一 Nginx简介
Nginx是一款开源代码的高性能HTTP服务器和反向代理服务器,同时支持IMAP/POP3/SMTP代理服务
Nginx由内核和模块组成,完成工作是通过查找配置文件将客户端请求映射到一个location block(location是用于URL
匹配的命令),location配置的命令会启动不同模块完成工作。
Nginx模块分为核心模块,基础模块和第三方模块。
核心模块:HTTP模块、EVENT模块(事件)、MAIL模块。
基础模块:HTTP Access模块、HTTP FastCGI模块、HTTP Proxy模块、HTTP Rewrite模块。
第三方模块:HTTP Upstream Request Hash模块、Notice模块、HTTP Access Key模块。
2.性能优势
web服务器,处理静态文件、索引文件以及自动索引效率高。
代理服务器,快速高效反向代理,提升网站性能。
负载均衡器,内部支持Rails和PHP,也可支持HTTP代理服务器,对外进行服务。同时支持简单容错和利用算法进行负载均衡。
性能方面,Nginx专门为性能设计,实现注重效率。采用Poll模型,可以支持更多的并发连接,并在大并发时占用很低内存。
稳定性方面,采用分阶段资源分配技术,使CPU资源占用率低。
高可用性方面,支持热备,启动迅速。
二 Nginx编译安装,配置文件详解
1.Nginx安装
安装部署nginx所用到的安装工具和相关库
默认安装的http_rewrite_module(使用正则对请求重写)需pcre库
默认安装的httP_gzip_module(Gzip压缩)需zlib库
安装http_ssl_module(HTTPS/SLL)需openssl库
yum -y install gcc pcre pcre-devel zlib zlib-devel openssl openssl-devel
下载nginx源码包,并解压
wget http://nginx.org/download/nginx-1.10.3.tar.gz
tar -zxvf nginx-1.10.3.tar.gz
cd nginx-1.10.3
设置参数 参数具体参考《Nginx编译参数》
./configure \
–prefix=/usr/local/nginx \
–with-http_ssl_module
编译并安装
make && make install
2.Nginx配置文件(/usr/local/nginx/conf/nginx.conf)
配置文件主要由四部分组成:main(全区设置),server(主机配置),upstream(负载均衡服务器设置),和location(URL匹配特定位置设置)。
1)全局变量
Nginx的worker进程运行用户以及用户组
user nobody nobody;
Nginx开启的进程数
worker_processes 1;
worker_processes auto;
以下参数指定了哪个cpu分配给哪个进程,一般来说不用特殊指定。如果一定要设的话,用0和1指定分配方式.
这样设就是给1-4个进程分配单独的核来运行,出现第5个进程是就是随机分配了。eg:
worker_processes 4 #4核CPU
worker_cpu_affinity 0001 0010 0100 1000
定义全局错误日志定义类型,[debug|info|notice|warn|crit]
error_log logs/error.log info;
指定进程ID存储文件位置
pid logs/nginx.pid;
一个nginx进程打开的最多文件描述符数目,理论值应该是最多打开文件数(ulimit -n)与nginx进程数相除,但是nginx分配请求并不是那么均匀,所以最好与ulimit -n的值保持一致。
vim /etc/security/limits.conf
* soft nproc 65535
* hard nproc 65535
* soft nofile 65535
* hard nofile 65535
worker_rlimit_nofile 65535;
2)事件配置
events {
use [ kqueue | rtsig | epoll | /dev/poll | select | poll ]; epoll模型是Linux 2.6以上版本内核中的高性能网络I/O模型,如果跑在FreeBSD上面,就用kqueue模型。
use epoll;
每个进程可以处理的最大连接数,理论上每台nginx服务器的最大连接数为worker_processes*worker_connections。理论值:worker_rlimit_nofile/worker_processes
注意:最大客户数也由系统的可用socket连接数限制(~ 64K),所以设置不切实际的高没什么好处
worker_connections 65535;
worker工作方式:串行(一定程度降低负载,但服务器吞吐量大时,关闭使用并行方式)
multi_accept on;
}
3)http参数
文件扩展名与文件类型映射表
include mime.types;
默认文件类型
default_type application/octet-stream;
日志相关定义
log_format main ‘remoteaddr− r e m o t e a d d r − remote_user [timelocal]" t i m e l o c a l ] " request” ‘
‘status s t a t u s body_bytes_sent “$http_referer” ‘
‘”httpuseragent"" h t t p u s e r a g e n t "" http_x_forwarded_for”’;
定义日志的格式。后面定义要输出的内容。
1.remoteaddr与 r e m o t e a d d r 与 http_x_forwarded_for 用以记录客户端的ip地址;
2.$remote_user :用来记录客户端用户名称;
3.$time_local :用来记录访问时间与时区;
