Nginx高可用负载均衡集群实例架设 一、 Nginx高可用集群拓扑架构
node1：17216.100.67 node2：170.16.100.68 VIP：172.16.100.89 RS1：172.16.100.6 RS2：172.16.100.69
注意：nginx的高可用集群架构的所有RS的内核参数arp_ignore和arp_announce都为0。
二、 Nginx的高可用集群架设步骤 1、 在所有node节点（172.16.100.67，172.16.100.68）上安装nginx服务。 root@node1 ~] yum install nginx root@node2 ~] yum install nginx
2、 配置nginx成为反向代理，并且能够让用户的请求RS代理至node节点上。 在node节点上，编辑node节点的配置文件。 root@node1 ~] cd /etc/nginx root@node1 ~] vim nginx.conf 以下是新添加的upstream和location /代码。 upstream websrvs { server 172.16.100.6:80 weight=1; server 172.16.100.69:80 weight=1; }
server {
location / { Proxy_pass http://websrbs/; }
}
3、 编辑完nginx配置文件后，检查nginx配置文件有没有语法错误。 root@node1 ~] nginx -t
此时检查出nginx没有语法错误。 4、 启动node1上的nginx服务。 root@node1 ~] systemctl start nginx.service
5、 查看node1（172.16.100.6）上的nginx是否监听在80端口上。 root@node1 ~] netstat –tnlp
注意：启动nginx时，需要停掉httpd服务。同时防止httpd服务开启自启动。可以使用systemctl disabled httpd.service root@node1 ~] systemctl disabled httpd.service
6、 利用浏览器查看node1（172.16.100.67）看是否完成负载均衡。
此时刷新RS1和RS2就可以来回切换。
7、 配置node2节点的nginx配置文件。 重复上述1~6步骤。 配置文件可以直接从node1上复制到node2上。 root@node1 ~] scp nginx.conf node2:/etc/nginx/
8、 在node1节点上安装keepalived服务。 在node1（172.16.100.67）节点上修改keepalived.conf配置文件。 ! Configuration File for keepalived
global_defs {
notification_email {
linuxedu@foxmail.com
mageedu@126.com
}
notification_email_from kanotify@magedu.com
smtp_connect_timeout 3
smtp_server 127.0.0.1
router_id LVS_DEVEL
}
vrrp_script chk_nginx { #检查nginx服务是否在线 script “killall -0 nginx &> /dev/null” interval 1 wetght -20 }
vrrp_instance VI_1 {
interface eno16777736
state MASTER # BACKUP for slave routers
priority 100 # 99 for BACKUP
virtual_router_id 51
garp_master_delay 1
advert_int 1
authentication {
auth_type PASS
auth_pass 2231da37af98 #openssl rand –hex 6命令生成随机数
}
virtual_ipaddress {
172.16.100.89/16 dev eno16777736 label eno16777736:1
}
track_script {
chk_nginx
}
notify_master "/etc/keepalived/notify.sh master"
notify_backup "/etc/keepalived/notify.sh backup"
notify_fault "/etc/keepalived/notify.sh fault"
}
9、 在node2节点上安装keepalived服务。 在node2（172.16.100.68）节点上修改keepalived.conf配置文件。 ! Configuration File for keepalived
global_defs {
notification_email {
linuxedu@foxmail.com
mageedu@126.com
}
notification_email_from kanotify@magedu.com
smtp_connect_timeout 3
smtp_server 127.0.0.1
router_id LVS_DEVEL
}
vrrp_script chk_nginx { #检查nginx服务是否在线 script “killall -0 nginx &> /dev/null” interval 1 wetght -20 }
vrrp_instance VI_1 {
interface eno16777736
state MASTER # BACKUP for slave routers
priority 99 # 100 for MASTER
virtual_router_id 51
garp_master_delay 1
advert_int 1
authentication {
auth_type PASS
auth_pass 2231da37af98 #openssl rand –hex 6命令生成随机数
}
virtual_ipaddress {
172.16.100.89/16 dev eno16777736 label eno16777736:1
}
track_script {
chk_nginx
}
notify_master "/etc/keepalived/notify.sh master"
notify_backup "/etc/keepalived/notify.sh backup"
notify_fault "/etc/keepalived/notify.sh fault"
}
10、 编辑两个node节点的notify脚本。 #!/bin/bash
vip=172.16.100.179 contact='root@localhost'
notify() {
mailsubject="hostname to be $1: $vip floating"
mailbody="date '+%F %H:%M:%S': vrrp transition, hostname changed to be $1"
echo $mailbody | mail -s "$mailsubject" $contact
}
case "$1" in
master)
notify master
systemctl restart nginx.service
exit 0
;;
backup)
notify backup
systemctl restart nginx.service
exit 0
;;
fault)
notify fault
exit
;;
*)
echo 'Usage: basename $0 {master|backup|fault}'
exit 1
;;
esac
启动两个节点上的nginx服务。 root@node1 ~] systemctl start keepalived.service; ssh node2 ‘systemctl start keepalived.service’
