配置ISCSI

精选转载

我是风二 2015-08-05 11:10:28

文章标签 认证 start target 文章分类 服务器

http://www.linuxidc.com/Linux/2015-04/116093.htmRHCE7认证学习笔记34——配置ISCSI

[日期：2015-04-12]

来源：Linux社区作者：linjohn

[字体：大中小]

RHCE7认证学习笔记34——配置ISCSI

一、存储设备类型

DSA：直接区域存储
NAS:网络区域存储
SAN：存储区域网络，块级别共享

二、配置iscsi服务器端

这里举例子说明，假如服务器有2个分区/dev/sdb7,/dev/sdb8要共享出去:
/dev/sdb7 1230848 1640447 200M Linux filesyste
/dev/sdb8 1640448 2459647 400M Linux filesyste

安装target包：
[root@linuxidc ~]# yum install target\* -y

启动target服务
[root@linuxidc ~]# systemctl start target

配置步骤：

1、准备要共享的块；

使用targetcli命令进入target配置界面：
[root@linuxidc ~]# targetcli

/> pwd
/
/> ls
o- / .........................................................................................................................[...]
o- backstores..............................................................................................................[...]
| o- block ..................................................................................................[Storage Objects: 0]
| o- fileio.................................................................................................[Storage Objects: 0]
| o- pscsi ..................................................................................................[Storage Objects: 0]
| o- ramdisk................................................................................................[Storage Objects: 0]
o- iscsi............................................................................................................[Targets: 0]
o- loopback.........................................................................................................[Targets: 0]

进入backstores/block目录创建要共享的块，创建block1和block2：

/> cd backstores/
/backstores> ls
o- backstores................................................................................................................[...]
o- block ....................................................................................................[Storage Objects: 0]
o- fileio...................................................................................................[Storage Objects: 0]
o- pscsi ....................................................................................................[Storage Objects: 0]
o- ramdisk..................................................................................................[Storage Objects: 0]

/backstores/block> create block1 dev=/dev/sdb7
Created block storage object block1 using /dev/sdb7.
/backstores/block> create block2 dev=/dev/sdb8
Created block storage object block2 using /dev/sdb8.

/backstores/block>ls
o- block......................................................................................................[Storage Objects: 2]
o- block1..........................................................................[/dev/sdb7 (200.0MiB) write-thru deactivated]
o- block2..........................................................................[/dev/sdb8 (400.0MiB) write-thru deactivated]

exit退出保存targetcli，并重新进入：
/backstores/block> exit
Global pref auto_save_on_exit=true
Last 10 configs saved in /etc/target/backup.
Configuration saved to /etc/target/saveconfig.json
[root@linuxidc ~]# targetcli

2、创建一个target;

target标准名字格式：

年月域名倒写名字

iqn.2015-02.com.sg:disk1

进入iscsi目录，创建target:

/iscsi>create iqn.2015-02.com.sg:disk1

/iscsi> ls
o- iscsi..............................................................................................................[Targets: 1]
o- iqn.2015-02.com.sg:disk1............................................................................................[TPGs: 1]

3、在target上面创建一个lun；

进入/iscsi/iqn.2015-02.com.sg:disk1/tpg1目录：
/iscsi/iqn.20...sg:disk1/tpg1> ls
o- tpg1.....................................................................................................[no-gen-acls, no-auth]
o- acls................................................................................................................[ACLs: 0]
o- luns................................................................................................................[LUNs: 0]
o- portals..........................................................................................................[Portals: 0]

acls目录创建共享密码：
/iscsi/iqn.20...sg:disk1/tpg1> acls/ createiqn.2015-02.com.sg:diskpasswd

创建lun:
/iscsi/iqn.20...sg:disk1/tpg1> luns/ create /backstores/block/block1
Created LUN 0.
Created LUN 0->0 mapping in node ACL iqn.2015-02.com.sg:diskpasswd
/iscsi/iqn.20...sg:disk1/tpg1> luns/ create /backstores/block/block2
Created LUN 1.
Created LUN 1->1 mapping in node ACL iqn.2015-02.com.sg:diskpasswd

o-luns..........................................................................................................[LUNs: 2]
| | o- lun0.......................................................................................[block/block1 (/dev/sdb7)]
| | o- lun1.......................................................................................[block/block2 (/dev/sdb8)]

portal创建共享端口和地址：
/iscsi/iqn.20...sg:disk1/tpg1> portals/ create 10.35.89.32
Using default IP port 3260
Created network portal 10.35.89.32:3260.

exit退出并保存：

Configurationsaved to /etc/target/saveconfig.json

配置文件保存在：/etc/target/saveconfig.json，可以直接修改配置文件

三、客户端配置iscsi连接

安装target包：
[root@client ~]# yum install target\* -y

查看fuw服务器端共享的内容：
[root@client ~]# iscsiadm -m discovery -t st -p 10.35.89.32
10.35.89.32:3260,1 iqn.2015-02.com.sg:disk1

编辑/etc/iscsi/initiatorname.iscsi文件，配置服务器端共享的名字和密码：
InitiatorName=iqn.2015-02.com.sg:diskpasswd

重启iscscid服务：

[root@client~]# systemctl restart iscsid.service

挂载服务器端共享的内容：

[root@client~]# iscsiadm -m node -T iqn.2015-02.com.sg:disk1 -p 10.35.89.32 -l