4.$request :用来记录请求的url与http协议;
5.$status :用来记录请求状态;
6.$body_bytes_sent :记录发送给客户端文件主体内容大小;
7.$http_referer :用来记录从那个页面链接访问过来的;
8.$http_user_agent :记录客户端浏览器的相关信息
连接日志的路径,指定的日志格式放在最后。
access_log logs/access.log main;
只记录更为严重的错误日志,减少IO压力
error_log logs/error.log crit;
关闭日志
access_log off;
默认编码
charset utf-8;
服务器名字的hash表大小
server_names_hash_bucket_size 128;
客户端请求单个文件的最大字节数
client_max_body_size 8m;
指定来自客户端请求头的hearerbuffer大小
client_header_buffer_size 32k;
指定客户端请求中较大的消息头的缓存最大数量和大小。
large_client_header_buffers 4 64k;
开启高效传输模式。
sendfile on;
防止网络阻塞
tcp_nopush on;
tcp_nodelay on;
客户端连接超时时间,单位是秒
keepalive_timeout 60;
#客户端请求头读取超时时间
client_header_timeout 10;
#设置客户端请求主体读取超时时间
client_body_timeout 10;
#响应客户端超时时间
send_timeout 10;
FastCGI相关参数是为了改善网站的性能:减少资源占用,提高访问速度。
fastcgi_connect_timeout 300;
fastcgi_send_timeout 300;
fastcgi_read_timeout 300;
fastcgi_buffer_size 64k;
fastcgi_buffers 4 64k;
fastcgi_busy_buffers_size 128k;
fastcgi_temp_file_write_size 128k;
gzip模块设置
开启gzip压缩输出
gzip on;
最小压缩文件大小
gzip_min_length 1k;
压缩缓冲区
gzip_buffers 4 16k;
压缩版本(默认1.1,前端如果是squid2.5请使用1.0)
gzip_http_version 1.0;
压缩等级 1-9 等级越高,压缩效果越好,节约宽带,但CPU消耗大
gzip_comp_level 2;
压缩类型,默认就已经包含text/html,所以下面就不用再写了,写上去也不会有问题,但是会有一个warn。
gzip_types text/plain application/x-javascript text/css application/xml;
#前端缓存服务器缓存经过压缩的页面
gzip_vary on;
4)虚拟主机基本设置
虚拟主机定义
server {
#监听端口
listen 80;
#访问域名
server_name localhost;
#编码格式,若网页格式与此不同,将被自动转码
charset koi8-r;
#虚拟主机访问日志定义
access_log logs/host.access.log main;
#对URL进行匹配
location / {
#访问路径,可相对也可绝对路径
root html;
#首页文件。以下按顺序匹配
index index.html index.htm;
}
错误信息返回页面
error_page 404 /404.html;
redirect server error pages to the static page /50x.html
#
error_page 500 502 503 504 /50x.html;
location = /50x.html {
root html;
}
访问URL以.php结尾则自动转交给127.0.0.1
proxy the PHP scripts to Apache listening on 127.0.0.1:80
#
location ~ .php$ {
proxy_pass http://127.0.0.1;
}
php脚本请求全部转发给FastCGI处理
pass the PHP scripts to FastCGI server listening on 127.0.0.1:9000
#
location ~ .php$ {
root html;
fastcgi_pass 127.0.0.1:9000;
fastcgi_index index.php;
fastcgi_param SCRIPT_FILENAME /scripts$fastcgi_script_name;
include fastcgi_params;
}
禁止访问.ht页面 (需ngx_http_access_module模块)
deny access to .htaccess files, if Apache’s document root
concurs with nginx’s one
#
location ~ /.ht {
deny all;
}
}
HTTPS虚拟主机定义
HTTPS server
#
server {
listen 443 ssl;
server_name localhost;
ssl_certificate cert.pem;
ssl_certificate_key cert.key;
ssl_session_cache shared:SSL:1m;
ssl_session_timeout 5m;
ssl_ciphers HIGH:!aNULL:!MD5;
ssl_prefer_server_ciphers on;
location / {
root html;
index index.html index.htm;
}
}
5)Nignx状态监控
Nginx运行状态,StubStatus模块获取Nginx自启动的工作状态(编译时要开启对应功能)
