1,linux开发环境搭建
2,汇编版程序测试
3, C语言版程序
4 C语言LED轮流亮
5 C语言按键控制LED
下载:easyOpentag驱动安装,打开连接,选择ARM-linux
下载:arm-linux-gcc-3.4.5-glibc-2.3.6.tar.bz2
打开连接,选择ARM-linux
链接:http://pan.baidu.com/s/1pJKK4w7 密码:a0re
我的开发板是JZ2440 4.3寸屏款,
把led_on.bin程序传到Windows平台,
FTD2XX.dll
oflash.exe
led_on.bin 烧录好的程序
放在一起就可以,我放在 D:\ARM 嵌入式Linux\my>
烧录技巧
D:\ARM 嵌入式Linux\my>oflash.exe 0 1 0 0 0 led_on_c.bin
1,环境搭建
我的系统版本 root@ubuntu:~# lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 14.04.3 LTS Release: 14.04 Codename: trusty root@ubuntu:~# 安装 arm-linux-gcc 解压 arm-linux-gcc-3.4.5-glibc-2.3.6.tar.bz2 来自韦东山教学光盘 tar xf arm-linux-gcc-3.4.5-glibc-2.3.6.tar.bz2 环境变量 root@ubuntu:~# export PATH=$PATH:/home/chunli/gcc-3.4.5-glibc-2.3.6/bin/ 一劳永逸: root@ubuntu:~# vim /etc/profile export PATH=$PATH:/home/chunli/gcc-3.4.5-glibc-2.3.6/bin/ 安装 sudo apt-get install lsb-core 否则可能出现No such file or directory root@ubuntu:~/leds# arm-linux-objcopy bash: /home/chunli/gcc-3.4.5-glibc-2.3.6/bin/arm-linux-objcopy: No such file or directory 看看我的系统 编译环境搭建好了 chunli@ubuntu:~$ arm-linux-gcc -v Reading specs from /home/chunli/gcc-3.4.5-glibc-2.3.6/bin/../lib/gcc/arm-linux/3.4.5/specs Configured with: /work/tools/create_crosstools/crosstool-0.43/build/arm-linux/gcc-3.4.5-glibc-2.3.6/gcc-3.4.5/configure --target=arm-linux --host=i686-host_pc-linux-gnu --prefix=/work/tools/gcc-3.4.5-glibc-2.3.6 --with-float=soft --with-headers=/work/tools/gcc-3.4.5-glibc-2.3.6/arm-linux/include --with-local-prefix=/work/tools/gcc-3.4.5-glibc-2.3.6/arm-linux --disable-nls --enable-threads=posix --enable-symvers=gnu --enable-__cxa_atexit --enable-languages=c,c++ --enable-shared --enable-c99 --enable-long-long Thread model: posix gcc version 3.4.5 chunli@ubuntu:~$
编写一个点亮LED的程序:
写一个点亮JZ2440开发板的一个汇编小程序
JZ2440开发板:
从JZ2440v2_sch.pdf中可以看出
nLED_2 上拉到3.3V
nLED_2 另一脚是接在GPF5 这个IO功能引脚上
查S3C2440官方手册
GPFCON 的地址是 0x56000050 ,此寄存器的值设为 0x00000400 配置GPF5这个引脚为输出
GPFDAT 的地址是 0x56000054 控制GPF5输出低电平
chunli@ubuntu:~/hardware$ mkdir my chunli@ubuntu:~/hardware$ cd my/ chunli@ubuntu:~/hardware/my$ vim led_on.S chunli@ubuntu:~/mytest$ cat led_on.S @****************************************************************************** @ File:led_on.S @ 功能:LED点灯程序,点亮LED1 @****************************************************************************** .text .global _start _start: LDR R0,=0x56000050 @ R0设为GPFCON寄存器。此寄存器用于选择各引脚的功能:是输出、是输入、还是其他 MOV R1,#0x00001500 @ 设置 GPF4,GPF5,GPF6为输出引脚,每两位确定一种功能 STR R1,[R0] @ 把0x00001500装入地址为0x56000050的寄存器中 LDR R0,=0x56000054 @ R0设为GPFDAT寄存器。