mysql8 mgr 管理

转载

mob64ca14173efa 2024-11-20 17:13:54

文章标签 mysql8 mgr 管理 mysql bootstrap 服务器 文章分类 MySQL 数据库

1，关于MySQL Group Replication

基于组的复制（Group-basedReplication）是一种被使用在容错系统中的技术。Replication-group（复制组）是由能够相互通信的多个服务器（节点）组成的。

在通信层，Groupreplication实现了一系列的机制：比如原子消息（atomicmessage delivery）和全序化消息（totalorderingof messages）。

这些原子化，抽象化的机制，为实现更先进的数据库复制方案提供了强有力的支持。

MySQL Group Replication正是基于这些技术和概念，实现了一种多主全更新的复制协议。

简而言之，一个Replication-group就是一组节点，每个节点都可以独立执行事务，而读写事务则会在于group内的其他节点进行协调之后再commit。

因此，当一个事务准备提交时，会自动在group内进行原子性的广播，告知其他节点变更了什么内容/执行了什么事务。

这种原子广播的方式，使得这个事务在每一个节点上都保持着同样顺序。

这意味着每一个节点都以同样的顺序，接收到了同样的事务日志，所以每一个节点以同样的顺序重演了这些事务日志，最终整个group保持了完全一致的状态。

然而，不同的节点上执行的事务之间有可能存在资源争用。这种现象容易出现在两个不同的并发事务上。

假设在不同的节点上有两个并发事务，更新了同一行数据，那么就会发生资源争用。

面对这种情况，GroupReplication判定先提交的事务为有效事务，会在整个group里面重演，后提交的事务会直接中断，或者回滚，最后丢弃掉。

因此，这也是一个无共享的复制方案，每一个节点都保存了完整的数据副本。看如下图片01.png，描述了具体的工作流程，能够简洁的和其他方案进行对比。这个复制方案，在某种程度上，和数据库状态机（DBSM）的Replication方法比较类似。

mysql8 mgr 管理_mysql

MGR的限制

仅支持InnoDB表，并且每张表一定要有一个主键，用于做write set的冲突检测；

必须打开GTID特性，二进制日志格式必须设置为ROW，用于选主与write set

COMMIT可能会导致失败，类似于快照事务隔离级别的失败场景

目前一个MGR集群最多支持9个节点

不支持外键于save point特性，无法做全局间的约束检测与部分部分回滚

二进制日志不支持binlog event checksum

2，安装mysql 5.7.18

在三台db服务器上面设置/etc/hosts映射，如下：

192.168.1.20 mgr1

192.168.1.21 mgr2

192.168.1.22 mgr3

安装的数据库服务器：

数据库服务器地址	端口	数据目录	Server-id
192.168.1.20（mgr1）	3306	/usr/local/mysql/data	20
192.168.1.21（mgr2）	3306	/usr/local/mysql/data	21
192.168.1.22（mgr3）	3306	/usr/local/mysql/data	22

安装过程略。。。。。

my.cnf的详细配置

mysql8 mgr 管理_bootstrap_02

[client]
port = 3306
socket = /usr/local/mysql/tmp/mysql.sock
 
[mysqld]
port = 3306
socket = /usr/local/mysql/tmp/mysql.sock
back_log = 80
basedir = /usr/local/mysql
tmpdir = /tmp
datadir = /usr/local/mysql/data
 
#-------------------gobal variables------------#
gtid_mode = ON
enforce_gtid_consistency = ON
master_info_repository = TABLE
relay_log_info_repository = TABLE
binlog_checksum = NONE
log_slave_updates = ON
log-bin = /usr/local/mysql/log/mysql-bin
transaction_write_set_extraction = XXHASH64
loose-group_replication_group_name = 'ce9be252-2b71-11e6-b8f4-00212844f856'
loose-group_replication_start_on_boot = off
loose-group_replication_local_address = '192.168.1.20:33061'
loose-group_replication_group_seeds ='192.168.1.20:33061,192.168.1.21:33061,192.168.1.22:33061'
loose-group_replication_bootstrap_group = off
max_connect_errors = 20000
max_connections = 2000
wait_timeout = 3600
interactive_timeout = 3600
net_read_timeout = 3600
net_write_timeout = 3600
table_open_cache = 1024
table_definition_cache = 1024
thread_cache_size = 512
open_files_limit = 10000
character-set-server = utf8
collation-server = utf8_bin
skip_external_locking
performance_schema = 1
user = mysql
myisam_recover_options = DEFAULT
skip-name-resolve
local_infile = 0
lower_case_table_names = 0
 
