Reactor Cooling
time limit per test: 0.5 sec.
memory limit per test: 65536 KB
input: standard
output: standard
The terrorist group leaded by a well known international terrorist Ben Bladen is buliding a nuclear reactor to produce plutonium for the nuclear bomb they are planning to create. Being the wicked computer genius of this group, you are responsible for developing the cooling system for the reactor.
The cooling system of the reactor consists of the number of pipes that special cooling liquid flows by. Pipes are connected at special points, called nodes, each pipe has the starting node and the end point. The liquid must flow by the pipe from its start point to its end point and not in the opposite direction.
Let the nodes be numbered from 1 to N. The cooling system must be designed so that the liquid is circulating by the pipes and the amount of the liquid coming to each node (in the unit of time) is equal to the amount of liquid leaving the node. That is, if we designate the amount of liquid going by the pipe from i-th node to j-th as fij, (put fij = 0 if there is no pipe from node i to node j), for each i the following condition must hold:
sum(j=1..N, fij) = sum(j=1..N, fji)
Each pipe has some finite capacity, therefore for each i and j connected by the pipe must be fij ≤ cij where cij is the capacity of the pipe. To provide sufficient cooling, the amount of the liquid flowing by the pipe going from i-th to j-th nodes must be at least l ij, thus it must be fij ≥ lij.
Given cij and lij for all pipes, find the amount fij, satisfying the conditions specified above.
Input
The first line of the input file contains the number N (1 ≤ N ≤ 200) - the number of nodes and and M — the number of pipes. The following M lines contain four integer number each - i, j, lij and cij each. There is at most one pipe connecting any two nodes and 0 ≤ l ij ≤ cij ≤ 105 for all pipes. No pipe connects a node to itself. If there is a pipe from i-th node to j-th, there is no pipe from j-th node to i-th.
Output
On the first line of the output file print YES if there is the way to carry out reactor cooling and NO if there is none. In the first case M integers must follow, k-th number being the amount of liquid flowing by the k-th pipe. Pipes are numbered as they are given in the input file.
Sample test(s)
Input
Test #1 4 6 1 2 1 2 2 3 1 2 3 4 1 2 4 1 1 2 1 3 1 2 4 2 1 2 Test #2 4 6 1 2 1 3 2 3 1 3 3 4 1 3 4 1 1 3 1 3 1 3 4 2 1 3
Output
Test #1
NO
Test #2
YES
1
2
3
2
1
1
直接套路之
#include <cstdlib>
#include <cctype>
#include <cstring>
#include <cstdio>
#include <cmath>
#include <algorithm>
#include <vector>
#include <string>
#include <iostream>
#include <map>
#include <set>
#include <queue>
#include <stack>
#include <bitset>
using namespace std;
#define PB push_back
#define MP make_pair
#define REP(i,n) for(int i=0;i<(n);++i)
#define FOR(i,l,h) for(int i=(l);i<=(h);++i)
#define DWN(i,h,l) for(int i=(h);i>=(l);--i)
#define CLR(vis,pos) memset(vis,pos,sizeof(vis))
#define PI acos(-1.0)
#define INF 0x3f3f3f3f
#define LINF 1000000000000000000LL
#define eps 1e-8
typedef long long ll;
const int mm=1000005;
const int mn=22222;
int n,m;
int node,s,t,edge,max_flow;
int ver[mm],flow[mm],next[mm];
int head[mn],work[mn],dis[mn],q[mn];
int vis[mn];
inline void init(int _node,int _s,int _t)
{
node=_node, s=_s, t=_t;
for(int i=0;i<node;++i)
head[i]=-1;
edge=max_flow=0;
}
inline void addedge(int u,int v,int c)
{
ver[edge]=v,flow[edge]=c,next[edge]=head[u],head[u]=edge++;
ver[edge]=u,flow[edge]=0,next[edge]=head[v],head[v]=edge++;
}
bool Dinic_bfs()
{
int i,u,v,l,r=0;
for(i=0;i<node;++i) dis[i]=-1;
dis[ q[r++]=s ] = 0;
for(l=0;l<r;l++)
{
for(i=head[ u=q[l] ]; i>=0 ;i=next[i])
if(flow[i] && dis[ v=ver[i] ]<0)
{
dis[ q[r++]=v ]=dis[u]+1;
if(v==t) return 1;
}
}
return 0;
}
int Dinic_dfs(int u,int exp)
{
if(u==t) return exp;
for(int &i=work[u],v,temp; i>=0 ;i=next[i])
{
if(flow[i] && dis[ v=ver[i] ]==dis[u]+1 && ( temp=Dinic_dfs(v,min(exp,flow[i])) )>0)
{
flow[i]-=temp;
flow[i^1]+=temp;
return temp;
}
}
return 0;
}
int Dinic_flow()
{
int res,i;
while(Dinic_bfs())
{
for(i=0;i<node;++i) work[i]=head[i];
while( ( res=Dinic_dfs(s,INF) ) ) max_flow+=res;
}
return max_flow;
}
int w[mn],l[mn];
int main()
{
int n,m;
while(cin>>n>>m){
CLR(w,0);
init(n+2,0,n+1);
int u,v,c;
REP(i,m){
scanf("%d%d%d%d",&u,&v,&l[i],&c);
addedge(u,v,c-l[i]);
w[u]-=l[i];
w[v]+=l[i];
}
int sum=0;
FOR(i,1,n){
if(w[i]>0){
addedge(s,i,w[i]);
sum+=w[i];
}
if(w[i]<0)
addedge(i,t,-w[i]);
}
int ans=Dinic_flow();
if(ans!=sum)
printf("NO\n");
else{
printf("YES\n");
REP(i,m)
printf("%d\n",flow[2*i+1]+l[i]);
}
}
return 0;
}