此寄存器用于读/写引脚的数据 MOV R1,#0x0000005F @ 此值改为0x0000002F, 可让LED4 LED6 发光,0x5F就只亮LED5 STR R1,[R0] @ 把0x0000002F装入地址为0x56000054的寄存器中 MAIN_LOOP: B MAIN_LOOP 编写Makefile文件 chunli@ubuntu:~/hardware/my$ vim Makefile led_on.bin : led_on.S arm-linux-gcc -g -c -o led_on.o led_on.S arm-linux-ld -Ttext 0x0000000 -g led_on.o -o led_on_elf arm-linux-objcopy -O binary -S led_on_elf led_on.bin clean: rm -f led_on.bin led_on_elf *.o 注意:从本文网页复制过去的Makefile代码不能正常执行,需要将每条编译命令前面改成tab制表符其中一段代码arm-linux-ld -Ttext 0x0000000 意思是代码段的地址是0000000 编译 chunli@ubuntu:~/hardware/my$ make arm-linux-gcc -g -c -o led_on.o led_on.S arm-linux-ld -Ttext 0x0000000 -g led_on.o -o led_on_elf arm-linux-objcopy -O binary -S led_on_elf led_on.bin 没有报错 chunli@ubuntu:~/hardware/my$ echo $? 0 chunli@ubuntu:~/hardware/my$ ll -rwxrwxr-x 1 chunli chunli 36 Apr 12 22:20 led_on.bin* -rwxrwxr-x 1 chunli chunli 34144 Apr 12 22:20 led_on_elf* -rw-rw-r-- 1 chunli chunli 1412 Apr 12 22:20 led_on.o -rw-rw-r-- 1 chunli chunli 1035 Apr 12 22:19 led_on.S -rw-rw-r-- 1 chunli chunli 218 Apr 12 22:20 Makefile
把led_on.bin程序传到Windows平台,
FTD2XX.dll
oflash.exe
led_on.bin
放在一起就可以
运行oflash.exe小程序, D:\ARM 嵌入式Linux\my>oflash.exe +---------------------------------------------------------+ | Flash Programmer v1.3 for OpenJTAG of www.100ask.net | | OpenJTAG is a USB to JTAG & RS232 tool based FT2232 | | This programmer supports both of S3C24X0 & S3C6410 | | Author: Email/MSN(thisway.diy@163.com), QQ(17653039) | +---------------------------------------------------------+ Usage: 1. oflash, run with cfg.txt or prompt 2. oflash [file], write [file] to flash with prompt 3. oflash [-f config_file] 4. oflash [jtag_type] [cpu_type] [flash_type] [read_or_write] [offset] [file] Can't open cfg.txt, you should follow the prompt Select the JTAG type: 0. OpenJTAG 1. Dongle JTAG(parallel port) 2. Wiggler JTAG(parallel port) Enter the number: 0 Select the CPU: 0. S3C2410 1. S3C2440 2. S3C6410 Enter the number: 1 device: 4 "2232C" deviceID: 0x14575118 SerialNumber: FTSht3gzA Description: USB<=>JTAG&RS232 AS3C2440 detected, cpuID = 0x0032409d [Main Menu] 0:Nand Flash prog 1:Nor Flash prog 2:Memory Rd/Wr 3:Exit Select the function to test:0 Enter the file name: led_on.bin [NAND Flash JTAG Programmer] Scan nand flash: Device 0: NAND 256MiB 3,3V 8-bit, sector size 128 KiB Total size: 256 MiB 0:Nand Flash Program 1:Nand Flash Print BlkPage 2:Exit Select the function to test :0 [NAND Flash Writing Program] Source size: 0x24 Available target block number: 0~2047 Input target block number:0 target start block number =0 target size (0x20000*1) =0x20000 STATUS: Ep D:\ARM 嵌入式Linux\my> 等5秒,开发板的小灯亮起
3 C语言版:点亮LED
int a; int * p; p = &a; * p = 0x100; * p = (int *) 0x56000050; *((int *) 0x56000050) = 0x100; *(( volatile int *) 0x56000050) = 0x100; 相当于把 * p = 0x100 转换为 *(( volatile int *) 0x56000050) = 0x100; // 往 0x56000050寄存器地址写入0x100 #defin GPFCON (*(volatile unsigned long *) 0x56000050) 然后 GPFCON = 0x100; D:\ARM 嵌入式Linux\my>oflash.exe 0 1 0 0 0 led_on.bin 源代码 chunli@ubuntu:~/my02$ ll total 12 -rw-rw-r-- 1 chunli chunli 817 Apr 13 01:02 crt0.S -rw-rw-r-- 