Installing Slic3r


Do NOT install with sudo!


How to use this document

This document is divided into sections.

Notes/instructions specific to a particlar Linux distribution are included as a subsection of the main section. So the prerequisite instructions for Ubuntu 16.04 are listed in the Installing Prerequisites section, under Ubuntu 16.04. If you do not see a section for your distribution of choice then use the general instructions (if available) or translate the information from one of the other distributions to your own.

If you want to add instructions or suggest edits to this document, please create a ​​github issue​​.


Installing prerequisites


G++ (C++ Compiler)

Slic3r requires a C++ compiler that suppports most of the C++11 spec. For GCC, this means 4.9 or newer is required (this is a hard requirement). Clang 3.3 should also work (and is used on OSX).

You should install gcc from your distribution's packages whenever able.


Perl

Slic3r works fine with Perl 5.12, 5.14, 5.18, 5.20, 5.22, 5.24: in other words all versions except for 5.16. If your distribution ships 5.16 it is recommend that you use ​​Perlbrew​​ for installing an alternative user-land perl. See below for Perlbrew-specific instructions. Some distributions have brokens perls, so using perlbrew is always a good idea.


General Libraries

Ubuntu 16.04

$ sudo apt-get install build-essential libgtk2.0-dev libwxgtk3.0-dev libwx-perl libmodule-build-perl git cpanminus libextutils-cppguess-perl libboost-all-dev libxmu-dev liblocal-lib-perl wx-common libopengl-perl libwx-glcanvas-perl libtbb-dev libxmu-dev freeglut3-dev libwxgtk-media3.0-dev libboost-thread-dev libboost-system-dev libboost-filesystem-dev libcurl4-openssl-dev

Debian 8 (Jessie)

$ sudo apt-get install -y build-essential cpanminus liblocal-lib-perl
 $ sudo apt-get build-dep slic3r
 $ sudo apt-get install -y libxmu-dev freeglut3-dev libwxgtk-media2.8-dev 
 $ sudo apt-get install libboost-thread-dev libboost-system-dev libboost-filesystem-dev

Note: depending on your version of Debian, you may need to install ​​libwxgtk-media3.0-dev​​ instead of 2.8.

Debian 7 (Wheezy) or Ubuntu 14.04 or 12.02

# For Ubuntu 14.04 gcc-4.9:
 $ sudo add-apt-repository -y ppa:ubuntu-toolchain-r/test
 $ sudo apt-get update
 $ sudo update-alternatives --install /usr/bin/gcc gcc /usr/bin/gcc-4.9 60 --slave /usr/bin/g++ g++ /usr/bin/g++-4.9

 $ sudo apt-get install -y gcc-4.9 git build-essential libgtk2.0-dev libwxgtk2.8-dev libwx-perl libmodule-build-perl libnet-dbus-perl libexpat1-dev cpanminus liblocal-lib-perl
 $ sudo apt-get install -y libxmu-dev freeglut3-dev libwxgtk-media2.8-dev
 $ sudo apt-get install libboost-thread-dev libboost-system-dev libboost-filesystem-dev libboost-all-dev libtbb-dev

Ubuntu 12.02 Special Note

Ubuntu 12.02 has versions of Boost in its repository that are too old. Add new versions from the ppa as below.

sudo add-apt-repository ppa:boost-latest/ppa
sudo apt-get update
sudo apt-get install libboost-thread1.55-dev libboost-system1.55-dev

OpenSUSE 13.2

sudo apt-get install curl
curl -L http://cpanmin.us | sudo perl - --sudo App::cpanminus

Add opensuse build service repository with Parse::PMfile

zypper ar -r http://download.opensuse.org/repositories/devel:/languages:/perl:/CPAN-P/openSUSE_13.2/devel:languages:perl:CPAN-P.repo  -n build:perl:cpan-p -f

Install required packages
zypper install git-core curl perl-Wx perl-App-cpanminus perl-ExtUtils-CppGuess perl-Moo perl-threads perl-Math-PlanePath perl-Class-Accessor perl-Parse-PMFile wxWidgets-ansi-devel libXmu-devel libXi-devel

Fedora 17

sudo yum install git curl gcc-c++ perl-Wx \
    perl-Module-Build perl-App-cpanminus perl-Moo

