网址： http://www.server-world.info/en/note?os=CentOS_7&p=glusterfs&f=1
Install GlusterFS to Configure Storage Cluster.
It is recommended to use partitions for GlusterFS volumes which are different from the / partition.
The environment on this example is set as that sdb1 is mounted on /glusterfs directory for GlusterFS Configuration on all Nodes.
| [1] | Install GlusterFS Server on all Nodes in Cluster. |
[root@node01 ~]# yum -y install centos-release-gluster38 [root@node01 ~]# sed -i -e "s/enabled=1/enabled=0/g" /etc/yum.repos.d/CentOS-Gluster-3.8.repo # enable EPEL, too
yum --enablerepo=centos-gluster38,epel -y install glusterfs-server [root@node01 ~]#systemctl start glusterd [root@node01 ~]# systemctl enable glusterd |
| [2] | If Firewalld is running, allow GlusterFS service on all nodes. |
| [root@node01 ~]# firewall-cmd --add-service=glusterfs --permanent success [root@node01 ~]# firewall-cmd --reload success |
It's OK if you mount GlusterFS volumes from clients with GlusterFS Native Client. | |
| [3] | GlusterFS supports NFS (v3), so if you mount GlusterFS volumes from clients with NFS, Configure additinally like follows. |
[root@node01 ~]# yum -y install rpcbind [root@node01 ~]#systemctl start rpcbind [root@node01 ~]# systemctl enable rpcbind [root@node01 ~]# systemctl restart glusterd # if Firewalld is running, allow services below [root@node01 ~]# firewall-cmd --add-service={nfs,rpc-bind} --permanent [root@node01 ~]# firewall-cmd --reload |
| [4] | Installing and Basic Settings of GlusterFS are OK. Refer to next section for settings of clustering. |