1 chunli chunli 279 Apr 13 01:29 led_on_c.c -rw-rw-r-- 1 chunli chunli 361 Apr 13 01:03 Makefile chunli@ubuntu:~/my02$ cat crt0.S @****************************************************************************** @ File:crt0.S @ 功能:通过它转入C程序 @****************************************************************************** .text .global _start _start: ldr r0, =0x56000010 @ WATCHDOG寄存器地址 mov r1, #0x0 str r1, [r0] @ 写入0,禁止WATCHDOG,否则CPU会不断重启 ldr sp, =1024*4 @ 设置堆栈,注意:不能大于4k, 因为现在可用的内存只有4K @ nand flash中的代码在复位后会移到内部ram中,此ram只有4K bl main @ 调用C程序中的main函数 halt_loop: b halt_loop chunli@ubuntu:~/my02$ chunli@ubuntu:~/my02$ cat led_on_c.c #define GPBCON (*(volatile unsigned long *)0x56000050) #define GPBDAT (*(volatile unsigned long *)0x56000054) int main() { GPBCON = 0x00000100; // 设置GPF4为输出口, 位[11:10]=0b01 GPBDAT = 0x00000000; // GPB5输出0,LED1点亮 return 0; } chunli@ubuntu:~/my02$ chunli@ubuntu:~/my02$ cat Makefile led_on_c.bin : crt0.S led_on_c.c arm-linux-gcc -g -c -o crt0.o crt0.S arm-linux-gcc -g -c -o led_on_c.o led_on_c.c arm-linux-ld -Ttext 0x0000000 -g crt0.o led_on_c.o -o led_on_c_elf arm-linux-objcopy -O binary -S led_on_c_elf led_on_c.bin arm-linux-objdump -D -m arm led_on_c_elf > led_on_c.dis clean: rm -f led_on_c.dis led_on_c.bin led_on_c_elf *.o chunli@ubuntu:~/my02$ 查看反汇编: chunli@ubuntu:~/my02$ cat led_on_c.dis led_on_c_elf: file format elf32-littlearm Disassembly of section .text: 00000000 <_start>: 0: e59f0010 ldr r0, [pc, #16] ; 18 <.text+0x18> 4: e3a01000 mov r1, #0 ; 0x0 8: e5801000 str r1, [r0] c: e3a0da01 mov sp, #4096 ; 0x1000 10: eb000001 bl 1c <main> 00000014 <halt_loop>: 14: eafffffe b 14 <halt_loop> 18: 56000010 undefined 0000001c <main>: 1c: e1a0c00d mov ip, sp 20: e92dd800 stmdb sp!, {fp, ip, lr, pc} 24: e24cb004 sub fp, ip, #4 ; 0x4 28: e3a03456 mov r3, #1442840576 ; 0x56000000 2c: e2833050 add r3, r3, #80 ; 0x50 30: e3a02c01 mov r2, #256 ; 0x100 34: e5832000 str r2, [r3] 38: e3a03456 mov r3, #1442840576 ; 0x56000000 3c: e2833054 add r3, r3, #84 ; 0x54 40: e3a02000 mov r2, #0 ; 0x0 44: e5832000 str r2, [r3] 48: e3a03000 mov r3, #0 ; 0x0 4c: e1a00003 mov r0, r3 50: e89da800 ldmia sp, {fp, sp, pc} Disassembly of section .comment: 00000000 <.comment>: 0: 43434700 cmpmi r3, #0 ; 0x0 4: 4728203a undefined 8: 2029554e eorcs r5, r9, lr, asr #10 c: 2e342e33 mrccs 14, 1, r2, cr4, cr3, {1} 10: Address 0x10 is out of bounds. Disassembly of section .debug_aranges: 00000000 <.debug_aranges>: 0: 0000001c andeq r0, r0, ip, lsl r0 4: 00000002 andeq r0, r0, r2 8: 00040000 andeq r0, r4, r0 ... 14: 0000001c andeq r0, r0, ip, lsl r0 ... 