R-Studio的自定义校验设置
Creation of an Advanced Virtual RAID 5
Now we will use the drive p_w_picpaths as the objects from which we will create the RAID5
Parameters
1. Number of disks: three
2. Objects in R-Studio: disk p_w_picpath files: Y:\Disk1.dsk, Y:\Disk2.dsk, Y:\Disk3.dsk
3 Block Size: 4 KB
4. Offset: 64 KB
5. Block order: Custom
PD
1
2
PD
3
4
PD
5
6
7
PD
8
9
PD
10
11
PD
12
13
14
PD
15
16
PD
17
18
DP
To create such a RAID, we
1.Click the Create virtual volume sets or RAIDs button and select Create Virtual Block RAID. The newly created Virtual Block RAID object will appear on the Drives pane, and the Parents tab will appear on the R-Studio Main panel.R-Studio的自定义校验设置_休闲

Check that Apply changes immediately is cleared, as we will be doing a lot of editing here and there is no reason to have R-Studio execute changes unless we are through.
2. Drag the objects from which we want to create the RAID 5 to the Parents tab.

Then place them in the correct order, that is, Y:\Disk1.dsk, Y:\Disk2.dsk, Y:\Disk3.dsk.
Select RAID5 in the RAID type, and enter the block size and offset on the Parents tab. Disregard the Block order field for the time being.R-Studio的自定义校验设置_RAID_02
3.Manually enter 9 to the Number or rows field on the Parents tab. The Block order field will change to Custom.

Enter the block order in the table on the Parents tab.
Using the keyboard: Arrow keys to navigate, digit and P keys to enter the block order.
Using the mouse: Right-click the cell and select the number or parity from the shortcut menu. If the block table is too large, you better use the keyboard to enter the digits.
Corrections: R-Studio will indicate if some digits are not correct by marking the cell with the red color Navigate to the required cell and enter the correct value. Use the Delete key to clear a cell.
Clear the table: Right-click the table and select Clear all on the shortcut menu.R-Studio的自定义校验设置_休闲_03
4. When we finish filling the block order table, click the Apply button on the Parents tab. R-Studio的自定义校验设置_RAID_04