location /NginxStatus {
#启用StubStatus的工作访问状态
stub_status on;
# #指定StubStaus模块的访问日志文件
access_log logs/Nginxstatus.log;
# #Nginx认证机制(需Apache的htpasswd命令生成)
#auth_basic “NginxStatus”;
# #用来认证的密码文件
#auth_basic_user_file ../htpasswd;
}
访问:http://IP/NginxStatus(测试就不加密码验证相关)
6)反向代理
以下配置追加在HTTP的全局变量中
nginx跟后端服务器连接超时时间(代理连接超时)
proxy_connect_timeout 5;
后端服务器数据回传时间(代理发送超时)
proxy_send_timeout 5;
连接成功后,后端服务器响应时间(代理接收超时)
proxy_read_timeout 60;
设置代理服务器(nginx)保存用户头信息的缓冲区大小
proxy_buffer_size 16k;
proxy_buffers缓冲区,网页平均在32k以下的话,这样设置
proxy_buffers 4 32k;
高负荷下缓冲大小(proxy_buffers*2)
proxy_busy_buffers_size 64k;
设定缓存文件夹大小,大于这个值,将从upstream服务器传
proxy_temp_file_write_size 64k;
反向代理缓存目录
proxy_cache_path /data/proxy/cache levels=1:2 keys_zone=cache_one:500m inactive=1d max_size=1g;
levels=1:2 设置目录深度,第一层目录是1个字符,第2层是2个字符
keys_zone:设置web缓存名称和内存缓存空间大小
inactive:自动清除缓存文件时间。
max_size:硬盘空间最大可使用值。
指定临时缓存文件的存储路径(路径需和上面路径在同一分区)
proxy_temp_path /data/proxy/temp
服务配置
server {
侦听的80端口
listen 80;
server_name localhost;
location / {
#反向代理缓存设置命令(proxy_cache zone|off,默认关闭所以要设置)
proxy_cache cache_one;
#对不同的状态码缓存不同时间
proxy_cache_valid 200 304 12h;
#设置以什么样参数获取缓存文件名
proxy_cache_key host
h
o
s
t
uriisargs
i
s
a
r
g
s
args;
后7端的Web服务器可以通过X-Forwarded-For获取用户真实IP
proxy_set_header Host host;proxysetheaderX−Real−IP
h
o
s
t
;
p
r
o
x
y
s
e
t
h
e
a
d
e
r
X
−
R
e
a
l
−
I
P
remote_addr;
proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
代理设置
proxy_pass http://IP;
#文件过期时间控制
expires 1d;
}
#配置手动清楚缓存(实现此功能需第三方模块 ngx_cache_purge)
#http://www.123.com/2017/0316/17.html访问
http://www.123.com/purge/2017/0316/17.html清楚URL缓存
location ~ /purge(/.*) {
allow 127.0.0.1;
deny all;
proxy_cache_purge cache_one host
h
o
s
t
1isargs
i
s
a
r
g
s
args;
}
设置扩展名以.jsp、.php、.jspx结尾的动态应用程序不做缓存
location ~.*.(jsp|php|jspx)?{
proxy_set_header Host
{ proxy_set_header Host
host;
proxy_set_header X-Real-IP remoteaddr;proxysetheaderX−Forwarded−For
r
e
m
o
t
e
a
d
d
r
;
p
r
o
x
y
s
e
t
h
e
a
d
e
r
X
−
F
o
r
w
a
r
d
e
d
−
F
o
r
proxy_add_x_forwarded_for;
proxy_pass http://http://IP;
}
7)负载均衡
负载均衡服务器池
upstream my_server_pool {
#调度算法
#1.轮循(默认)(weight轮循权值)
#2.ip_hash:根据每个请求访问IP的hash结果分配。(会话保持)
#3.fair:根据后端服务器响应时间最短请求。(upstream_fair模块)
#4.url_hash:根据访问的url的hash结果分配。(需hash软件包)
#参数:
#down:表示不参与负载均衡
#backup:备份服务器
#max_fails:允许最大请求错误次数
#fail_timeout:请求失败后暂停服务时间。
server 192.168.1.109:80 weight=1 max_fails=2 fail_timeout=30;
server 192.168.1.108:80 weight=2 max_fails=2 fail_timeout=30;
}
负载均衡调用
server {
…
location / {
proxy_pass http://my_server_pool;
}
}
8)URL重写
根据不同的浏览器URL重写
if(httpuseragent Firefox)rewrite(.∗)$/firefox/$1break;if(
h
t
t
p
u
s
e
r
a
g
e
n
t
F
i
r
e
f
o
x
)
r
e
w
r
i
t
e
(
.
