第一步 下载pppoe客户端
第二步 安装pppoe客户端
拆包解压到 /usr/local/src目录
[root@CentOS ~]# tar -zxvf rp-pppoe-3.11.tar.gz -C /usr/local/src
进入/usr/local/src目录
[root@CentOS ~]# cd /usr/local/src
进入rp_pppoe-3.11目录
[root@CentOS src]# cd rp-pppoe-3.11/
查看README文件里面有安装步骤
[root@CentOS rp-pppoe-3.11]# vim README
Compile and install pppd if you don't already have it. Then:
1) Unpack:
$ tar xzvf rp-pppoe-xxx.tar.gz
2) Change to source directory:
$ cd src
3) Configure:
$ ./configure
4) Compile:
$ make
4) Install (this step must be done as root)
# make install
5) Now read doc/HOW-TO-CONNECT
--
David F. Skoll <dfs@roaringpenguin.com> | Roaring Penguin Software Inc.
http://www.roaringpenguin.com
进入rp-pppoe目录下的src目录
[root@CentOS rp-pppoe-3.11]# cd src
编译
[root@CentOS src]# ./configure
执行make
[root@CentOS src]# make
安装pppoe
[root@CentOS src]# make install
设置pppoe
[root@CentOS src]# pppoe-setup
提示设置用户名默认bxxxnxnx@sympatico.ca
注意这里说的用户是你的登录账号
[root@CentOS rp-pppoe-3.11]# pppoe-setup
Welcome to the Roaring Penguin PPPoE client setup. First, I will run
some checks on your system to make sure the PPPoE client is installed
properly...
Looks good! Now, please enter some information:
USER NAME
>>> Enter your PPPoE user name (default 15638892360):
输入用户名回车
提示选择网卡默认eth0
INTERFACE
>>> Enter the Ethernet interface connected to the DSL modem
For Solaris, this is likely to be something like /dev/hme0.
For Linux, it will be ethn, where 'n' is a number.
(default eth0):
选择按需连接还是永久在线默认永久在线
Do you want the link to come up on demand, or stay up continuously?
If you want it to come up on demand, enter the idle time in seconds
after which the link should be dropped. If you want the link to
stay up permanently, enter 'no' (two letters, lower-case.)
NOTE: Demand-activated links do not interact well with dynamic IP
addresses. You may have some problems with demand-activated links.
>>> Enter the demand value (default no):
提示让你输入你的IPS（Internet服务提供商）的主DNS 服务器地址
DNS
Please enter the IP address of your ISP's primary DNS server.
If your ISP claims that 'the server will provide DNS addresses',
enter 'server' (all lower-case) here.
If you just press enter, I will assume you know what you are
doing and not modify your DNS setup.
>>> Enter the DNS information here:
输入密码和确认密码
PASSWORD
>>> Please enter your PPPoE password:
>>> Please re-enter your PPPoE password:
配置防火墙，这里有三个级别
FIREWALLING
Please choose the firewall rules to use. Note that these rules are
very basic. You are strongly encouraged to use a more sophisticated
firewall setup; however, these will provide basic security. If you
are running any servers on your machine, you must choose 'NONE' and
set up firewalling yourself. Otherwise, the firewall rules will deny
access to all standard servers like Web, e-mail, ftp, etc. If you
are using SSH, the rules will block outgoing SSH connections which
allocate a privileged source port.
The firewall choices are:
0 - NONE: This script will not set any firewall rules. You are responsible
for ensuring the security of your machine. You are STRONGLY
recommended to use some kind of firewall rules.
1 - STANDALONE: Appropriate for a basic stand-alone web-surfing workstation
2 - MASQUERADE: Appropriate for a machine acting as an Internet gateway
for a LAN
>>> Choose a type of firewall (0-2):
配置完成后会显示的的配置，并询问是否保存
** Summary of what you entered **
Ethernet Interface: eth0
User name:
Activate-on-demand: No
DNS: Do not adjust
Firewalling: NONE
>>> Accept these settings and adjust configuration files (y/n)?
保存后会提示配置的保存位置，并提示下一步操作
Adjusting /etc/ppp/pppoe.conf
Adjusting /etc/ppp/pap-secrets and /etc/ppp/chap-secrets
(But first backing it up to /etc/ppp/pap-secrets-bak)
(But first backing it up to /etc/ppp/chap-secrets-bak)
Congratulations, it should be all set up!
Type 'pppoe-start' to bring up your PPPoE link and 'pppoe-stop' to bring
it down. Type 'pppoe-status' to see the link status.
启动pppoe
[root@CentOS src]# pppoe-start
登录成功会提示
[root@CentOS rp-pppoe-3.11]# pppoe-start
pppoe-start: There already seems to be a PPPoE connection up (PID 37234)
到此pppoe登录成功
