Zabbix Server端配置文件说明

Zabbix Server端配置文件说明

# This is a configuration file for Zabbix Server process

# To get more information about Zabbix,

# visit http://www.zabbix.com

############ GENERAL PARAMETERS #################

### Option: NodeID

#   Unique NodeID in distributed setup.

#   0 - standalone server

#

# Mandatory: no

# Range: 0-999

# Default:

#说明：服务端节点Id，0表示只有一台服务端；主要用于服务端分布式部署时，视使用者设计ZABBIX系统架构调整

# NodeID=0

### Option: ListenPort

#   Listen port for trapper.

#

# Mandatory: no

# Range: 1024-32767

# Default:

#说明:服务端监听端口用于接收二级代理或直连AGENT的采集数据

# ListenPort=10051

### Option: SourceIP

#   Source IP address for outgoing connections.

#

# Mandatory: no

# Default:

#说明：服务端监听IP，建议指定

# SourceIP=

### Option: LogFile

#   Name of log file.

#   If not set, syslog is used.

#

# Mandatory: no

# Default:

# LogFile=

#说明：zabbix服务端日志路径，视具体情况指定

LogFile=/smp/sncmon/zabbix_server.log

### Option: LogFileSize

#   Maximum size of log file in MB.

#   0 - disable automatic log rotation.

#

# Mandatory: no

# Range: 0-1024

# Default:

#说明：日志达到多少M里就轮转；若此参数值为0时，则不轮转，日志将不断变大，建议设置成轮转

# LogFileSize=1

### Option: DebugLevel

#   Specifies debug level

#   0 - no debug 无日志

#   1 - critical information  灾难日志，日志量较少

#   2 - error information  错误级别，日志量大于CRITICAL级别

#   3 - warnings    告警级别，日志量大于ERROR级别

#   4 - for debugging (produces lots of information)调试级别，日志量大于WARNING

#

# Mandatory: no

# Range: 0-4

# Default:

#说明：日志级别0~4，单位时间内生成日志的量不断增大

# DebugLevel=3

### Option: PidFile

#   Name of PID file.

#

# Mandatory: no

# Default:

#说明：zabbix服务端程序PID路径

# PidFile=/tmp/zabbix_server.pid

### Option: DBHost

#   Database host name.

#   If set to localhost, socket is used for MySQL.

#   If set to empty string, socket is used for PostgreSQL.

#

# Mandatory: no

# Default:

#说明：指定数据库信息，对于mysql，若设置为localhost则mysql用SOCKET来连接(需配合参数 DBSocket 使用)，否则用IP连接；若DHHOST值为空，则默认连接PostgreSQL

