早上刚刚参考下面的文档测试通过过几天步骤写出来下 现在时间紧 大家先参考下面的
 
CentOS 5 QmailToaster Install_QmailToaster
 
CentOS 5 QmailToaster Install_QmailToaster_02
 
 
CentOS 5 QmailToaster Install_QmailToaster_03
测试邮件发送成功内部
 
 
http://www.qmailtoaster.com/ 上下载脚本或者我这边提供了脚本附件
 
以下是脚本安装的步骤，按照下面一步步执行就OK
Very Quick Install
This is a temporary document . . .
Nick Hemmesch
April 15, 2007
CentOS 5 -
1. Server is the only configuration choice checked. No gnome or kde, no
other packages selected.
2. Disable selinux manually
3. Update with yum & reboot
4. Run cnt50-deps.sh
5. Run cnt50-perl.sh
6. Edit cnt50-svcs.sh mysql root password, edit firewall.sh IP Address,
run cnt50-svcs.sh & reboot again
7. Run cnt50-install.sh
8. Run cnt50-djbdns-localcache-install.sh, or setup bind
Configuration is pretty standard from there.
The default is to sign outgoing messages with DKSIGN and to filter
incoming domainkeys with spamassassin. Servers that forward, or are
clustered, will just have to disable signing completely until we find a
fix.
这份是超级详细的参考文档大家可以借鉴下
 
Downloading CentOS 5
This section will discuss the method of downloading and creating the CentOS installation media.
  • Download CentOS 5 CD iso's or the DVD iso. CentOS 5 iso downloads
  • Burn the CentOS iso you downloded with your favorite burning software usually using the "burn p_w_picpath to disk" option.

[edit] Installing CentOS 5

This section will discuss installing and configuring CentOS 5 getting it ready to take on the role of a mail server.

[edit] Booting to Installation Media

  • Boot the computer with your CD or DVD.
  • At the splash Page choose <enter> to install in graphical mode.
  • At the "CD Found" window Choose "Skip" to bypass the media test. (optional)
  • At the CentOS 5 screen Click "Next".

[edit] Setting Language Options

This section will walk you through the next 2 screens selecting the system and keyboard languages.
  • At the Language Selection screen Select your language & click "Next".
  • At the Keyboard selection screen select your language & click "Next".

[edit] Disk Partitioning

This screen deals with Disk Partitioning.
  • Leave the defaults and click "Next".
  • A warning window will pop up explaining that it will now delete all your partitions. click "Yes".

[edit] Network Configuration

This screen will setup your network configuration.
  • Follow the steps listed below.

[edit] Step 1 - Configure your Network Device

192.168.70.7/255.255.255.0 192.168.2.3/255.255.255.0
  1. Make sure your network card is slected and click "EDIT"
  2. Remove the check from "Use dynamic IP configuration (DHCP).
  3. Remove the check from "Enable IPv6 support" (optional).
  4. Enter your IP address.
  5. Enter your Prefix (Netmask).
  6. Click "OK".

[edit] Step 2 - Enter Your Host

  1. Deselect "automatically via DHCP"
  2. Select "manually" & enter your "fully qualified domain name"
mailsrv.cms.vn

[edit] Step 3 - Miscellaneous Settings

  1. Enter the IP address of your gateway
  2. Enter the IP address of your primary DNS server
  3. Enter the IP address of your secondary DNS server
  • Once you have finished the above steps click "Next".
192.168.2.1 192.168.70.7 203.162.0.11

[edit] Setting the Time Zone

This screen will set the time zone used by the system
  • You can either click directly on the map to select your region and then time zone or make your selection from the dropdown box.
  • If your system clock uses UTC time make sure the "System clock uses UTC" box is checked.
  • Click "Next".

[edit] Setting the Root Password

This screen will set password used by the systems root account.
IT IS VERY IMPORTANT YOU REMEMBER THIS PASSWORD
  • Type the password you would like to use for the root account into the "Root Password" field.
    Try to use a password with a combination of letters and numbers.
  • Confirm the root password by typing it in the "Confirm" field.
  • Click "Next".

[edit] Choose Install Type

This screen will allow you to choose how you want CentOS 5 installed. by default it installs with the Gnome desktop environment. we will be changing the default options to suit the needs of the mail server.
  • Remove the check from "Desktop - Gnome".
  • Check the "Server" option.
  • Choose "Customize Now" at the bottom of the screen.
    This will allow you to pick and choose software to be installed on the system.
  • Click "Next".

