good：
http://2015.iteye.com/blog/1212802
Mac自带了svn服务端和客户端，所以我们不用再去下载了。
下面我列出配置步骤：
1： 在你的mac上创建一个目录，作为将来svn服务器的工作空间。
例如：你创建了一个目录“svnroot” （很多人想知道目录的完整路径，选中svnroot--》右键--》查看详情 如下图 : （ 注意 "位置： /wf " 字样））
那么你的本地完整路径就是 /wf/svnroot
2： 去svnroot中看一下，文件夹中现在应该是空的,在下面创建一个repository目录
3： 运行黑黑的shell终端将2中创建的 repository 指定为svn server的版本库目录
执行命令：
svnadmin create /wf/svnroot/repository
然后你在repository 中应该能看见新生成了一些文件： 如下图：
4.1: authz 修改后应该像下面这样：
### This file is an example authorization file for svnserve.
### Its format is identical to that of mod_authz_svn authorization
### files.
### As shown below each section defines authorizations for the path and
### (optional) repository specified by the section name.
### The authorizations follow. An authorization line can refer to:
### - a single user,
### - a group of users defined in a special [groups] section,
### - an alias defined in a special [aliases] section,
### - all authenticated users, using the '$authenticated' token,
### - only anonymous users, using the '$anonymous' token,
### - anyone, using the '*' wildcard.
###
### A match can be inverted by prefixing the rule with '~'. Rules can
### grant read ('r') access, read-write ('rw') access, or no access
### ('').
[aliases]
# joe = /C=XZ/ST=Dessert/L=Snake City/O=Snake Oil, Ltd./OU=Research Institute/CN=Joe Average
[groups]
monsters_group=wanfan
[/]
wangfan=rw
*=
# [/foo/bar]
# harry = rw
# &joe = r
# * =
# [repository:/baz/fuz]
# @harry_and_sally = rw
# * = r 4.2 passwd 修改后应该如下
### This file is an example password file for svnserve.
### Its format is similar to that of svnserve.conf. As shown in the
### example below it contains one section labelled [users].
### The name and password for each user follow, one account per line.
[users]
wangfan=1234567890
4.3 svnserve.conf 修改后应该如下：
### This file controls the configuration of the svnserve daemon, if you
### use it to allow access to this repository. (If you only allow
### access through http: and/or file: URLs, then this file is
### irrelevant.)
### Visit http://subversion.tigris.org/ for more information.
[general]
### These options control access to the repository for unauthenticated
### and authenticated users. Valid values are "write", "read",
### and "none". The sample settings below are the defaults.
anon-access = read
auth-access = write
### The password-db option controls the location of the password
### database file. Unless you specify a path starting with a /,
### the file's location is relative to the directory containing
### this configuration file.
### If SASL is enabled (see below), this file will NOT be used.
### Uncomment the line below to use the default password file.
password-db = passwd
### The authz-db option controls the location of the authorization
### rules for path-based access control. Unless you specify a path
### starting with a /, the file's location is relative to the the
### directory containing this file. If you don't specify an
### authz-db, no path-based access control is done.
### Uncomment the line below to use the default authorization file.
authz-db = authz
### This option specifies the authentication realm of the repository.
### If two repositories have the same authentication realm, they should
### have the same password database, and vice versa. The default realm
### is repository's uuid.
# realm = My First Repository
[sasl]
### This option specifies whether you want to use the Cyrus SASL
### library for authentication. Default is false.
### This section will be ignored if svnserve is not built with Cyrus
### SASL support; to check, run 'svnserve --version' and look for a line
### reading 'Cyrus SASL authentication is available.'
# use-sasl = true
### These options specify the desired strength of the security layer
### that you want SASL to provide. 0 means no encryption, 1 means
### integrity-checking only, values larger than 1 are correlated
### to the effective key length for encryption (e.g. 128 means 128-bit
### encryption). The values below are the defaults.
# min-encryption = 0
# max-encryption = 256
5: 启动svn服务器
输入下面的命令：
svnserve -d -r /wf/svnroot/repository
没有任何提示就说明启动成功了。
6: 在你的mac 上创建一个空的目录作为你的提交目录：（关键是本地可访问） 信息如下图：（wangfanapi 就是源代码目录）
7： 将6中创建的目录导入到版本管理仓库repository中。
shell 命令如下：
svn import /wf/svnroot/temps/
wangfanapi
/ svn://localhost/svn/
repository/wangfanapi --username wangfan --password 1234567890 -m "init import"
如果你能看见上面步骤7中的样子。。 每一行前面的 adding xxx 就表好似正在将本地文件添加到版本管理系统中。
8：检出项目： （在bash窗口下面你到任意一个目录，然后运行下面的命令就能将刚才 7 中导入的项目检出）
svn checkout svn://localhost/svn/repository/wangfanapi --username=wangfan --password=1234567890
//-------------------------------------------------后记-------------------------------
problem A 如果遇到提示 *********** 翻译过来就是 数据畸形。。。 和 JAVAHL 有关的一个东东。
answer： 把整个ecllipse 卸载了， 重新安装了ADT 和 subclipse
(注意subclipse 用的是1.6，原因是 subversion1.8 需要搭配 javahl1.7 这个我不知道是否自动更新下来的东西符合条件。
关于搭配参见： http://subclipse.tigris.org/wiki/JavaHL
)
ADT更新地址： https://dl-ssl.google.com/android/eclipse
subversion 1.6 更新地址： http://subclipse.tigris.org/update_1.6.x
problem B:
Not authorized to open root of edit operation
http://www.blogjava.net/zhouf/articles/251635.html
Subversion装了1.5.2版，乌龟SVN装的是1.5.1版本，可以通过乌龟正常访问到版本库，但当check out时却出现了"Not authorized to open root of edit operation"错误，上网搜索了一下，提供的解决版本如下：
anon-access 属性对目录权限的影响
你想将你的代码库开放给所有人访问，于是你就开放了匿名访问权限，在 svnserve.conf 文件中添加一行："anon-access=read"。可是对于部分目录，你又不希望别人看到，于是针对那些特别目录，你在 authz.conf 里面进行配置，添加了授权访问的人，并添加了"* ="标记。你认为一切OK了，可是你却发现，那个特别目录却无法访问了，总是提示"Not authorized to open root of edit operation"或者"未授权打开根进行编辑操作"。你再三检查你配置的用户名与密码，确认一切正确，还是无法解决问题
原来，Subversion 有个小 bug ，当"anon-access=read"并且某个目录有被设置上"* ="标记，则会出现上述问题。这个 bug 在当前最新版本上（v1.4）还存在
但我并没有设"*="这种访问方式，用户名、密码、目录访问都正确设置了。当把 anon-access=read 改成 anon-access=none 后，发现，真的可以正常访问了