# DBHost=localhost

### Option: DBName

#   Database name.

#   For SQLite3 path to database file must be provided. DBUser and DBPassword are ignored.

#

# Mandatory: yes

# Default:

# DBName=

#说明：服务端连接数据库的库名

DBName=smp

### Option: DBSchema

#   Schema name. Used for IBM DB2.

#

# Mandatory: no

# Default:

#说明：专门用于 IBM DB2数据库的连接信息

# DBSchema=

### Option: DBUser

#   Database user. Ignored for SQLite.

#

# Mandatory: no

# Default:

#说明：连接数据库的用户

# DBUser=

DBUser=root

### Option: DBPassword

#   Database password. Ignored for SQLite.

#   Comment this line if no password is used.

#

# Mandatory: no

# Default:

#说明：连接数据库的密码

DBPassword=123

### Option: DBSocket

#   Path to MySQL socket.

#

# Mandatory: no

# Default:

#说明：指定MYSQL的SOCK连接路径

# DBSocket=/tmp/mysql.sock

### Option: DBPort

#   Database port when not using local socket. Ignored for SQLite.

#

# Mandatory: no

# Range: 1024-65535

# Default (for MySQL):

#说明：指定连接数据库的端口

DBPort=3306

############ ADVANCED PARAMETERS ################

#高级参数

### Option: StartPollers

#   Number of pre-forked instances of pollers.

#

# Mandatory: no

# Range: 0-1000

# Default:

#说明;初始化时，启动子进程数量，数量越多，则服务端吞吐能力越强，对系统资源消耗越大

# StartPollers=5

### Option: StartIPMIPollers

#   Number of pre-forked instances of IPMI pollers.

#

# Mandatory: no

# Range: 0-1000

# Default:

#

#说明:主要用于IPmi技术用于获取硬件状态场景。若无相关监控项，建议设置为0

# StartIPMIPollers=0

### Option: StartPollersUnreachable

#   Number of pre-forked instances of pollers for unreachable hosts (including IPMI).

#

# Mandatory: no

# Range: 0-1000

# Default:

#说明：默认情况下，ZABBIX会启用指定进程用于探测某些不可达主机的（含IPMI场景）；若使用场景中含有代理端，建议保持默认；若直接agent较多，可视具体情况调整

