51CTO博客开发
Topology: CE: R1, R2, R7, R8 PE: R3, R5, R6 P: R4 R1 connected to R3 and R6 R2 connected to R3 and R5 R7 connected to R5 and R6 R8 connected to R6 and R3 There are 4 links between R1&a
This article is for recording all tips I learnt during CCIE RS practice. Will update any new tips if found. 1. The format of OSPF RT(route type) in MPLS VPN: R6-VPN1-3-4-PE#show ip bgp vpn r
摘抄自cisco.com相关manual。 Introduction There is sometimes confusion between the two Border Gateway Protocol (BGP) configuration commands bgp deterministic-med and bgp always-compare
Copyright © 2005-2024 51CTO.COM 版权所有 京ICP证060544号
