centos下多网卡做bond脚本

原创

zphj1987 2015-03-22 22:51:00 博主文章分类：硬件相关 ©著作权

文章标签 其他 文章分类 开源

©著作权归作者所有：来自51CTO博客作者zphj1987的原创作品，请联系作者获取转载授权，否则将追究法律责任

多网卡或者单网卡形式下的网卡bonding

#! /bin/sh
#获取当前网卡数
ethnum=`lspci | grep Ethernet | wc -l`
echo $ethnum
#如果网卡数小于等于1则什么都不做
if [ $ethnum -le 1 ]
        then
        echo "do nothing!"
fi
#如果网卡数大于等于2则
if [ $ethnum -ge 2 ]
        then

    
#-------  添加一个bond0的网卡
    echo "DEVICE=bond0" > /etc/sysconfig/network-scripts/ifcfg-bond0
    echo "ONBOOT=yes" >> /etc/sysconfig/network-scripts/ifcfg-bond0
    echo "IPADDR=192.168.3.104" >> /etc/sysconfig/network-scripts/ifcfg-bond0
    echo "NETMASK=255.255.0.0" >> /etc/sysconfig/network-scripts/ifcfg-bond0
    echo "GATEWAY=192.168.1.1" >> /etc/sysconfig/network-scripts/ifcfg-bond0
    echo "BOOTPROTO=static" >> /etc/sysconfig/network-scripts/ifcfg-bond0
    echo "USERCTL=no" >> /etc/sysconfig/network-scripts/ifcfg-bond0
#--------
    echo "ifenslave bond0" >> /etc/rc.local
#--------写其他网卡的配置文件
    for i in $(seq $ethnum);
    do
num=`expr $i - 1`
        echo "BOOTPROTO=none" >  /etc/sysconfig/network-scripts/ifcfg-eth$num
        echo "DEVICE=eth$num" >>  /etc/sysconfig/network-scripts/ifcfg-eth$num
        echo "ONBOOT=yes" >>  /etc/sysconfig/network-scripts/ifcfg-eth$num
        echo "MASTER=bond0" >>  /etc/sysconfig/network-scripts/ifcfg-eth$num
        echo "USERCTL=no" >>  /etc/sysconfig/network-scripts/ifcfg-eth$num
        echo "SLAVE=yes" >>  /etc/sysconfig/network-scripts/ifcfg-eth$num
        sed -i 's/ifenslave.*/& eth'"$num"'/g' /etc/rc.local
    done;
echo "alias bond0 bonding" > /etc/modprobe.d/modprobe.conf
echo "options bond0 miimon=100 mode=balance-rr" >> /etc/modprobe.d/modprobe.conf
        modprobe bonding
    /etc/init.d/network   restart
fi