CCNA实验：创建VLAN

原创

starshomes 2020-09-24 14:26:19 ©著作权

©著作权归作者所有：来自51CTO博客作者starshomes的原创作品，请联系作者获取转载授权，否则将追究法律责任

实验过程：第一步：登录sw1 S1#show vlan-s

VLAN Name Status Ports

1 default active Fa0/0, Fa0/1, Fa0/2, Fa0/3 Fa0/4, Fa0/5, Fa0/6, Fa0/7 Fa0/8, Fa0/9, Fa0/10, Fa0/11 Fa0/12, Fa0/13, Fa0/14, Fa0/15 1002 fddi-default active
1003 token-ring-default active
1004 fddinet-default active
1005 trnet-default active

VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1 Trans2

1 enet 100001 1500 - - - - - 1002 1003 1002 fddi 101002 1500 - - - - - 1 1003 1003 tr 101003 1500 1005 0 - - srb 1 1002 1004 fdnet 101004 1500 - - 1 ibm - 0 0
1005 trnet 101005 1500 - - 1 ibm - 0 0
S1# 第二步：进入vlan database模式下 S1#vlan da S1#vlan database （进入数据库模式下进行） S1(vlan)#vlan 2 name VLAN2 VLAN 2 added: Name: VLAN2 S1(vlan)#vlan 3 name vlan3 VLAN 3 added: Name: vlan3 S1(vlan)#vlan 4 name vlan4 VLAN 4 added: Name: vlan4 S1(vlan)#exit APPLY completed. Exiting.... S1#

第三步：再次查看创建vlan的结果： S1#show vlan-switch

VLAN Name Status Ports

1 default active Fa0/0, Fa0/1, Fa0/2, Fa0/3 Fa0/4, Fa0/5, Fa0/6, Fa0/7 Fa0/8, Fa0/9, Fa0/10, Fa0/11 Fa0/12, Fa0/13, Fa0/14, Fa0/15 2 VLAN2 active
3 vlan3 active
4 vlan4 active
1002 fddi-default active
1003 token-ring-default active
1004 fddinet-default active
1005 trnet-default active

VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1 Trans2

1 enet 100001 1500 - - - - - 1002 1003 2 enet 100002 1500 - - - - - 0 0
3 enet 100003 1500 - - - - - 0 0
4 enet 100004 1500 - - - - - 0 0
1002 fddi 101002 1500 - - - - - 1 1003 1003 tr 101003 1500 1005 0 - - srb 1 1002

VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1 Trans2

1004 fdnet 101004 1500 - - 1 ibm - 0 0
1005 trnet 101005 1500 - - 1 ibm - 0 0
S1# 第四步：查看vlan配置文件 S1#dir flash: （vlan的信息在2900系列上是保存在flash下的vlan.dat文件中的） Directory of flash:/

1  -rw-         780                    <no date>  vlan.dat

8388604 bytes total (8387760 bytes free) S1# 第五步：将F0/2划入到vlan中 S1(config)#int f0/2 S1(config-if)#switchport mode access S1(config-if)#switchport access vlan 2 S1(config-if)# S1(config-if)# 第六步：验证是否将接口划分到vlan中 S1#show vlan-s

VLAN Name Status Ports

1 default active Fa0/0, Fa0/1, Fa0/3, Fa0/4 Fa0/5, Fa0/6, Fa0/7, Fa0/8 Fa0/9, Fa0/10, Fa0/11, Fa0/12 Fa0/13, Fa0/14, Fa0/15 2 VLAN2 active Fa0/2 （看到这里已经好了） 3 vlan3 active
4 vlan4 active
1002 fddi-default active
1003 token-ring-default active
1004 fddinet-default active
1005 trnet-default active

VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1 Trans2

1004 fdnet 101004 1500 - - 1 ibm - 0 0
1005 trnet 101005 1500 - - 1 ibm - 0 0
S1#

清除交换机上划分的大量的vlan信息 1.vlan data下no vlan {vlan-id} 2.del vlan.dat