C:\Users\Administrator\Desktop>oflash.exe leds.bin

+---------------------------------------------------------+
|   Flash Programmer v1.5.4 for OpenJTAG of www.100ask.net  |
|   OpenJTAG is a USB to JTAG & RS232 tool based FT2232   |
|   This programmer supports both of S3C24X0 & S3C6410    |
|   Author: Email/MSN(thisway.diy@163.com), QQ(17653039)  |
+---------------------------------------------------------+
Usage:
1. oflash, run with cfg.txt or prompt
2. oflash [file], write [file] to flash with prompt
3. oflash [-f config_file]
4. oflash [jtag_type] [cpu_type] [flash_type] [read_or_write] [offset] [file]
Select the JTAG type:
0. OpenJTAG
1. Dongle JTAG(parallel port) //并口
2. Wiggler JTAG(parallel port) //并口
Enter the number: 0
Select the CPU:
0. S3C2410
1. S3C2440
2. S3C6410
Enter the number: 1

device: 4 "2232C"
deviceID: 0x14575118
SerialNumber: FTDAx43UA
Description: USB<=>JTAG&RS232 AS3C2440 detected, cpuID = 0x0032409d

[Main Menu]
 0:Nand Flash prog     1:Nor Flash prog   2:Memory Rd/Wr     3:Exit
Select the function to test:0

[NAND Flash JTAG Programmer]
nand_maf_id = 0xec, nand_dev_id = 0xda
Scan nand flash:
Device 0: NAND 256MiB 3,3V 8-bit, sector size 128 KiB
Total size: 256 MiB
 0:Nand Flash Program      1:Nand Flash Print BlkPage   2:Exit
Select the function to test :0

[NAND Flash Writing Program]

Source size: 0xa8

Available target block number: 0~2047
Input target block number:0
target start block number     =0
target size        (0x20000*1) =0x20000
STATUS:
Ep

C:\Users\Administrator\Desktop>oflash.exe 0 1 0 0 0 leds.bin //直接输入