# StartPollersUnreachable=1

### Option: StartTrappers

#   Number of pre-forked instances of trappers.

#   Trappers accept incoming connections from Zabbix sender, active agents, active proxies and child nodes.

#   At least one trapper process must be running to display server availability in the frontend.

#

# Mandatory: no

# Range: 0-1000

# Default:

说明：用于设置诸如SNMP STRAPPER场景提交来的数据的接收进程数，若客户机SNMP TRAPPER技术较多，建议加大此参数值

# StartTrappers=5

### Option: StartPingers

#   Number of pre-forked instances of ICMP pingers.

#

# Mandatory: no

# Range: 0-1000

# Default:

#说明：用于设置启用icmp协议PING主机方式启动线程数量，若单台代理所管理机器超过500台，建议加大此数值

# StartPingers=1

### Option: StartDiscoverers

#   Number of pre-forked instances of discoverers.

#

# Mandatory: no

# Range: 0-250

# Default:

说明：用于设置自动发现主机的线程数量，若单台代理所管理机器超过500台，可以考虑加大此数值（仅适用于直接AGENT场景）

# StartDiscoverers=1

### Option: StartHTTPPollers

#   Number of pre-forked instances of HTTP pollers.

#

# Mandatory: no

# Range: 0-1000

# Default:

#说明：用于设置WEB拨测监控线程数，可视具体情况增加或减少此数值。

# StartHTTPPollers=1

### Option: StartTimers

#   Number of pre-forked instances of timers.

#   Timers process time-based trigger functions and maintenance periods.

#   Only the first timer process handles the maintenance periods.

#

# Mandatory: no

# Range: 1-1000

# Default:

#说明：各实例计时器数量，主要用于触发器，标有维护标识的主机，但只第一个计时器用于计算维护标识主机。

# StartTimers=1

### Option: JavaGateway

#   IP address (or hostname) of Zabbix Java gateway.

#   Only required if Java pollers are started.

#

# Mandatory: no

# Default:

#说明：JAVAGATEWAY 场景下使用

# JavaGateway=

### Option: JavaGatewayPort

#   Port that Zabbix Java gateway listens on.

#

# Mandatory: no

# Range: 1024-32767

# Default:

#说明：JAVAGATEWAY 场景下使用

# JavaGatewayPort=10052

### Option: StartJavaPollers

#   Number of pre-forked instances of Java pollers.

#

# Mandatory: no

# Range: 0-1000

# Default:

#说明：JAVAGATEWAY 场景下使用

# StartJavaPollers=0

### Option: StartVMwareCollectors

#   Number of pre-forked vmware collector instances.

#

# Mandatory: no

# Range: 0-250

# Default:

#说明：用于设置监控VMWARE Esxi主机实例时使用，若为0则不启用，若要监控ESXI主机，此值最少为1 ；视监控ESXI数量设置对应数值

# StartVMwareCollectors=0

### Option: VMwareFrequency

#   How often Zabbix will connect to VMware service to obtain a new data.

#

# Mandatory: no

# Range: 10-86400

# Default:

#说明：代理端访问 VMWARE service的频率，单位:秒

# VMwareFrequency=60

### Option: VMwareCacheSize

#   Size of VMware cache, in bytes.

#   Shared memory size for storing VMware data.

#   Only used if VMware collectors are started.

#

# Mandatory: no

# Range: 256K-2G

# Default:

#说明：划出多少共享内存用于存储VMWARE数据

# VMwareCacheSize=8M

### Option: SNMPTrapperFile

#   Temporary file used for passing data from SNMP trap daemon to the server.

#   Must be the same as in zabbix_trap_receiver.pl or SNMPTT configuration file.

#

# Mandatory: no

# Default:

#说明：指定SNMP TRAPPER 时的临时文件，用于代理端启用SNMP TRAPPER功能时使用

# SNMPTrapperFile=/tmp/zabbix_traps.tmp

### Option: StartSNMPTrapper

#   If 1, SNMP trapper process is started.

#

# Mandatory: no

# Range: 0-1

# Default:

#说明：是否启用 snmptrapper功能 ，默认不启用=0，启用=1（配合参数SNMPTrapperFile使用）

# StartSNMPTrapper=0

### Option: ListenIP

#   List of comma delimited IP addresses that the trapper should listen on.

#   Trapper will listen on all network interfaces if this parameter is missing.

#

# Mandatory: no

# Default:

说明：启用SNMPTRAPPER里 ，接收端监听的IP，此参数与StartSNMPTrapper，SNMPTrapperFile 联合使用

# ListenIP=0.0.0.0

# ListenIP=127.0.0.1

### Option: HousekeepingFrequency

#   How often Zabbix will perform housekeeping procedure (in hours).

#   Housekeeping is removing unnecessary information from history, alert, and alarms tables.

#

# Mandatory: no

# Range: 1-24

# Default:

#说明：多少小时清理一次代理端数据库的 history, alert, and alarms，以保持代理端数据库轻便，建议保持默认

# HousekeepingFrequency=1

### Option: MaxHousekeeperDelete

#   The table "housekeeper" contains "tasks" for housekeeping procedure in the format:

#   [housekeeperid], [tablename], [field], [value].

#   No more than 'MaxHousekeeperDelete' rows (corresponding to [tablename], [field], [value])

#   will be deleted per one task in one housekeeping cycle.

#   SQLite3 does not use this parameter, deletes all corresponding rows without a limit.

#   If set to 0 then no limit is used at all. In this case you must know what you are doing!

#

# Mandatory: no

# Range: 0-1000000

# Default:

# MaxHousekeeperDelete=500

### Option: SenderFrequency

#   How often Zabbix will try to send unsent alerts (in seconds).

#

# Mandatory: no

# Range: 5-3600

# Default:

#说明:多少秒后重试发送失败的报警信息

# SenderFrequency=30

### Option: CacheSize

#   Size of configuration cache, in bytes.

#   Shared memory size for storing host, item and trigger data.

#

# Mandatory: no

# Range: 128K-2G

# Default:

#说明;zabbix初始化时占用多少系统共享内存用于存储配置信息，HOST,ITEM,TRIGGER数据，视监控主机数量和监控项调整，建议调整到32M或者更大

# CacheSize=8M

### Option: CacheUpdateFrequency

#   How often Zabbix will perform update of configuration cache, in seconds.

#

# Mandatory: no

# Range: 1-3600

# Default:

#说明：zabbix更新操作系统CACHE频率，若管理页面操作不频繁，可以考虑加大参数值

# CacheUpdateFrequency=60

### Option: StartDBSyncers

#   Number of pre-forked instances of DB Syncers

#

# Mandatory: no

# Range: 1-100

# Default:

#说明:将采集数据从CACHE同步到数据库线程数量，视数据库服务器I/O繁忙情况，和数据库写能力调整。数值越大，写能力越强。对数据库服务器I/O压力越大。

# StartDBSyncers=4

### Option: HistoryCacheSize

#   Size of history cache, in bytes.

#   Shared memory size for storing history data.

#

# Mandatory: no

# Range: 128K-2G

# Default:

#说明：用于设置划分多少系统共享内存用于存储采集的历史数据，此数值越大，数据库读压力越小

# HistoryCacheSize=8M

### Option: TrendCacheSize

#   Size of trend cache, in bytes.

#   Shared memory size for storing trends data.

#

# Mandatory: no

# Range: 128K-2G

# Default:

#说明：用于设置划分多少系统共享内存用于存储计算出来的趋势数据，此参数值从一定程度上可影响数据库读压力

# TrendCacheSize=4M

### Option: HistoryTextCacheSize

#   Size of text history cache, in bytes.

#   Shared memory size for storing character, text or log history data.

#

# Mandatory: no

# Range: 128K-2G

# Default:

#说明:指定划出多少系统共享内存用于存储 character, text or log history数据，若二级代理内存足够，建议可适当扩大此数值，可很大程度上解决系统I/O压力，和数据库读压力