11、 利用systemctl status keepalived.service查看keepalived是否正常。 root@node1 ~] systemctl status keepalived.service
12、 停掉一个node1（MASTER）的nginx服务查看高可用是否可行。 可以利用浏览器查看vip（172.16.100.179）看能否访问到RS1和RS2。
三、 Nginx的双主模型。 1、 拓扑图
node1（DIP）：17216.100.67 node2（DIP）：170.16.100.68 VIP1：172.16.100.179 VIP2：172.16.100.180 RS1：172.16.100.6 RS2：172.16.100.69
2、 步骤与二里面的步骤相同，不同的是keepalived.conf文件和notify.sh脚本。 在node1（172.16.100.67）节点上修改keepalived.conf配置文件。 ! Configuration File for keepalived
global_defs {
notification_email {
linuxedu@foxmail.com
mageedu@126.com
}
notification_email_from kanotify@magedu.com
smtp_connect_timeout 3
smtp_server 127.0.0.1
router_id LVS_DEVEL
}
vrrp_script chk_nginx { #检查nginx服务是否在线 script “killall -0 nginx &> /dev/null” interval 1 wetght -20 }
vrrp_instance VI_1 {
interface eno16777736
state MASTER # BACKUP for slave routers
priority 100 # 99 for BACKUP
virtual_router_id 51
garp_master_delay 1
advert_int 1
authentication {
auth_type PASS
auth_pass 2231da37af98 #openssl rand –hex 6命令生成随机数
}
virtual_ipaddress {
172.16.100.179/16 dev eno16777736 label eno16777736:1
}
track_script {
chk_nginx
}
vrrp_instance VI_2 {
interface eno16777736
state BACKUP
priority 99
virtual_router_id 61
garp_master_delay 1
advert_int 1
authentication {
auth_type PASS
auth_pass qaz1da37af98 #openssl rand –hex 6命令生成随机数
}
virtual_ipaddress {
172.16.100.180/16 dev eno16777736 label eno16777736:2
}
track_script {
chk_nginx
}
notify_master "/etc/keepalived/notify.sh master"
notify_backup "/etc/keepalived/notify.sh backup"
notify_fault "/etc/keepalived/notify.sh fault"
}
node1的notify脚本 #!/bin/bash
vip=172.16.100.88 contact='root@localhost'
notify() {
mailsubject="hostname to be $1: $vip floating"
mailbody="date '+%F %H:%M:%S': vrrp transition, hostname changed to be $1"
echo $mailbody | mail -s "$mailsubject" $contact
}
case "$1" in
master)
notify master
exit 0
;;
backup)
notify backup
exit 0
;;
fault)
notify fault
exit
;;
*)
echo 'Usage: basename $0 {master|backup|fault}'
exit 1
;;
esac
3、 在node2上修改keepalived.conf配置文件和notify.sh脚本。 在node2（172.16.100.68）节点上修改keepalived.conf配置文件。 ! Configuration File for keepalived
global_defs {
notification_email {
linuxedu@foxmail.com
mageedu@126.com
}
notification_email_from kanotify@magedu.com
smtp_connect_timeout 3
smtp_server 127.0.0.1
router_id LVS_DEVEL
}
vrrp_script chk_nginx { #检查nginx服务是否在线 script “killall -0 nginx &> /dev/null” interval 1 wetght -20 }
vrrp_instance VI_1 {
interface eno16777736
state BACKUP
priority 99
virtual_router_id 51
garp_master_delay 1
advert_int 1
authentication {
auth_type PASS
auth_pass 2231da37af98 #openssl rand –hex 6命令生成随机数
}
virtual_ipaddress {
172.16.100.179/16 dev eno16777736 label eno16777736:1
}
track_script {
chk_nginx
}
vrrp_instance VI_2 {
interface eno16777736
state MASTER
priority 100
virtual_router_id 61
garp_master_delay 1
advert_int 1
authentication {
auth_type PASS
auth_pass qaz1da37af98 #openssl rand –hex 6命令生成随机数
}
virtual_ipaddress {
172.16.100.180/16 dev eno16777736 label eno16777736:2
}
track_script {
chk_nginx
}
notify_master "/etc/keepalived/notify.sh master"
notify_backup "/etc/keepalived/notify.sh backup"
notify_fault "/etc/keepalived/notify.sh fault"
}
node1的notify脚本 #!/bin/bash
vip=172.16.100.88 contact='root@localhost'
notify() {
mailsubject="hostname to be $1: $vip floating"
mailbody="date '+%F %H:%M:%S': vrrp transition, hostname changed to be $1"
echo $mailbody | mail -s "$mailsubject" $contact
}
case "$1" in
master)
notify master
exit 0
;;
backup)
notify backup
exit 0
;;
fault)
notify fault
exit
;;
*)
echo 'Usage: basename $0 {master|backup|fault}'
exit 1
;;
esac