20: 0000001c andeq r0, r0, ip, lsl r0 24: 003f0002 eoreqs r0, pc, r2 28: 00040000 andeq r0, r4, r0 2c: 00000000 andeq r0, r0, r0 30: 0000001c andeq r0, r0, ip, lsl r0 34: 00000038 andeq r0, r0, r8, lsr r0 ... Disassembly of section .debug_pubnames: 00000000 <.debug_pubnames>: 0: 00000017 andeq r0, r0, r7, lsl r0 4: 003f0002 eoreqs r0, pc, r2 8: 00610000 rsbeq r0, r1, r0 c: 00420000 subeq r0, r2, r0 10: 616d0000 cmnvs sp, r0 14: 00006e69 andeq r6, r0, r9, ror #28 18: Address 0x18 is out of bounds. Disassembly of section .debug_info: 00000000 <.debug_info>: 0: 0000003b andeq r0, r0, fp, lsr r0 4: 00000002 andeq r0, r0, r2 8: 01040000 tsteq r4, r0 ... 14: 0000001c andeq r0, r0, ip, lsl r0 18: 30747263 rsbccs r7, r4, r3, ror #4 1c: 2f00532e swics 0x0000532e 20: 656d6f68 strvsb r6, [sp, #-3944]! 24: 7568632f strvcb r6, [r8, #-815]! 28: 2f696c6e swics 0x00696c6e 2c: 3230796d eorccs r7, r0, #1785856 ; 0x1b4000 30: 554e4700 strplb r4, [lr, #-1792] 34: 20534120 subcss r4, r3, r0, lsr #2 38: 35312e32 ldrcc r2, [r1, #-3634]! 3c: 5d800100 stfpls f0, [r0] 40: 02000000 andeq r0, r0, #0 ; 0x0 44: 00001400 andeq r1, r0, r0, lsl #8 48: 36010400 strcc r0, [r1], -r0, lsl #8 4c: 54000000 strpl r0, [r0] 50: 1c000000 stcne 0, cr0, [r0], {0} 54: 47000000 strmi r0, [r0, -r0] 58: 4320554e teqmi r0, #327155712 ; 0x13800000 5c: 342e3320 strcct r3, [lr], #-800 60: 0100352e tsteq r0, lr, lsr #10 64: 5f64656c swipl 0x0064656c 68: 635f6e6f cmpvs pc, #1776 ; 0x6f0 6c: 2f00632e swics 0x0000632e 70: 656d6f68 strvsb r6, [sp, #-3944]! 74: 7568632f strvcb r6, [r8, #-815]! 78: 2f696c6e swics 0x00696c6e 7c: 3230796d eorccs r7, r0, #1785856 ; 0x1b4000 80: 6d010200 sfmvs f0, 4, [r1] 84: 006e6961 rsbeq r6, lr, r1, ror #18 88: 00590501 subeqs r0, r9, r1, lsl #10 8c: 001c0000 andeqs r0, ip, r0 90: 00540000 subeqs r0, r4, r0 94: 5b010000 blpl 4009c <__bss_end__+0x38048> 98: 746e6903 strvcbt r6, [lr], #-2307 9c: 00050400 andeq r0, r5, r0, lsl #8 Disassembly of section .debug_abbrev: 00000000 <.debug_abbrev>: 0: 10001101 andne r1, r0, r1, lsl #2 4: 12011106 andne r1, r1, #-2147483647 ; 0x80000001 8: 1b080301 blne 200c14 <__bss_end__+0x1f8bc0> c: 13082508 tstne r8, #33554432 ; 0x2000000 10: 00000005 andeq r0, r0, r5 14: 10011101 andne r1, r1, r1, lsl #2 18: 11011206 tstne r1, r6, lsl #4 1c: 13082501 tstne r8, #4194304 ; 0x400000 20: 1b08030b blne 200c54 <__bss_end__+0x1f8c00> 24: 02000008 andeq r0, r0, #8 ; 0x8 28: 0c3f002e ldceq 0, cr0, [pc], #-184 2c: 0b3a0803 bleq e82040 <__bss_end__+0xe79fec> 30: 13490b3b cmpne r9, #60416 ; 0xec00 34: 01120111 tsteq r2, r1, lsl r1 38: 00000a40 andeq r0, r0, r0, asr #20 3c: 03002403 tsteq r0, #50331648 ; 0x3000000 40: 3e0b0b08 fmacdcc d0, d11, d8 44: 0000000b andeq r0, r0, fp Disassembly of section .debug_line: 00000000 <.debug_line>: 0: 00000032 andeq r0, r0, r2, lsr r0 4: 001a0002 andeqs r0, sl, r2 8: 01020000 tsteq r2, r0 c: 000a0efb streqd r0, [sl], -fp 10: 01010101 tsteq r1, r1, lsl #2 14: 01000000 tsteq r0, r0 18: 74726300 ldrvcbt r6, [r2], #-768 1c: 00532e30 subeqs r2, r3, r0, lsr lr 20: 00000000 andeq r0, r0, r0 24: 00020500 andeq r0, r2, r0, lsl #10 28: 17000000 strne r0, [r0, -r0] 2c: 2d2d2c2c stccs 12, cr2, [sp, #-176]! 