# HistoryTextCacheSize=16M

### Option: ValueCacheSize

#   Size of history value cache, in bytes.

#   Shared memory size for caching item history data requests

#   Setting to 0 disables value cache.

#

# Mandatory: no

# Range: 0,128K-64G

# Default:

#说明：划出系统多少共享内存用于已请求的存储监控项信息，若监控项较多，建议加大此数值

# ValueCacheSize=8M

### Option: NodeNoEvents

#   If set to '1' local events won't be sent to master node.

#   This won't impact ability of this node to propagate events from its child nodes.

#

# Mandatory: no

# Range: 0-1

# Default:

#说明：若节点为子结点，是否允许本地事件（events表）发送到主节点，1为不发送，但不影响此节点以下的节点的传播能力，视ZABBIX分布式系统架构设计开启或关闭。在不明架构前提下，建议保持默认

# NodeNoEvents=0

### Option: NodeNoHistory

#   If set to '1' local history won't be sent to master node.

#   This won't impact ability of this node to propagate history from its child nodes.

#

# Mandatory: no

# Range: 0-1

# Default:

说明：若节点为子结点，是否允许本地历史数据发送到主节点，1为不发送，但不影响此节点以下的节点的传播能力，视ZABBIX分布式系统架构设计开启或关闭，在不明架构前提下，建议保持默认

# NodeNoHistory=0

### Option: Timeout

#   Specifies how long we wait for agent, SNMP device or external check (in seconds).

#

# Mandatory: no

# Range: 1-30

# Default:

#说明：与AGNET\SNMP设备和其它外部设备通信超时设置，单位为秒；若采集数据不完整或网络繁忙，或从管理页面发现客户端状态变化频繁，可以考虑加大此数值。注意若此数值加大，应该考虑参数 StartPollers 是否有相应加大的必要。

# Timeout=3

### Option: TrapperTimeout

#   Specifies how many seconds trapper may spend processing new data.

#

# Mandatory: no

# Range: 1-300

# Default:

#说明：启用 trapper功能，用于进程等待超时设置。根据需要调整

# TrapperTimeout=300

### Option: UnreachablePeriod

#   After how many seconds of unreachability treat a host as unavailable.

#

# Mandatory: no

# Range: 1-3600

# Default:

#说明：当AGNET端处于不可用状态下，间隔多少秒后，尝试重新连接。建议根据具体情况设置。注意，若此数值过小，右agent端业务系统繁忙时，有可能造成报警信息误报

# UnreachablePeriod=45

### Option: UnavailableDelay

#   How often host is checked for availability during the unavailability period, in seconds.

#

# Mandatory: no

# Range: 1-3600

# Default:

#说明:当AGENT端处于可用状态下，间隔多少秒后，进行状态检查。若出现可正常采集数据，但管理页面AGENT状态不正常；若在网络，端口等均通畅情况下，AGENT状态仍不正常，可以考虑加大此数值