#--------------------innoDB------------#
innodb_buffer_pool_size = 2000M
innodb_data_file_path = ibdata1:200M:autoextend
innodb_flush_log_at_trx_commit = 1
innodb_io_capacity = 600
innodb_lock_wait_timeout = 120
innodb_log_buffer_size = 8M
innodb_log_file_size = 200M
innodb_log_files_in_group = 3
innodb_max_dirty_pages_pct = 85
innodb_read_io_threads = 8
innodb_write_io_threads = 8
innodb_support_xa = 1
innodb_thread_concurrency = 32
innodb_file_per_table
innodb_rollback_on_timeout
 
#------------session variables-------#
join_buffer_size = 8M
key_buffer_size = 256M
bulk_insert_buffer_size = 8M
max_heap_table_size = 96M
tmp_table_size = 96M
read_buffer_size = 8M
sort_buffer_size = 2M
max_allowed_packet = 64M
read_rnd_buffer_size = 32M
 
#------------MySQL Log----------------#
log-bin = my3306-bin
binlog_format = row
sync_binlog = 1
expire_logs_days = 15
max_binlog_cache_size = 128M
max_binlog_size = 500M
binlog_cache_size = 64k
slow_query_log
log-slow-admin-statements
log_warnings = 1
long_query_time = 0.25
 
#---------------replicate--------------#
relay-log-index = relay3306.index
relay-log = relay3306
server-id = 20
init_slave = 'set sql_mode=STRICT_ALL_TABLES'
log-slave-updates
[myisamchk]
key_buffer = 512M
sort_buffer_size = 512M
read_buffer = 8M
write_buffer = 8M
[mysqlhotcopy]
interactive-timeout
[mysqld_safe]
open-files-limit = 8192
log-error = /usr/local/mysql/log/mysqld_error.log

my.cnf

注意每个节点的server_id、loose-group_replication_local_address、loose-group_replication_group_seeds都配置成自己的相印的参数

3，创建复制环境

在mgr1/mgr2/mgr3上建立复制账号：

mysql> GRANT REPLICATION SLAVE ON *.* TO 'repl'@'192.168.%' IDENTIFIED BY 'repl';

4，安装group replication插件

在mgr1、mgr2、mgr3上依次安装group replication插件

mysql> INSTALL PLUGIN group_replication SONAME 'group_replication.so';

5，配置group replication参数

确保binlog_format是row格式。

mysql> show variables like 'binlog_format';                                               
 
 
 

   +---------------+-------+   
 
 
 

   | Variable_name | Value |   
 
 
 

   +---------------+-------+   
 
 
 

   | binlog_format | ROW   |   
 
 
 

   +---------------+-------+   
 
 
 

   1 row in set (0.00 sec)

配置文件配置

（1） mgr1上的my.cnf配置： server-id=20 transaction_write_set_extraction = XXHASH64 loose-group_replication_group_name = "ce9be252-2b71-11e6-b8f4-00212844f856" loose-group_replication_start_on_boot = off loose-group_replication_local_address = "192.168.1.20:33061" loose-group_replication_group_seeds = "192.168.1.20:33061,192.168.1.21:33061,192.168.1.22:33061" loose-group_replication_bootstrap_group = off loose-group_replication_single_primary_mode = true loose-group_replication_enforce_update_everywhere_checks = false （2）mgr2上的my.cnf配置： server-id=21 transaction_write_set_extraction = XXHASH64 loose-group_replication_group_name = "ce9be252-2b71-11e6-b8f4-00212844f856" loose-group_replication_start_on_boot = off loose-group_replication_local_address = "192.168.1.21:33061" loose-group_replication_group_seeds = "192.168.1.20:33061,192.168.1.21:33061,192.168.1.22:33061" loose-group_replication_bootstrap_group = off loose-group_replication_single_primary_mode = true loose-group_replication_enforce_update_everywhere_checks = false （3）mgr3上的my.cnf配置： server-id=22 transaction_write_set_extraction = XXHASH64 loose-group_replication_group_name = "ce9be252-2b71-11e6-b8f4-00212844f856" loose-group_replication_start_on_boot = off loose-group_replication_local_address = "192.168.1.22 :33061" loose-group_replication_group_seeds = "192.168.1.20:33061,192.168.1.21:33061,192.168.1.22:33061" loose-group_replication_bootstrap_group = off loose-group_replication_single_primary_mode = true loose-group_replication_enforce_update_everywhere_checks = false

配置完后，重启3个db上的mysql服务

6，启动mgr集群

开始构建group replication集群，通常操作命令

在mgr1、mgr2、mgr3上依次执行

mysql> CHANGE MASTER TO MASTER_USER='repl', MASTER_PASSWORD='repl' FOR CHANNEL 'group_replication_recovery';

Query OK, 0 rows affected, 2 warnings (0.02 sec)

Db1上建立基本主库master库：

# 设置group_replication_bootstrap_group为ON是为了标示以后加入集群的服务器以这台服务器为基准，以后加入的就不需要设置。

mysql> SET GLOBAL group_replication_bootstrap_group = ON;