30: 0004022d andeq r0, r4, sp, lsr #4 34: 00350101 eoreqs r0, r5, r1, lsl #2 38: 00020000 andeq r0, r2, r0 3c: 0000001e andeq r0, r0, lr, lsl r0 40: 0efb0102 cdpeq 1, 15, cr0, cr11, cr2, {0} 44: 0101000a tsteq r1, sl 48: 00000101 andeq r0, r0, r1, lsl #2 4c: 6c000100 stfvss f0, [r0], {0} 50: 6f5f6465 swivs 0x005f6465 54: 2e635f6e cdpcs 15, 6, cr5, cr3, cr14, {3} 58: 00000063 andeq r0, r0, r3, rrx 5c: 05000000 streq r0, [r0] 60: 00001c02 andeq r1, r0, r2, lsl #24 64: 80641300 rsbhi r1, r4, r0, lsl #6 68: 04022c81 streq r2, [r2], #-3201 6c: Address 0x6c is out of bounds. Disassembly of section .debug_frame: 00000000 <.debug_frame>: 0: 0000000c andeq r0, r0, ip 4: ffffffff swinv 0x00ffffff 8: 7c010001 stcvc 0, cr0, [r1], {1} c: 000d0c0e andeq r0, sp, lr, lsl #24 10: 0000001c andeq r0, r0, ip, lsl r0 14: 00000000 andeq r0, r0, r0 18: 0000001c andeq r0, r0, ip, lsl r0 1c: 00000038 andeq r0, r0, r8, lsr r0 20: 440c0d44 strmi r0, [ip], #-3396 24: 038d028e orreq r0, sp, #-536870904 ; 0xe0000008 28: 0c44048b cfstrdeq mvd0, [r4], {139} 2c: 0000040b andeq r0, r0, fp, lsl #8 chunli@ubuntu:~/my02$
效果图
4 LED 轮流闪烁:
chunli@ubuntu:~/my02$ cat crt0.S @****************************************************************************** @ File:crt0.S @ 功能:通过它转入C程序 @****************************************************************************** .text .global _start _start: ldr r0, =0x56000010 @ WATCHDOG寄存器地址 mov r1, #0x0 str r1, [r0] @ 写入0,禁止WATCHDOG,否则CPU会不断重启 ldr sp, =1024*4 @ 设置堆栈,注意:不能大于4k, 因为现在可用的内存只有4K @ nand flash中的代码在复位后会移到内部ram中,此ram只有4K bl main @ 调用C程序中的main函数 halt_loop: b halt_loop chunli@ubuntu:~/my02$ chunli@ubuntu:~/my02$ chunli@ubuntu:~/my02$ chunli@ubuntu:~/my02$ chunli@ubuntu:~/my02$ chunli@ubuntu:~/my02$ chunli@ubuntu:~/my02$ chunli@ubuntu:~/my02$ cat led_on_c.c #define GPFCON (*(volatile unsigned long *)0x56000050) #define GPFDAT (*(volatile unsigned long *)0x56000054) #define GPF4_out (1<<(4*2)) #define GPF5_out (1<<(5*2)) #define GPF6_out (1<<(6*2)) #define GPF7_out (1<<(7*2)) void wait(volatile unsigned long dly) { for(; dly > 0; dly--); } int main(void) { unsigned long i = 0; GPFCON = GPF4_out|GPF5_out|GPF6_out; // 将LED1-3对应的GPF4/5/6三个引脚设为输出 while(1){ wait(30000); GPFDAT = (~(i<<4)); // 根据i的值,点亮LED1-3 if(++i == 8) i = 0; } return 0; } chunli@ubuntu:~/my02$ chunli@ubuntu:~/my02$ chunli@ubuntu:~/my02$ chunli@ubuntu:~/my02$ chunli@ubuntu:~/my02$ cat Makefile led_on_c.bin : crt0.S led_on_c.c arm-linux-gcc -g -c -o crt0.o crt0.S arm-linux-gcc -g -c -o led_on_c.o led_on_c.c arm-linux-ld -Ttext 0x0000000 -g crt0.o led_on_c.o -o led_on_c_elf arm-linux-objcopy -O binary -S led_on_c_elf led_on_c.bin arm-linux-objdump -D -m arm led_on_c_elf > led_on_c.dis clean: rm -f led_on_c.dis led_on_c.bin led_on_c_elf *.o chunli@ubuntu:~/my02$