# UnavailableDelay=60

### Option: UnreachableDelay

#   How often host is checked for availability during the unreachability period, in seconds.

#

# Mandatory: no

# Range: 1-3600

# Default:

#说明：当agent端处于不可达状态下，延迟多少秒后，进行重新尝试，建议保持默认，在AGENT接入调试阶段，可考虑减少此数值

# UnreachableDelay=15

### Option: AlertScriptsPath

#   Full path to location of custom alert scripts.

#   Default depends on compilation options.

#

# Mandatory: no

# Default:

#说明：监控报警脚本路径，非研发人员不建议修改此参数值

# AlertScriptsPath=${datadir}/zabbix/alertscripts

### Option: ExternalScripts

#   Full path to location of external scripts.

#   Default depends on compilation options.

#

# Mandatory: no

# Default:

#说明：自定义脚本存储路径，非研发人员不建议修改此参数值

# ExternalScripts=${datadir}/zabbix/externalscripts

### Option: FpingLocation

#   Location of fping.

#   Make sure that fping binary has root ownership and SUID flag set.

#

# Mandatory: no

# Default:

#说明：IPv4 FPING命令路径，仅ROOT可用。注意使用此命令时，应该确认此命令是否存在

# FpingLocation=/usr/sbin/fping

### Option: Fping6Location

#   Location of fping6.

#   Make sure that fping6 binary has root ownership and SUID flag set.

#   Make empty if your fping utility is capable to process IPv6 addresses.

#

# Mandatory: no

# Default:

#说明：IPv6 FPING命令路径，仅ROOT可用。注意使用此命令时，应该确认此命令是否存在

# Fping6Location=/usr/sbin/fping6

### Option: SSHKeyLocation

#   Location of public and private keys for SSH checks and actions.

#

# Mandatory: no

# Default:

#说明：在服务端需要SSH到AGENT端且采用用KEY验证方式时使用。非研发人员，不建议修改或设置

# SSHKeyLocation=

### Option: LogSlowQueries

#   How long a database query may take before being logged (in milliseconds).

#   Only works if DebugLevel set to 3 or 4.

#   0 - don't log slow queries.

#

# Mandatory: no

# Range: 1-3600000

# Default:

#说明:用于服务端数据库慢查询功能，单位是毫秒；1毫秒=0.001秒，若有服务端数据库监控慢查询的需求，可以视具体情况调整此数。

# LogSlowQueries=0

### Option: TmpDir

#   Temporary directory.

#

# Mandatory: no

# Default:

#说明：zabbix服务端工作的临时目录

# TmpDir=/tmp

### Option: StartProxyPollers

#   Number of pre-forked instances of pollers for passive proxies.

#

# Mandatory: no

# Range: 0-250

# Default:

#说明:启用多少子进程与代理端通信，若代理端较多可考虑加大此数值

# StartProxyPollers=1

### Option: ProxyConfigFrequency

#   How often Zabbix Server sends configuration data to a Zabbix Proxy in seconds.

#   This parameter is used only for proxies in the passive mode.

#

# Mandatory: no

# Range: 1-3600*24*7

# Default:

#说明：zabbix服务端将配置文件数据同步到代理端的频率，仅适用于代理端为被动模式情况 下

# ProxyConfigFrequency=3600

### Option: ProxyDataFrequency

#   How often Zabbix Server requests history data from a Zabbix Proxy in seconds.

#   This parameter is used only for proxies in the passive mode.

#

# Mandatory: no

# Range: 1-3600

# Default:

说明：zabbix服务端请求代理端采集的数据的频率，仅适用代理端为被动模式情况下

# ProxyDataFrequency=1

### Option: AllowRoot

#   Allow the server to run as 'root'. If disabled and the server is started by 'root', the server

#   will try to switch to user 'zabbix' instead. Has no effect if started under a regular user.

#   0 - do not allow 不允许

#   1 - allow 允许

#

# Mandatory: no

# Default:

#说明：是否允许以root身份运行服务端

# AllowRoot=0

### Option: Include

#   You may include individual files or all files in a directory in the configuration file.

#   InstallingZabbix will create include directory in /usr/local/etc, unless modified during the compile time.

#

# Mandatory: no

# Default:

#说明：在一些情况下，软件的参数配置文件很长，为了方便管理，将配置文件切割成N个配置文件，但为了主配置参数文件的简洁，便会启用INCLUDE参数，以方便程序读取指定目录下的所有配置文件

# Include=

# Include=/usr/local/etc/zabbix_server.general.conf

# Include=/usr/local/etc/zabbix_server.conf.d/

####### LOADABLE MODULES #######

### Option: LoadModulePath

#   Full path to location of server modules.

#   Default depends on compilation options.

#

# Mandatory: no

# Default:

#指定本地模块路径，非研发人员不建议修改

# LoadModulePath=${libdir}/modules

### Option: LoadModule

#   Module to load at server startup. Modules are used to extend functionality of the server.

#   Format: LoadModule=<module.so>

#   The modules must be located in directory specified by LoadModulePath.

#   It is allowed to include multiple LoadModule parameters.

#

# Mandatory: no

# Default:

#指定本地模块路径，非研发人员不建议修改

# LoadModule=


这个就是zabbix-server配置文件的详细解释，希望能帮助到大家。