[wuyaalan@localhost desktop]$ cd /proc/sys/vm/
[wuyaalan@localhost vm]$ ls
block_dump                 hugepages_treat_as_movable  oom_kill_allocating_task
compact_memory             hugetlb_shm_group           overcommit_memory
dirty_background_bytes     laptop_mode                 overcommit_ratio
dirty_background_ratio     legacy_va_layout            page-cluster
dirty_bytes                lowmem_reserve_ratio        panic_on_oom
dirty_expire_centisecs     max_map_count               percpu_pagelist_fraction
dirty_ratio                min_free_kbytes             scan_unevictable_pages
dirty_writeback_centisecs  mmap_min_addr               stat_interval
drop_caches                nr_hugepages                swappiness
extfrag_threshold          nr_overcommit_hugepages     vdso_enabled
extra_free_kbytes          nr_pdflush_threads          vfs_cache_pressure
highmem_is_dirtyable       oom_dump_tasks              would_have_oomkilled

从上面结果可以看出,proc文件系统给用户提供了很多内核信息帮助,使得用户可以通过修改内核参数达到提高系统性能的目的。

接下来对上面列出的部分参数含义进行解释说明。

一   block_dump      block_dump enables block I/O debugging when set to a nonzero value. If you want to find out which process caused the disk to spin up(see /proc/sys/vm/laptop_mode ), you can gather information by setting the flag.     When this flag is set, Linux reports all disk read and write operations that take place, and all block dirtyings done to files. This makes it possible to debug why a disk needs to spin up, and to increase battery life even more. The output of block_dump is written to the kernel output, and it can be retrieved using "dmesg". When you use block_dump and your kernel logging level also includes kernel debugging messages, you probably want to turn off klogd, otherwise the output of block_dump will be logged, causing disk activity that is not normally there. 

参数block_dump使块I / O调试时设置为一个非零的值。如果你想找出哪些过程引起的磁盘旋转(见/proc/sys/vm/laptop_mode),你可以通过设置标志收集信息。设置该标志后,Linux将会以文件的形式报告所有磁盘活动时的读写操作以及所有脏块。这使得它可以解释为什么一个磁盘需要旋转起来,甚至可以增加电池寿命。把block_dump输出写至内核输出,可以使用“dmesg”相关信息。当你使用block_dump和内核日志记录级别,还包括内核调试信息,你可能要关闭klogd,否则block_dump输出将被记录,导致不正常的磁盘活动有。

二  dirty_background_ratio     Contains, as a percentage of total system memory, the number of pages at which the pdflush background writeback daemon will start writing out dirty data.

参数dirty_background_ratio是当所有被更改页面总大小占工作内存超过 一定比例 时,pdflush 会开始写回工作。用户可以增加这个比例,以增加页面驻留在内存的时间。

三   dirty_expire_centisecs     This tunable is used to define when dirty data is old enough to be eligible for writeout by the pdflush daemons. It is expressed in 100'ths of a second. Data which has been dirty in memory for longer than this interval will be written out next time a pdflush daemon wakes up.

参数dirty_expire_centisecs控制一个更改过的页面经过多长时间后被认为是过期的、必须被写回的页面。

四  dirty_ratio     Contains, as a percentage of total system memory, the number of pages at which a process which is generating disk writes will itself start writing out dirty data.
五  dirty_writeback_centisecs    The pdflush writeback daemons will periodically wake up and write "old" data out to disk. This tunable expresses the interval between those wakeups, in 100'ths of a second.    Setting this to zero disables periodic writeback altogether.

参数dirty_writeback_centisecs 是在pdflash线程周期唤醒的时间间隔。也就是每过一定时间pdflsh就会将修改过得数据回写到磁盘。

六  drop_caches  Writing to this will cause the kernel to drop clean caches, dentries and inodes from memory, causing that memory to become free. To free pagecache:

  • echo 1 > /proc/sys/vm/drop_caches

To free dentries and inodes:

  • echo 2 > /proc/sys/vm/drop_caches

To free pagecache, dentries and inodes:

  • echo 3 > /proc/sys/vm/drop_caches

As this is a non-destructive operation, and dirty objects are not freeable, the user should run "sync" first in order to make sure all cached objects are freed. This tunable was added in 2.6.16.