[edit] Choose Software Packages

This screen will allow you to choose which software packages you would like installed. The defaults will be kept with a few addition.
  • Follow the steps listed below. they are broken down by category.

[edit] Servers

  • Make sure "Server Configuration Tools" is selected. (should be selected by default)
  • Make sure "Web Server" is selected. (should be selected by default)
    with "Web Server" highlighted click the optional packages button and select "php-mysql" along with the defaults and click "Close".
  • Make sure "DNS Name Server" is selected. (should be selected by default)
  • Make sure "FTP Server" is selected. (should be selected by default)
  • Select "MySQL Database". (should 'NOT' be selected by default)
    with "MySQL Database" highlighted click the optional packages button and select "mysql-bench" and if "mysql-server" is not selected go ahead and select it along with the defaults and click "Close".

[edit] Development

  • Select "Development Tools". (should 'NOT' be selected by default)
    with "Development Tools" highlighted click the optional packages button and select "expect" along with the defaults and click "Close".

[edit] Base System

  • Select "Administration Tools". (should 'NOT' be selected by default)
  • Select "System Tools". (should 'NOT' be selected by default)
    with "System Tools" highlighted click the optional packages button and select "mrtg" along with the defaults and click "Close".
  • Once you have finished the above steps click "Next".

[edit] Begin Install

This screen gives you some last minute information before starting the CentOS 5 Install.
  • Just click "Next"

[edit] Reboot

This is the last step of the install. The screen explains that the install is complete and you should now reboot after removing any media used during the install of CentOS 5.
  • Remove the CentOS 5 install dvd or cd.
  • Click "Reboot"

[edit] Firewall Configuration

This is the first screen you should see upon reboot. It will give you the opportunity to change some system settings including the firewall settings which will be the focus of this section.
If this screen does not appear you can login as root and type setup from the command line to access this screen.
  • Highlight "Firewall Configuration".
  • Choose "Run Tool"
  • Change "Security Level" to "Disabled".
  • Change "SELinux" to "Disabled".
  • Choose "OK".
NOTE
if you decide to leave SELinux enabled you will need to run the command below 
setsebool -P httpd_can_network_connect=1

[edit] Preparing QmailToaster Install

This section of this tutorial will walk you through downloading and running the necessary scripts to prepare the server for the QmailToaster install.

[edit] Create Install Directory

  • Login as root.
  • Create the "qtms-install" directory by typing the following command. 
mkdir -p /usr/src/qtms-install

[edit] Download & Run Pre-Install Scripts

  • Change your directory to "/usr/src/qtms-install" created in the above step. 
cd /usr/src/qtms-install

[edit] cnt50-deps.sh and cnt5064-deps.sh

  • For i386: Download the "cnt50-deps.sh" script with the following command.
  • For x86_64: Download the "cnt5064-deps.sh" script with the following command.

  • For i386: Run "cnt50-deps.sh" with the following command.
sh cnt50-deps.sh
  • For x86_64: Run "cnt5064-deps.sh" with the following command.
sh cnt5064-deps.sh

[edit] cnt50-perl.sh and cnt5064-perl.sh

  • For i386: Download the "cnt50-perl.sh" script with the following command.
  • For x86_64: Download the "cnt5064-perl.sh" script with the following command.
  • For i386: Run "cnt50-perl.sh" with the following command.
sh cnt50-perl.sh
  • For x86_64: Run "cnt5064-perl.sh" with the following command.
sh cnt5064-perl.sh
The script will prompt to do a manual configuration, answer no. You will be prompted to answer yes or no a few more times during the execution of this script, just hit enter to give the default answer on these questions.

