Haproxy+keepalived实现sphinx高可用负载均衡
环境如下：
【node3】
haproxy：192.168.1.189
【node4】
haproxy：192.168.1.103
vip：192.168.1.222/192.168.1.223
# apt-get install ipvsadm
# apt-get install linux-headers-$(uname -r)
# ln -s /usr/src/linux-headers-2.6.32-33 /usr/src/linux
# wget http://www.keepalived.org/software/keepalived-1.2.2.tar.gz
# tar zxvf keepalived-1.2.2.tar.gz -C ../software/
# ./configure –prefix=/usr/local/keepalived-1.2.2
configure: error:!!! OpenSSL is not properly installed on your system. !!!!!! Can not include OpenSSL headers files.解决办法：
# apt-get install libssl-dev
configure: error: Popt libraries is required
解决办法：
# apt-get install libpopt-dev
configure: WARNING: keepalived will be built without libnl support.
解决办法：
# apt-get install libnl-dev
/usr/include/stdint.h:41: error: conflicting types for ‘int64_t’
/usr/src/linux/include/linux/types.h:125: error: previous declaration of ‘int64_t’ was here
/usr/include/stdint.h:56: error: conflicting types for ‘uint64_t’
解决办法：
# vim ./keepalived/libipvs-2.6/ip_vs.h
将#include <linux/types.h>移动到#include <sys/types.h>后面去。
# ./configure –prefix=/usr/local/keepalived-1.2.2
Keepalived configuration
————————
Keepalived version : 1.2.2
Compiler : gcc
Compiler flags : -g -O2
Extra Lib : -lpopt -lssl -lcrypto -lnl
Use IPVS Framework : Yes
IPVS sync daemon support : Yes
IPVS use libnl : Yes
Use VRRP Framework : Yes
Use Debug flags : No
# make
# make install
# vim /etc/sysctl.conf
net.ipv4.ip_nonlocal_bind=1
# sysctl -p
【node3】
global_defs {
router_id LVS_DEVEL
}
vrrp_script chk_haproxy {
script “/usr/local/scripts/chk_haproxy.sh”
interval 2
weight 2
}
vrrp_instance VI_1 {
state MASTER
interface eth0
virtual_router_id 76
priority 150
advert_int 1
authentication {
auth_type PASS
auth_pass 123456
}
track_script {
chk_haproxy
}
virtual_ipaddress {
192.168.1.222
}
}
vrrp_instance VI_2 {
state BACKUP
interface eth0
virtual_router_id 77
priority 100
advert_int 1
authentication {
auth_type PASS
auth_pass 123456
}
track_script {
chk_haproxy
}
virtual_ipaddress {
192.168.1.223
}
}
【node4】
global_defs {
router_id LVS_DEVEL
}
vrrp_script chk_haproxy {
script “/usr/local/scripts/chk_haproxy.sh”
interval 2
weight 2
}
vrrp_instance VI_1 {
state BACKUP
interface eth0
virtual_router_id 76
priority 100
advert_int 1
authentication {
auth_type PASS
auth_pass 123456
}
track_script {
chk_haproxy
}
virtual_ipaddress {
192.168.1.222
}
}
vrrp_instance VI_2 {
state MASTER
interface eth0
virtual_router_id 77
priority 150
advert_int 1
authentication {
auth_type PASS
auth_pass 123456
}
track_script {
chk_haproxy
}
virtual_ipaddress {
192.168.1.223
}
}
# vim chk_haproxy.sh
#!/bin/bash
STATUS=`netstat -nptl | grep haproxy | grep 3312 | wc -l`
if [ "$STATUS" -eq "0" ]; then
/usr/local/haproxy-1.4.18/sbin/haproxy -f /usr/local/haproxy-1.4.18/haproxy.conf
STATUS2=`netstat -nptl | grep haproxy | grep 3312 | wc -l`
if [ "$STATUS2" -eq "0" ]; then
kill -9 $(ps -ef | grep keepalived | grep -v grep | awk ‘{print $2}’)
fi
fi
环境如下：
【node3】
haproxy：192.168.1.189
【node4】
haproxy：192.168.1.103
vip：192.168.1.222/192.168.1.223
# apt-get install ipvsadm
# apt-get install linux-headers-$(uname -r)
# ln -s /usr/src/linux-headers-2.6.32-33 /usr/src/linux
# wget http://www.keepalived.org/software/keepalived-1.2.2.tar.gz
# tar zxvf keepalived-1.2.2.tar.gz -C ../software/
# ./configure –prefix=/usr/local/keepalived-1.2.2
configure: error:!!! OpenSSL is not properly installed on your system. !!!!!! Can not include OpenSSL headers files.解决办法：
# apt-get install libssl-dev
configure: error: Popt libraries is required
解决办法：
# apt-get install libpopt-dev
configure: WARNING: keepalived will be built without libnl support.