C语言,按键控制LED
chunli@ubuntu:~/my02$ cat crt0.S @****************************************************************************** @ File:crt0.S @ 功能:通过它转入C程序 @****************************************************************************** .text .global _start _start: ldr r0, =0x56000010 @ WATCHDOG寄存器地址 mov r1, #0x0 str r1, [r0] @ 写入0,禁止WATCHDOG,否则CPU会不断重启 ldr sp, =1024*4 @ 设置堆栈,注意:不能大于4k, 因为现在可用的内存只有4K @ nand flash中的代码在复位后会移到内部ram中,此ram只有4K bl main @ 调用C程序中的main函数 halt_loop: b halt_loop chunli@ubuntu:~/my02$ chunli@ubuntu:~/my02$ chunli@ubuntu:~/my02$ chunli@ubuntu:~/my02$ chunli@ubuntu:~/my02$ chunli@ubuntu:~/my02$ chunli@ubuntu:~/my02$ chunli@ubuntu:~/my02$ chunli@ubuntu:~/my02$ chunli@ubuntu:~/my02$ chunli@ubuntu:~/my02$ chunli@ubuntu:~/my02$ chunli@ubuntu:~/my02$ chunli@ubuntu:~/my02$ chunli@ubuntu:~/my02$ chunli@ubuntu:~/my02$ cat led_on_c.c #define GPFCON (*(volatile unsigned long *)0x56000050) #define GPFDAT (*(volatile unsigned long *)0x56000054) #define GPGCON (*(volatile unsigned long *)0x56000060) #define GPGDAT (*(volatile unsigned long *)0x56000064) /* * LED1-4对应GPF4、GPF5、GPF6 */ #define GPF4_out (1<<(4*2)) // 5,4 位 变0,1 #define GPF5_out (1<<(5*2)) // 7,6 位 变0,1 #define GPF6_out (1<<(6*2)) // 9,8 位 变0,1 /* * K1-K4对应GPG11、GPG3、GPF2、GPF0 */ #define GPG3_in 3<<(3*2) // 7,6 位 变1,1 #define GPF2_in 3<<(2*2) // 5,4 位 变1,1 #define GPF0_in 3<<(0*2) // 1,0 位 变1,1 int main() { unsigned long dwDat; // GPF4,GPF5,GPF6,接的3个LED 对应的3根引脚设为输出 GPFCON &= ~(GPF4_out | GPF5_out | GPF6_out) ; //清零对应的3个引脚的配置位,不要影响其他位 GPFCON |= (GPF4_out | GPF5_out | GPF6_out) ; //对这3个引脚配置为01输出,不要影响其他位 // GPG3 对应的按键引脚设为输入 GPGCON &= ~( GPG3_in) ; GPGCON |= ( GPG3_in) ; // GPF0,GPF2,对应的2个按键引脚设为输入 GPFCON &= ~( GPF2_in | GPF0_in) ; GPFCON |= ( GPF2_in | GPF0_in) ; while(1){ //若Kn为0(表示按下),则令LEDn为0(表示点亮) dwDat = GPGDAT; // 读取GPG管脚电平状态 if (dwDat & (1<<3)) // GPG3 为按键 GPFDAT |= (1<<6); // 控制GPF6的亮灭,1灭 else GPFDAT &= ~(1<<6); // GPF6 0 亮 dwDat = GPFDAT; // 读取GPF管脚电平状态 if (dwDat & (1<<2)) // GPF2 为按键 GPFDAT |= (1<<4); // 控制GPF4的亮灭,1灭 else GPFDAT &= ~(1<<4); //GPF4 0 亮 if (dwDat & (1<<0)) // GPF0 为按键 GPFDAT |= (1<<5); // 控制GPF5的亮灭,1灭 else GPFDAT &= ~(1<<5); // GPF5 0 亮 } return 0; } chunli@ubuntu:~/my02$ chunli@ubuntu:~/my02$ chunli@ubuntu:~/my02$ chunli@ubuntu:~/my02$ cat Makefile led_on_c.bin : crt0.S led_on_c.c arm-linux-gcc -g -c -o crt0.o crt0.S arm-linux-gcc -g -c -o led_on_c.o led_on_c.c arm-linux-ld -Ttext 0x0000000 -g crt0.o led_on_c.o -o led_on_c_elf arm-linux-objcopy -O binary -S led_on_c_elf led_on_c.bin arm-linux-objdump -D -m arm led_on_c_elf > led_on_c.dis clean: rm -f led_on_c.dis led_on_c.bin led_on_c_elf *.o chunli@ubuntu:~/my02$
按下这旁边的三个按键,对应的三个led就会亮起