[edit] cnt50-svcs.sh & firewall.sh

  • Download the "cnt50-svcs.sh" script with the following command.
    Remember if you're installing CentOS 5 x86_64, replace cnt50 with cnt5064 
wget http://www.qmailtoaster.com/centos/cnt50/cnt50-svcs.sh
  • Edit "cnt50-svcs.sh" with "nano" or your favorite text editor. 
nano -w cnt50-svcs.sh
  • Find the line that with "MYSQLPW=YOUR_MYSQL_ROOT_PASSWORD" and change "YOUR_MYSQL_ROOT_PASSWORD" to the password you want used for the mysql root account.
  • Once you are done press "ctrl-O" and "Enter" to save the changes and "ctrl-X" to exit Nano.
  • Download the "firewall.sh" script with the following command.
    Remember if your installing CentOS 5 x86_64, replace cnt50 with cnt5064 
wget http://www.qmailtoaster.com/centos/cnt50/firewall.sh
  • Edit "firewall.sh" with "nano" or your favorite text editor. 
nano -w firewall.sh
  • Find the line that with "MYIP="YOUR_IP_ADDRESS"" and change "YOUR_IP_ADDRESS" to the IP address of the machine.
  • Once you are done press "ctrl-O" and "Enter" to save the changes and "ctrl-X" to exit Nano.
  • Run "cnt50-svcs.sh" with the following command. 
sh cnt50-svcs.sh
NOTE
This script turns on or off all necessary services. Then the script sets
up your mysql root account, creates and grants privileges for your vpopmail
mysql account, makes a symlink so your krb5 is read properly, edits your
php.ini, sets inittab to start at runlevel 3, and sets up your firewall calling firewall.sh.
Note: You might see some service errors while the script runs,
don't worry about them.
Note: You might lost conectivity if your network is 192.168.0.0/16,
edit /etc/sysconfig/iptables accordingly and restart service iptables.
NOTE - This part is added by a user 5/1/2009
I personally had to change one line in cnt50-svcs.sh
from
mysqladmin -uroot password $MYSQLPW
to
mysqladmin -uroot -p$MYSQLPW
otherwise, it complains 'Access denied for user 'root'@'localhost' (using password: NO)'

[edit] Update all packages on the machine

  • We now need to update all the packages on the system with the command below. 
yum -y update
  • Once completed reboot the machine by typing reboot at the command line. 
reboot.

[edit] Install QmailToaster

This section will Download all the QmailToaster packages and install them on your machine.

[edit] Download the QmailToaster Packages

  • Login as root now that you rebooted.
  • Change directories to the install directory "/usr/src/qtms-install/" with the command below 
cd /usr/src/qtms-install
  • Download the script "current-download-script.sh" that will download all the QmailToaster packages to be installed on your system. 
wget http://www.qmailtoaster.com/info/current-download-script.sh
  • Run the "current-download-script.sh" with the command below. 
sh current-download-script.sh
what about if i have problems in this step ??? I run the above script and then the problems show up like this : RPM build errors: 
   Bad exit status from /var/temp/rpm-tmp.84356 (%build)
error: File not found by glob: /usr/src/redhat/RPMS/x86_64/vpopmail-toaster*.rpm.
and for the next while installing qmail-toaster : error: Failed dependencies : 
      exim conflicts with qmail-toaster-1.03-1.3.16.x86_64
error: Failed dependencies : 
      qmail-toaster >= 1.03-1.3.16 is needed by qmail-pop3d-toaster-1.03-1.3.16.x86_64
Please help me.......
Please do remove exim before start installation, and it's dependencies if any exist. rpm -e --nodeps arpwatch rpm -e --nodeps sendmail rpm -e --nodeps exim
that's will doit
.. davidj_id

[edit] Install QmailToaster Packages

  • For i386: Download the "cnt50-install-script.sh" file which will install all the QmailToaster packages on your system.
  • For x86_64: Download the "cnt5064-install-script.sh" file which will install all the QmailToaster packages on your system.
  • For i386: Run the "cnt50-install-script.sh" with the command below.
sh cnt50-install-script.sh
  • For x86_64: Run the "cnt5064-install-script.sh" with the command below.
sh cnt5064-install-script.sh
You will be asked to confirm the installation of each package. Press "Enter" to confirm the default answer of "Yes" for every package.
NOTE - this part is added by a user 5/2/2009 My email didn't work when the install finished. I opened up the install script and found out there were a dozen or so sections. You can cut-paste a section and run independently. For example, I found imap was not working, so I just ran the following segment manually DISTRO=cnt50 ARCH=i386 BDIR=redhat IMAP=courier-imap-toaster-*.src.rpm rpmbuild --rebuild --with $DISTRO $IMAP rpm -Uvh /usr/src/$BDIR/RPMS/$ARCH/courier-imap-toaster*.rpm I saw it was failing because cyrus-imap package conflicit. I did "yum -y remove cyrus-imapd-2.3.7-2.el5.i386", then ran the script segment again, and it took care of the imap problem
NOTE - for (maybe not only) Fedora 7 users (by chhh on 2009.11.04)
i was installing qmail-toaster on fedora 7, the only option apart from centOs 5 provided for vps by my hosting. It had lots of mail-connected programs installed, all of which were handled nicely by the scripts from this manual with one notable exception: postfix.
in my case it has created a usergroup with group id (GID) 89, which is used by vpopmail-toaster (at least by default).