解决办法：
# apt-get install libnl-dev
/usr/include/stdint.h:41: error: conflicting types for ‘int64_t’
/usr/src/linux/include/linux/types.h:125: error: previous declaration of ‘int64_t’ was here
/usr/include/stdint.h:56: error: conflicting types for ‘uint64_t’
解决办法：
# vim ./keepalived/libipvs-2.6/ip_vs.h
将#include <linux/types.h>移动到#include <sys/types.h>后面去。
# ./configure –prefix=/usr/local/keepalived-1.2.2
Keepalived configuration
————————
Keepalived version : 1.2.2
Compiler : gcc
Compiler flags : -g -O2
Extra Lib : -lpopt -lssl -lcrypto -lnl
Use IPVS Framework : Yes
IPVS sync daemon support : Yes
IPVS use libnl : Yes
Use VRRP Framework : Yes
Use Debug flags : No
# make
# make install
# vim /etc/sysctl.conf
net.ipv4.ip_nonlocal_bind=1
# sysctl -p
【node3】
global_defs {
router_id LVS_DEVEL
}
vrrp_script chk_haproxy {
script “/usr/local/scripts/chk_haproxy.sh”
interval 2
weight 2
}
vrrp_instance VI_1 {
state MASTER
interface eth0
virtual_router_id 76
priority 150
advert_int 1
authentication {
auth_type PASS
auth_pass 123456
}
track_script {
chk_haproxy
}
virtual_ipaddress {
192.168.1.222
}
}
vrrp_instance VI_2 {
state BACKUP
interface eth0
virtual_router_id 77
priority 100
advert_int 1
authentication {
auth_type PASS
auth_pass 123456
}
track_script {
chk_haproxy
}
virtual_ipaddress {
192.168.1.223
}
}
【node4】
global_defs {
router_id LVS_DEVEL
}
vrrp_script chk_haproxy {
script “/usr/local/scripts/chk_haproxy.sh”
interval 2
weight 2
}
vrrp_instance VI_1 {
state BACKUP
interface eth0
virtual_router_id 76
priority 100
advert_int 1
authentication {
auth_type PASS
auth_pass 123456
}
track_script {
chk_haproxy
}
virtual_ipaddress {
192.168.1.222
}
}
vrrp_instance VI_2 {
state MASTER
interface eth0
virtual_router_id 77
priority 150
advert_int 1
authentication {
auth_type PASS
auth_pass 123456
}
track_script {
chk_haproxy
}
virtual_ipaddress {
192.168.1.223
}
}
# vim chk_haproxy.sh
#!/bin/bash
STATUS=`netstat -nptl | grep haproxy | grep 3312 | wc -l`
if [ "$STATUS" -eq "0" ]; then
/usr/local/haproxy-1.4.18/sbin/haproxy -f /usr/local/haproxy-1.4.18/haproxy.conf
STATUS2=`netstat -nptl | grep haproxy | grep 3312 | wc -l`
if [ "$STATUS2" -eq "0" ]; then
kill -9 $(ps -ef | grep keepalived | grep -v grep | awk ‘{print $2}’)
fi
fi