七  hugepages_treat_as_movable When a non-zero value is written to this tunable, future allocations for the huge page pool will use ZONE_MOVABLE. Despite huge pages being non-movable, we do not introduce additional external fragmentation of note as huge pages are always the largest contiguous block we care about. Huge pages are not movable so are not allocated from ZONE_MOVABLE by default. However, as ZONE_MOVABLE will always have pages that can be migrated or reclaimed, it can be used to satisfy hugepage allocations even when the system has been running a long time. This allows an administrator to resize the hugepage pool at runtime depending on the size of ZONE_MOVABLE.

八 hugetlb_shm_group    hugetlb_shm_group contains group id that is allowed to create SysV shared memory segment using hugetlb page

九 laptop_mode    laptop_mode is a knob that controls "laptop mode". When the knob is set, any physical disk I/O (that might have caused the hard disk to spin up, see 。/proc/sys/vm/block_dump) causes Linux to flush all dirty blocks. The result of this is that after a disk has spun down, it will not be spun up anymore to write dirty blocks, because those blocks had already been written immediately after the most recent read operation. The value of the laptop_mode knob determines the time between the occurrence of disk I/O and when the flush is triggered. A sensible value for the knob is 5 seconds. Setting the knob to 0 disables laptop mode.

在“笔记本模式”下,内核更智能的使用 I/O 系统,它会尽量使磁盘处于低能耗的状态下。“笔记本模式”会将许多的 I/O 操作组织在一起,一次完成,而在每次的磁盘 I/O 之间是默认长达 10 分钟的非活动期,这样会大大减少磁盘启动的次数。为了完成这么长时间的非活动期,内核就要在一次活动期时完成尽可能多的 I/O 任务。在一次活动期间,要完成大量的预读,然后将所有的缓冲同步。

十 legacy_va_layout   If non-zero, this sysctl disables the new 32-bit mmap map layout - the kernel will use the legacy (2.4) layout for all processes

十一 lowmem_reserve_ratio Ratio of total pages to free pages for each memory zone.

十二 max_map_count   This file contains the maximum number of memory map areas a process may have. Memory map areas are used as a side-effect of calling malloc, directly by mmap and mprotect, and also when loading shared libraries. While most applications need less than a thousand maps, certain programs, particularly malloc debuggers, may consume lots of them, e.g., up to one or two maps per allocation. The default value is 65536.

十三 min_free_kbytes    This is used to force the Linux VM to keep a minimum number of kilobytes free. The VM uses this number to compute a pages_min value for each lowmem zone in the system. Each lowmem zone gets a number of reserved free pages based proportionally on its size.

十四 mmap_min_addr     This file indicates the amount of address space which a user process will be restricted from mmaping. Since kernel null dereference bugs could accidentally operate based on the information in the first couple of pages of memory userspace processes should not be allowed to write to them.    By default this value is set to 0 and no protections will be enforced by the security module. Setting this value to something like 64k will allow the vast majority of applications to work correctly and provide defense in depth against future potential kernel bugs.

十五 nr_hugepages nr_hugepages configures number of hugetlb page reserved for the system.

十六 nr_pdflush_threads The count of currently-running pdflush threads. This is a read-only value.

十七 numa_zonelist_order This sysctl is only for NUMA. 'Where the memory is allocated from' is controlled by zonelists. In non-NUMA case, a zonelist for GFP_KERNEL is ordered as following: ZONE_NORMAL -> ZONE_DMA. This means that a memory allocation request for GFP_KERNEL will get memory from ZONE_DMA only when ZONE_NORMAL is not available. In NUMA case, you can think of following 2 types of order. Assume 2 node NUMA and below is zonelist of Node(0)'s GFP_KERNEL:

(A) Node(0) ZONE_NORMAL -> Node(0) ZONE_DMA -> Node(1) ZONE_NORMAL
(B) Node(0) ZONE_NORMAL -> Node(1) ZONE_NORMAL -> Node(0) ZONE_DMA. Type(A) offers the best locality for processes on Node(0), but ZONE_DMA will be used before ZONE_NORMAL exhaustion. This increases possibility of out-of-memory (OOM) of ZONE_DMA because ZONE_DMA is tend to be small. Type(B) cannot offer the best locality but is more robust against OOM of the DMA zone. Type(A) is called as "Node" order. Type (B) is "Zone" order. "Node order" orders the zonelists by node, then by zone within each node. Specify "[Nn]ode" for node order. "Zone Order" orders the zonelists by zone type, then by node within each zone. Specify "[Zz]one" for zone order. Specify "[Dd]efault" to request automatic configuration. Autoconfiguration will select "node" order in following case:

(1) if the DMA zone does not exist or


(2) if the DMA zone comprises greater than 50% of the available memory or


(3) if any node's DMA zone comprises greater than 60% of its local memory and the amount of local memory is big enough. Otherwise, "zone" order will be selected. Default order is recommended unless this is causing problems for your system/application.