∗
)
$
/
f
i
r
e
f
o
x
/
$
1
b
r
e
a
k
;
i
f
(
http_user_agent ~ MSIE){
rewrite ^(.*)/msie/
/
m
s
i
e
/
1 break;
}
实现域名跳转
location / {
rewrite ^/(.*)https://web8.example.com
h
t
t
p
s
:
/
/
w
e
b
8.
e
x
a
m
p
l
e
.
c
o
m
1 permanent;
}
9)IP限制
限制IP访问
location / {
deny 192.168.0.2;
allow 192.168.0.0/24;
allow 192.168.1.1;
deny all;
}
10)Nginx相关命令
启动nginx
nginx
关闭nginx
nginx -s stop
平滑重启
kill -HUP cat /usr/local/nginx/logs/nginx.pid
11)Nginx启动脚本
!/bin/bash
chkconfig: 2345 80 90 #description:auto_run
PATH=/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/local/sbin:~/bin
export PATH
Check if user is root
if [ (id -u) != “0” ]; then
echo “Error: You must be root to run this script!\n”
exit 1
fi
NGINXDAEMON=/usr/local/nginx/sbin/nginx
PIDFILE=/usr/local/nginx/logs/nginx.pid
function_start()
{
echo -en “\033[32;49;1mStarting nginx……\n”
echo -en “\033[39;49;0m”
if [ -f
(id -u) != “0” ]; then echo “Error: You must be root to run this script!\n” exit 1 fi NGINXDAEMON=/usr/local/nginx/sbin/nginx PIDFILE=/usr/local/nginx/logs/nginx.pid function_start() { echo -en “\033[32;49;1mStarting nginx……\n” echo -en “\033[39;49;0m” if [ -f
PIDFILE ]; then
printf “Nginx is runing!\n”
exit 1
else
NGINXDAEMON
printf “Nginx is the successful start!\n”
fi
}
function_stop()
{
echo -en “\033[32;49;1mStoping nginx……\n”
echo -en “\033[39;49;0m”
if [ -f
NGINXDAEMON printf “Nginx is the successful start!\n” fi } function_stop() { echo -en “\033[32;49;1mStoping nginx……\n” echo -en “\033[39;49;0m” if [ -f
PIDFILE ]; then
kill cat $PIDFILE
printf “Nginx program is stoped\n”
else
printf “Nginx program is not runing!\n”
fi
}
function_reload()
{
echo -en “\033[32;49;1mReload nginx……\n”
echo -en “\033[39;49;0m”
function_stop function_start
}
function_restart()
{
echo -en “\033[32;49;1mRestart nginx……\n”
echo -en “\033[39;49;0m”
printf “Reload Nginx configure…\n”
$NGINXDAEMON -t
kill -HUP cat $PIDFILE
printf “Nginx program is reloding!\n”
}
function_kill()
{
killall nginx
}
function_status()
{
if ! ps -ef|grep -v grep|grep ‘nginx:’ > /dev/null 2>&1
then
printf “Nginx is down!!!\n”
else
printf “Nginx is running now!\n”
fi
}
if [ “1”=“start”];thenfunctionstartelif[“
1
”
=
“
s
t
a
r
t
”
]
;
t
h
e
n
f
u
n
c
t
i
o
n
s
t
a
r
t
e
l
i
f
[
“
1” = “stop” ]; then
function_stop
elif [ “1”=“reload”];thenfunctionreloadelif[“
1
”
=
“
r
e
l
o
a
d
”
]
;
t
h
e
n
f
u
n
c
t
i
o
n
r
e
l
o
a
d
e
l
i
f
[
“
1” = “restart” ]; then
function_restart
elif [ “1”=“kill”];thenfunctionkillelif[“
1
”
=
“
k
i
l
l
”
]
;
t
h
e
n
f
u
n
c
t
i
o
n
k
i
l
l
e
l
i
f
[
“
1” = “status” ]; then
function_status
else
echo -en “\033[32;49;1m Usage: nginx {start|stop|reload|restart|kill|status}\n”
echo -en “\033[39;49;0m”
fi