思科路由器做DHCP服务器配置

原创

chenxu123 2013-02-22 21:52:10 博主文章分类：路由交换 ©著作权

文章标签 ip 思科路由器 command Enter DHCP 文章分类 服务器

©著作权归作者所有：来自51CTO博客作者chenxu123的原创作品，请联系作者获取转载授权，否则将追究法律责任

Router>en
Router#ip dhcp ?
% Unrecognized command
Router#conf
Router#configure ter
Router#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#ip
Router(config)#ip dhcp ?
excluded-address Prevent DHCP from assigning certain addresses
pool              Configure DHCP address pools
Router(config)#ip dhcp poo
Router(config)#ip dhcp pool globe                                      #定义一个名称为globe的地址池
Router(dhcp-config)#netwo
Router(dhcp-config)#network 192.168.1.0 255.255.255.0                #定义地址网段
Router(dhcp-config)#defa
Router(dhcp-config)#default-router 192.168.1.254                           #网关地址
Router(dhcp-config)#dns
Router(dhcp-config)#dns-server 8.8.8.8                                               #DNS地址
Router(dhcp-config)#ip dhcp excl
Router(dhcp-config)#ip dhcp exclud
Router(dhcp-config)#ip dhcp excluded-address 192.168.1.200 192.168.1.254          #不开放地址范围
Router(config)#sho
Router(config)#show
Router(config)#^Z
Router#
%SYS-5-CONFIG_I: Configured from console by console