if during installation when you run "sh cnt50-install-script.sh" you get errors while installing vpopmail-toaster-5.4.13-1.3.1 (something like 'cant run even the simplest ANSI C program.... create usergroup, create user...'), then:
  • check if postfix is installed with "rpm -q postfix"
    • if it is
      • then try "rpm -e --nodeps postfix" to delete it
      • delete string "postfix:x:89:" from /etc/group, this deletes the usergroup with GID that toaster needs
      • then add the required usergroup "groupadd --gid 89 vchkpw"
      • then add the required user "adduser --gid 89 vpopmail"
      • now try "sh cnt50-install-script.sh" one more time (you may skip ('s') building the modules that have already been installed by your previous attempts)

[edit] Check System Services

This section will make sure that all the proper services will be running when the machine is started.
  • Run the "setup" command at the command line. 
setup
  • Select "System Services" and choose "Run Tool".
  • Verify that the following services are selected.
acpid
anacron
atd
autofs
cpuspeed
crond
freshclam
haldaemon
httpd
iptables
kudzu
messagebus
mysqld
network
ntpd
qmail
smartd
sshd
syslog
xinet
Also irqbalance (w/ dual processors) xfs (w/ x windows)

[edit] Install djbdns (if you don't want bind)

In this section we will remove bind and install djbdns.
  • Remove bind with the following command. 
rpm -e --nodeps bind bind-chroot
  • Build the djbdns rpm for i386 with the following command. 
rpmbuild --rebuild --with cnt50 djbdns*.src.rpm
  • Build the djbdns rpm for x86_64 with the following command. 
rpmbuild --rebuild --with cnt5064 djbdns*.src.rpm
  • Install djbdns for i386 with the following command. 
rpm -Uvh ../redhat/RPMS/i386/djbdns-localcache*.rpm
  • Install djbdns for x86_64 with the following command. 
rpm -Uvh ../redhat/RPMS/x86_64/djbdns-localcache*.rpm
  • Add "search your-domain.com" to the "/etc/resolv.conf" replaceing "your-domain.com" with your actual domain by running the following command. 
echo "search your-domain.com" > /etc/resolv.conf
  • Add "nameserver 127.0.0.1" to your "/etc/resolv.conf" file with the following command. 
echo "nameserver 127.0.0.1" >> /etc/resolv.conf
  • Reboot the machine with the reboot command. 
reboot

[edit] QmailToaster Configuration

In this section you will configure QmailToaster. This section covers adding domain names and how to access the mail server administration.

[edit] Check QmailToaster Status

  • First check the status of the mail server with the command belowq 
qmailctl stat
  • The output should look somewhat like this. 
root@gateway ~]# qmailctl stat
authlib: up (pid 2425) 65 seconds
clamd: up (pid 2425) 65 seconds
imap4: up (pid 2421) 65 seconds
imap4-ssl: up (pid 2423) 65 seconds
pop3: up (pid 2414) 65 seconds
pop3-ssl: up (pid 2409) 65 seconds
send: up (pid 2416) 65 seconds
smtp: up (pid 2418) 65 seconds
spamd: up (pid 2407) 65 seconds
authlib/log: up (pid 2417) 65 seconds
clamd/log: up (pid 2417) 65 seconds
imap4/log: up (pid 2422) 65 seconds
imap4-ssl/log: up (pid 2424) 65 seconds
pop3/log: up (pid 2415) 65 seconds
pop3-ssl/log: up (pid 2413) 65 seconds
send/log: up (pid 2420) 65 seconds
smtp/log: up (pid 2419) 65 seconds
spamd/log: up (pid 2408) 65 seconds

[edit] Add a domain

add a domain: 
    /home/vpopmail/bin/vadddomain your-domain.com <postmaster-password>


Add a user:
    /home/vpopmail/bin/vadduser you@your-domain.com <your-password>


Edit /etc/php.ini and set register_globals = On
    service httpd restart  
Bring up your browser and go to:
    http://www.your-domain.com/admin-toaster/
      Username: admin
      Password: toaster
    Change your password . . . 


