首先感谢网友张旭zhangxu 提供的PIX镜像文件和序列号!下载地址:http://down.51cto.com/data/316236
第一步打开GNS3---Edit--Preference--Qemu--PIX
按照上面的弄完后save即可,然后回到GNS3中,这时候就可以拖PIX出来了,接下来就还需要再激活PIX!方法如下:
启动PIX
pixfirewall> en
Password://直接回车即可
pixfirewall# show version
Cisco PIX Security Appliance Software Version 7.2(2)
Compiled on Wed 22-Nov-06 14:16 by builders
System p_w_picpath file is "Unknown, monitor mode tftp booted p_w_picpath"
Config file at boot was "startup-config"
pixfirewall up 13 secs
Hardware: PIX-525, 128 MB RAM, CPU Pentium II 1 MHz
Flash E28F128J3 @ 0xfff00000, 16MB
BIOS Flash AM29F400B @ 0xfffd8000, 32KB
0: Ext: Ethernet0 : address is 0000.ab96.d100, irq 9
1: Ext: Ethernet1 : address is 0000.ab8a.0101, irq 11
2: Ext: Ethernet2 : address is 0000.ab6c.1402, irq 11
3: Ext: Ethernet3 : address is 0000.abc7.6403, irq 11
4: Ext: Ethernet4 : address is 0000.ab36.6c04, irq 11
Licensed features for this platform:
Maximum Physical Interfaces : 10
Maximum VLANs : 100
Inside Hosts : Unlimited
Failover : disabled
×××-DES : disabled
×××-3DES-AES : disabled
Cut-through Proxy : Enabled
Guards : Enabled
URL Filtering : Enabled
Security Contexts : 2
GTP/GPRS : Disabled
××× Peers : Unlimited
This platform has an Unrestricted (UR) license.
Serial Number: 808102688 //序列号
Running Activation Key: 0×00000000 0×00000000 0×00000000 0×00000000 //激活码
Configuration has not been modified since last system restart.
pixfirewall(config)# activation-key 0xd2390d2c 0x9fc4b36d 0x98442d99 0xeef7d8b1
pixfirewall# wr 保存