带有EMI的Catalyst3550交换机支持三种路由或桥接的三层接口:
要删除一个SVI,用命令:
你可以配置的被路由和SVI接口在软件上是没有限制的;
然而,因为硬件的限制,这个数目和被配置的其他接口特征数目之间的相互关系会影响CPU的利用。
需要更多的关于特征集的信息请看“为用户选择特性优化系统资源”部分。
输入一条no switchport命令会禁用并且重新启用该接口,该设备可能会产生消息给直连接口。
另外,当你使用这条命令把接口放入三层模式,你正在删除该端口的所有第二层特性。
|
Command
|
Purpose
|
Step 1
|
configure terminal
|
进入全局配置模式
|
Step 2
|
interface {{fastethernet | gigabitethernet} interface-id} | {vlan vlan-id} | {port-channel port-channel-number}
|
进入接口配置模式,而且要进入一个将作为一个三层接口被配置的接口
|
Step 3
|
no switchport
|
使物理接口进入三层模式
|
Step 4
|
ip address ip_address subnet_mask
|
配置IP地址和子网掩码
|
Step 5
|
no shutdown
|
|
Step 6
|
end
|
返回特权模式
|
Step 7
|
show interfaces [interface-id]
show ip interface [interface-id]
show running-config interface [interface-id]
|
确认配置
|
Step 8
|
copy running-config startup-config
|
(可选) 把你的条目保存到配置文件
|