Fedora 18

sudo yum install git curl gcc-c++ perl-Wx \
    perl-Module-Build perl-App-cpanminus perl-Moo \
    perl-Math-PlanePath perl-Boost-Geometry-Utils perl-Math-Clipper \
    perl-Math-ConvexHull perl-Math-Geometry-Voronoi perl-parent \
    perl-Growl-GNTP perl-Class-XSAccessor perl-XML-SAX-ExpatXS \
    perl-Math-ConvexHull-MonotoneChain perl-ExtUtils-XSpp \
    perl-ExtUtils-CppGuess perl-ExtUtils-Typemaps-Default \
    perl-Capture-Tiny perl-Test-Base perl-Test-Differences \
    perl-Text-Diff perl-Module-Build-WithXSpp
$ curl -L http://cpanmin.us | sudo perl - --sudo App::cpanminus

Fedora 24/25

sudo dnf install git curl gcc-c++ boost-devel perl-Wx \
    perl-Module-Build perl-App-cpanminus perl-Moo \
    perl-Math-PlanePath perl-Boost-Geometry-Utils perl-autodie \
    perl-Math-ConvexHull perl-Math-Geometry-Voronoi perl-parent \
    perl-Growl-GNTP perl-Class-XSAccessor perl-XML-SAX-ExpatXS \
    perl-Math-ConvexHull-MonotoneChain perl-ExtUtils-XSpp \
    perl-ExtUtils-CppGuess perl-ExtUtils-Typemaps-Default \
    perl-Capture-Tiny perl-Test-Base perl-Test-Differences \
    perl-Text-Diff perl-Module-Build-WithXSpp /usr/bin/cpan
sudo cpan
$ install App::cpanminus
$ install PAR
$ install PAR::Packer
$ quit


Gentoo

Via portage:

echo "=media-gfx/slic3r-9999 **" >> /etc/portage/package.keywords/slic3r && emerge -av =media-gfx/slic3r-9999

Building by Hand:

NOTE -- letting App-cpanminus do its thing on a Gentoo Linux system has a high chance of messing up your system image! Proceed with caution.

Install ​​local::lib​​. This should let Slic3r's use of cpanm not break your system.

layman -a perl-experimental-snapshots
emerge App-cpanminus


Perlbrew

Install perlbrew (do this once per system):

$ wget -O - https://install.perlbrew.pl | bash
$ perlbrew install perl5.26.1 -Dusethreads -Duselargefiles -Dcccdlflags=-fPIC -Doptimize=-O2 --as threaded-perl-5.26.1

Follow the instructions regarding ​​source​​ Perlbrew tells you.

$ perlbrew switch threaded-perl-5.26.1

Install cpanm for perlbrew:
```` bash
$ perlbrew install-cpanm


Get Slic3r

Choose either Slic3r stable or master. master has more features, but may have more bugs, stable does not change as often.


Get Slic3r (stable)

$ git clone https://github.com/alexrj/Slic3r.git
$ cd Slic3r
$ git checkout -b origin/stable


Get Slic3r (master)

$ git clone https://github.com/alexrj/Slic3r.git
$ cd Slic3r
$ git checkout -b origin/master


Update Slic3r

​​cd​​ to the directory you cloned Slic3r to.

$ git pull


Build Slic3r

$ export LDLOADLIBS=-lstdc++
$ perl Build.PL
$ perl Build.PL --gui

Create a file in your favorite text editor, call it ​​slic3r​​ and paste the following into it:

#!/bin/sh
perl ./slic3r.pl $*

Mark it as executable with ​​chmod +x slic3r​​

Perlbrew

$ sudo CPANM=~/perl5/perlbrew/bin/cpanm perl Build.PL
$ sudo CPANM=~/perl5/perlbrew/bin/cpanm perl Build.PL --gui


Troubleshooting


CppGuess

If you get an error where CppGuess fails to build, use

export LDLOADLIBS=-lstdc++

to set that flag and then try running ​​perl Build.PL​​ again. CppGuess usually only needs to be built once, so subsequent builds of Slic3r should not require that flag.


Alternatives


Debian 8 (Jessie)

Use the fork ​​https://github.com/lordofhyphens/Slic3r​​ which is a patchset to produce a Debian package of current Slic3r.


Build Slic3r (C++)

Note: Slic3r's C++ side only supports CLI. While a GUI may be built, it is nonfunctional.


Prerequisites

  • Slic3r's C++ toolpath requires CMake 3.8 or higher.
  • Boost is still required.
  • The GUI code requires a C++14 compliant compiler (gcc-6 or clang 3.4)
  • You also need libcurl4-openssl-dev ( for the cmake configuration )


Procedure

mkdir build
cd build
cmake ../src 
cmake --build . -- -j4

There are several command switches that may be passed to cmake.

Use ​​cmake ../src -LH​​ in the build directory to display all of them.