Edit /etc/php.ini and set register_globals = Off
    service httpd restart  
Check your mail server:
    http://www.your-domain.com/webmail
    login with your full email address and your password
    Send yourself an email - should show right away
    Send an email to yourself if you have another address
    Go to your other email account and reply to the message you sent


If Isoqlog doesn't show right away, do this:
    
    sh /usr/share/toaster/isoqlog/bin/cron.sh


10. Add domainkeys:

Note: I found the links sent to me by Eric Shupes on the toaster list VERY helpful. http://wiki.qmailtoaster.com/index.php/Domainkeys#bind_2 http://wiki.qmailtoaster.com/index.php/Domainkeys#Policy_Record http://wiki.qmailtoaster.com/index.php/Domainkeys#Selector_Record I suggest going there as the links contain a more in depth set of details. Below is borrowed from those links.

Create the directory for your domain's private key: 
   cd /var/qmail/control/domainkeys  
   mkdir your-domain.com
Create your domain's key pair (a private key and a corresponding public key) with the dknewkey command: 
   cd your-domain.com
   dknewkey private > public.txt

You want to be sure that the private key is kept private, so to change its ownership and permissions accordingly: 
   chmod 440 private
   cd ..
   chown -R root:vchkpw yourdomain.com


Make dns entry: 
    BIND - in the your-domain.com zone file (see public.txt for the private._domainkey.your-domain.com entry):


   _domainkey.your-domain.com.         IN TXT "t=y; o=-"
Note: This is putting it into test mode. If you are done testing, and want to take it out of testing mode, change the above to reflect below. 
   _domainkey.your-domain.com.         IN TXT "o=-"
Then also add this to your zone file: 
    private._domainkey.your-domain.com. IN TXT "k=rsa; p=MEwwDQY . . . to end of key" 
          (NOTE QUOTATION MARKS MUST BE THERE)
Note: I have not tested DJBDNS as I do not run it - DK 
    DJBDNS - in /var/djbdns/tinydns/root/data (make from public.txt): 
      '_domainkey.your-domain.com:o=-; r=postmaster@your-domain.com 
      'private._domainkey.your-domain.com:k=rsa; p=MEwwDQY . . . to end of key 


Test your mailserver:
    http://domainkeys.sourceforge.net/policycheck.html
    http://domainkeys.sourceforge.net/selectorcheck.html
   
    In squirrelmail, send a test email, select View Full Header and you
    should find something like the following:
    ----------- snip ------------
    DomainKey-Status: good 
    Received: by simscan 1.2.0 ppid: 22641, pid: 22644, t: 0.8416s
         scanners: clamav: 0.88.2/m:38/d:1476 spam: 3.1.1
    X-Spam-Checker-Version: SpamAssassin 3.1.1 (2006-03-10) on ndh1.whatgives.org
    X-Spam-Level: *
    X-Spam-Status: No, score=1.6 required=5.0 tests=FROM_DOMAIN_NOVOWEL 
         autolearn=no version=3.1.1
    Received: from unknown (HELO ns1.ndhsdns.com) (216.221.100.227)
         by ndh1.whatgives.org with (DHE-RSA-AES256-SHA encrypted) SMTP; 22 May 2006 20:03:36 -0000
    Received-SPF: pass (ndh1.whatgives.org: SPF record at ndhsdns.com designates 216.221.100.227 as permitted sender)
    Received: (qmail 28034 invoked by uid 89); 22 May 2006 20:03:36 -0000
    Comment: DomainKeys? See http://antispam.yahoo.com/domainkeys
    DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws;
         s=private; d=ndhsdns.com;
         b=XVKQZe446BXMnSoQKvgchf0DRx4v8YQYZn5KVLj5O8XYf7V1dX7ETaJ1VGWGp5Bf ;
    Received: from unknown (HELO www.ndhsdns.com) (127.0.0.1)
         by ns1.ndhsdns.com with SMTP; 22 May 2006 20:03:36 -0000
    ----------- snip ------------


11. Logs for all packages except freshclam are at: 

/var/log/qmail/*
Freshclam is at /var/log/clamav
This page has been accessed 44,747 times. This page was last modified 21:58, 3 November 2009. Content is available under GNU Free Documentation License 1.2.