = myTable[m / 10];
      pa8255 = ~wei[4];
      delay(2);
      j++;
    }
    m++;
    if (m == 60)
    {
      m = 0;
    }
  }
}