DMVPN的第三阶段EIGRP

原创

qieziboy 2018-04-02 21:47:44 博主文章分类：路由交换 ©著作权

©著作权归作者所有：来自51CTO博客作者qieziboy的原创作品，请联系作者获取转载授权，否则将追究法律责任

R1#sho run int tun 0 Building configuration... Current configuration : 378 bytes interface Tunnel0 ip address 10.1.1.1 255.255.255.0 no ip redirects ip nhrp authentication 123 ip nhrp map multicast dynamic ip nhrp network-id 100 ip nhrp redirect ip summary-address eigrp 1 2.0.0.0 255.0.0.0 //EIGRP必须下发一条默认或汇总路由使spoke发出进入tunnel的触发流量，一般下发的是默认路由。 ip summary-address eigrp 1 3.0.0.0 255.0.0.0
tunnel source Ethernet0/0 tunnel mode gre multipoint tunnel key 100 End

R1#sho ip route Gateway of last resort is 100.1.18.8 to network 0.0.0.0 S* 0.0.0.0/0 [1/0] via 100.1.18.8 1.0.0.0/8 is variably subnetted, 2 subnets, 2 masks C 1.1.1.0/24 is directly connected, Loopback0 L 1.1.1.1/32 is directly connected, Loopback0 2.0.0.0/8 is variably subnetted, 2 subnets, 2 masks D 2.0.0.0/8 is a summary, 00:16:29, Null0 D 2.2.2.0/24 [90/27008000] via 10.1.1.2, 00:16:38, Tunnel0 3.0.0.0/8 is variably subnetted, 2 subnets, 2 masks D 3.0.0.0/8 is a summary, 00:16:38, Null0 D 3.3.3.0/24 [90/27008000] via 10.1.1.3, 00:22:29, Tunnel0 10.0.0.0/8 is variably subnetted, 2 subnets, 2 masks C 10.1.1.0/24 is directly connected, Tunnel0 L 10.1.1.1/32 is directly connected, Tunnel0 100.0.0.0/8 is variably subnetted, 2 subnets, 2 masks C 100.1.18.0/24 is directly connected, Ethernet0/0 L 100.1.18.1/32 is directly connected, Ethernet0/0

R2#sho run int tun 0 Building configuration... Current configuration : 344 bytes interface Tunnel0 ip address 10.1.1.2 255.255.255.0 no ip redirects ip nhrp authentication 123 ip nhrp map 10.1.1.1 100.1.18.1 ip nhrp map multicast 100.1.18.1 ip nhrp network-id 100 ip nhrp nhs 10.1.1.1 ip nhrp shortcut tunnel source Ethernet0/0 tunnel mode gre multipoint tunnel key 100 End

R2#sho ip route Gateway of last resort is 100.2.28.8 to network 0.0.0.0 S* 0.0.0.0/0 [1/0] via 100.2.28.8 1.0.0.0/24 is subnetted, 1 subnets D 1.1.1.0 [90/27008000] via 10.1.1.1, 00:23:59, Tunnel0 2.0.0.0/8 is variably subnetted, 3 subnets, 3 masks D 2.0.0.0/8 [90/28288000] via 10.1.1.1, 00:17:40, Tunnel0 C 2.2.2.0/24 is directly connected, Loopback0 L 2.2.2.2/32 is directly connected, Loopback0 3.0.0.0/8 is variably subnetted, 2 subnets, 2 masks D 3.0.0.0/8 [90/28288000] via 10.1.1.1, 00:17:49, Tunnel0 H 3.3.3.0/24 [250/1] via 10.1.1.3, 00:14:52, Tunnel0 //eigrp环境中，nhrp直接生成路由加载在路由表中 10.0.0.0/8 is variably subnetted, 2 subnets, 2 masks
C 10.1.1.0/24 is directly connected, Tunnel0 L 10.1.1.2/32 is directly connected, Tunnel0 100.0.0.0/8 is variably subnetted, 4 subnets, 2 masks C 100.2.28.0/24 is directly connected, Ethernet0/0 L 100.2.28.2/32 is directly connected, Ethernet0/0

R3#sho run int tun 0 Building configuration... Current configuration : 344 bytes interface Tunnel0 ip address 10.1.1.3 255.255.255.0 no ip redirects ip nhrp authentication 123 ip nhrp map 10.1.1.1 100.1.18.1 ip nhrp map multicast 100.1.18.1 ip nhrp network-id 100 ip nhrp nhs 10.1.1.1 ip nhrp shortcut tunnel source Ethernet0/0 tunnel mode gre multipoint tunnel key 100 End

R3#sho ip route Gateway of last resort is 100.3.38.8 to network 0.0.0.0 S* 0.0.0.0/0 [1/0] via 100.3.38.8 1.0.0.0/24 is subnetted, 1 subnets D 1.1.1.0 [90/27008000] via 10.1.1.1, 00:24:59, Tunnel0 2.0.0.0/8 is variably subnetted, 2 subnets, 2 masks D 2.0.0.0/8 [90/28288000] via 10.1.1.1, 00:18:59, Tunnel0 H 2.2.2.0/24 [250/1] via 10.1.1.2, 00:16:11, Tunnel0 3.0.0.0/8 is variably subnetted, 3 subnets, 3 masks D 3.0.0.0/8 [90/28288000] via 10.1.1.1, 00:19:08, Tunnel0 C 3.3.3.0/24 is directly connected, Loopback0 L 3.3.3.3/32 is directly connected, Loopback0 10.0.0.0/8 is variably subnetted, 2 subnets, 2 masks C 10.1.1.0/24 is directly connected, Tunnel0 L 10.1.1.3/32 is directly connected, Tunnel0 100.0.0.0/8 is variably subnetted, 4 subnets, 2 masks C 100.3.38.0/24 is directly connected, Ethernet0/0 L 100.3.38.3/32 is directly connected, Ethernet0/0

R3# traceroute 2.2.2.2 source 3.3.3.3 numeric Type escape sequence to abort. Tracing the route to 2.2.2.2 VRF info: (vrf in name/id, vrf out name/id) 1 10.1.1.2 2 msec * 1 msec

注意： 1、第三阶段的DM×××，在eigrp环境下，不能再用修改下一跳，以及水平分割，否则就成了第二阶段。 2、由于eigrp受到水平分割的限制，所以server需要在隧道口下放默认路由或汇总，一般下发默认，使spoke能有触发流量。 3、在server上下放默认或汇总，是为了让更精确的路由加载到路由表中。 4、由于R2、R3已经配置了静态默认，本实验使用的是下放汇总，但server要想下放默认，可以使用VRF.