十八 overcommit_memory Controls overcommit of system memory, possibly allowing processes to allocate (but not use) more memory than is actually available.

  • 0 - Heuristic overcommit handling. Obvious overcommits of address space are refused. Used for a typical system. It ensures a seriously wild allocation fails while allowing overcommit to reduce swap usage. root is allowed to allocate slighly more memory in this mode. This is the default.
  • 1 - Always overcommit. Appropriate for some scientific applications.
  • 2 - Don't overcommit. The total address space commit for the system is not permitted to exceed swap plus a configurable percentage (default is 50) of physical RAM. Depending on the percentage you use, in most situations this means a process will not be killed while attempting to use already-allocated memory but will receive errors on memory allocation as appropriate.

十九 overcommit_ratio Percentage of physical memory size to include in overcommit calculations. Memory allocation limit = swapspace + physmem * (overcommit_ratio / 100) swapspace = total size of all swap areas


physmem = size of physical memory in system

二十  page-cluster page-cluster controls the number of pages which are written to swap in a single attempt. The swap I/O size. It is a logarithmic value - setting it to zero means "1 page", setting it to 1 means "2 pages", setting it to 2 means "4 pages", etc. The default value is three (eight pages at a time). There may be some small benefits in tuning this to a different value if your workload is swap-intensive.

二十一 panic_on_oom This enables or disables panic on out-of-memory feature. If this is set to 1, the kernel panics when out-of-memory happens. If this is set to 0, the kernel will kill some rogue process, by calling oom_kill(). Usually, oom_killer can kill rogue processes and system will survive. If you want to panic the system rather than killing rogue processes, set this to 1. The default value is 0.

二十二 percpu_pagelist_fraction This is the fraction of pages at most (high mark pcp->high) in each zone that are allocated for each per cpu page list. The min value for this is 8. It means that we don't allow more than 1/8th of pages in each zone to be allocated in any single per_cpu_pagelist. This entry only changes the value of hot per cpu pagelists. User can specify a number like 100 to allocate 1/100th of each zone to each per cpu page list. The batch value of each per cpu pagelist is also updated as a result. It is set to pcp->high / 4. The upper limit of batch is (PAGE_SHIFT * 8). The initial value is zero. Kernel does not use this value at boot time to set the high water marks for each per cpu page list.

二十三  stat_interval With this tunable you can configure VM statistics update interval. The default value is 1. This tunable first appeared in 2.6.22 kernel.

二十四  swap_token_timeout This file contains valid hold time of swap out protection token. The Linux VM has token based thrashing control mechanism and uses the token to prevent unnecessary page faults in thrashing situation. The unit of the value is second. The value would be useful to tune thrashing behavior. This tunable was removed in 2.6.20 when the algorithm got improved.

二十五  swappiness swappiness is a parameter which sets the kernel's balance between reclaiming pages from the page cache and swapping process memory. The default value is 60. If you want kernel to swap out more process memory and thus cache more file contents increase the value. Otherwise, if you would like kernel to swap less decrease it.

二十六  vdso_enabled When this flag is set, the kernel maps a vDSO page into newly created processes and passes its address down to glibc upon exec(). This feature is enabled by default. vDSO is a virtual DSO (dynamic shared object) exposed by the kernel at some address in every process' memory. It's purpose is to speed up system calls. The mapping address used to be fixed (0xffffe000), but starting with 2.6.18 it's randomized (besides the security implications, this also helps debuggers

二十七 vfs_cache_pressure Controls the tendency of the kernel to reclaim the memory which is used for caching of directory and inode objects. At the default value of vfs_cache_pressure = 100 the kernel will attempt to reclaim dentries and inodes at a "fair" rate with respect to pagecache and swapcache reclaim. Decreasing vfs_cache_pressure causes the kernel to prefer to retain dentry and inode caches. Increasing vfs_cache_pressure beyond 100 causes the kernel to prefer to reclaim dentries and inodes.