Query OK, 0 rows affected (0.00 sec)

mysql> START GROUP_REPLICATION;

Query OK, 0 rows affected (1.03 sec)

mysql> select * from performance_schema.replication_group_members;

Db2上启动group_replication：

Db2上mysql命令行上执行启动：

mysql> set global group_replication_allow_local_disjoint_gtids_join=ON;

mysql> start group_replication;

mysql> select * from performance_schema.replication_group_members;

Db3上启动group_replication：

-- Db3命令行上执行：

mysql> set global group_replication_allow_local_disjoint_gtids_join=ON;

mysql> start group_replication;

-- 再去master库mgr1上，查看group_replication成员，会有mgr3的显示，而且已经是ONLINE了

mysql> select * from performance_schema.replication_group_members;

最后查看集群状态，都为ONLINE就表示OK：

mysql> select * from performance_schema.replication_group_members;

7，验证集群复制功能

查看那个是主节点

mysql> select variable_value from performance_schema.global_status where variable_name="group_replication_primary_member";

在master库mgr1上建立测试库mgr1，测试表t1，录入一条数据

mysql> create database mgr1;

Query OK, 1 row affected (0.00 sec)

mysql> create table mgr1.t1(id int,cn varchar(32));

Query OK, 0 rows affected (0.02 sec)

mysql> insert into t1(id,cn)values(1,'a');

ERROR 3098 (HY000): The table does notcomply with the requirements by an external plugin.

-- # 这里原因是group_replaction环境下面，表必须有主键不然不允许往里insert值。所以修改表t1，将id字段设置程主键即可。

mysql> alter table t1 add primary key(id);

mysql> insert into t1(id,cn)values(1,'a');

去mgr2/mgr3上可以看到数据已经同步过去

mysql> select * from mgr1.t1;   
 
 
 

   +----+------+   
 
 
 

   | id | cn  |   
 
 
 

   +----+------+   
 
 
 

   |  1| a    |   
 
 
 

   +----+------+   
 
 
 

   1 row in set (0.00 sec)

然后在mgr2/mgr3上执行inert操作，则拒绝，因为mgr2、mgr3为readonly

mysql> insert into t1 select 2,'b';

ERROR 1290 (HY000): The MySQL server isrunning with the --super-read-only option so it cannot execute this statement

8，问题记录

8.1问题记录一

MySQL窗口报错：

ERROR 3092 (HY000): The server is notconfigured properly to be an active member of the group. Please see moredetails on error log.

后台ERROR LOG报错：

[ERROR] Plugin group_replication reported:'This member has more executed transactions than those present in the group.Local transactions: f16f7f74-c283-11e6-ae37-fa163ee40410:1 > Grouptransactions: 3c992270-c282-11e6-93bf-fa163ee40410:1,

aaaaaa:1-5'

[ERROR]Plugin group_replication reported: 'The member contains transactions notpresent in the group. The member will now exit the group.'

[Note] Plugin group_replication reported: 'Toforce this member into the group you can use the group_replication_allow_local_disjoint_gtids_joinoption'

【解决办法】：

根据提示打开group_replication_allow_local_disjoint_gtids_join选项，mysql命令行执行：

mysql> set globalgroup_replication_allow_local_disjoint_gtids_join=ON;

再执行开启组复制：

mysql> start group_replication;

Query OK, 0 rows affected (7.89 sec)

8.2 问题记录二RECOVERING

在mgr1上查询集群组成员

mysql> SELECT * FROM performance_schema.replication_group_members;

+---------------------------+--------------------------------------+----------------------+-------------+--------------+

+---------------------------+--------------------------------------+----------------------+-------------+--------------+

+---------------------------+--------------------------------------+----------------------+-------------+--------------+

3 rows in set (0.00 sec)

【解决办法】：

看报错[ERROR] Slave I/O for channel'group_replication_recovery': error connecting to master 'repl@:3306'- retry-time: 60 retries: 1, Error_code:2005，连接master库不上，所以问题在这里，我们赋予的复制账号是ip的repl@'192.168.%'，所以还需要做一个hostname()和mgr1的ip地址192.168.1.20的映射关系。

建立hostname和ip映射

vim /etc/hosts

192.168.1.20 mgr1

192.168.1.21 mgr2

192.168.1.22 mgr3

然后在mgr2上执行如下命令后重新开启group_replication即可。

mysql> stop group_replication;

Query OK, 0 rows affected (0.02 sec)

mysql> start group_replication;

Query OK, 0 rows affected (5.68 sec)

再去master库mgr1上，查看group_replication成员，会有mgr2的显示

mysql> SELECT * FROM performance_schema.replication_group_members;