如果想把mysql安装得好一些,则严重推荐使用压缩包来安装,不推荐使用rpm方式。 一般情况下,现在大部分的服务器都是x86-64,少数是arm架构的。选择合适的版本,下载即可。
如果想把mysql安装得好一些,则严重推荐使用压缩包来安装,不推荐使用rpm方式。
一般情况下,现在大部分的服务器都是x86-64,少数是arm架构的。
选择合适的版本,下载即可。
本文中,使用的是 mysql-8.0.22-el7-x86_64.tar.gz (这对centos7的)
为了便于管理,个人推荐的目录
/soft/mysql/program --放myql程序文件
/soft/mysql/config --放mysql的配置文件,配置文件可以随意命名,例如my.ini,my.cnf,my.config之类都无所谓
之所以这样,是因为个人的习惯--把一类或者一个东西放在一个目录下,这样更好找,也更容易管理!除此之外,就是拥有更多的灵活性!
当然也可以直接使用默认的/etc/my.cnf 路径
下面是大概的步骤:
1.解压文件
2.写好my.cnf
3.初始化
4.启动服务,修改root密码
5.把mysql配置为服务,以便自动启动
步骤1:前置准备
1)包括下载,创建用户等等基本工作
2)了解需要新的实例要支持什么业务,满足什么特性
步骤2:写my.cnf,重点几个:
1)字符集
2)数据目录
3)端口
4)是否使用root运行(很多时候,我们就用root执行了)
5)密码验证方式
6)是否忽略大小写
7)是否关比bin_log(如果不复制,这个可以节约时间)
8)日志目录
下面是my.cnf的配置例子:
[client]
port=3318
[mysql]
no-beep
default-character-set=UTF8MB4
[mysqld]
user=root
skip-log-bin
port=3318
#不区分大小写(linux设置,windows不设置。linux必须初始化的时候设置)
lower_case_table_names=1
# 程序路径
basedir="/soft/mysql-8.0.22-el7-x86_64"
# 数据库实例根数据路径
datadir=/data/mysql
# 创建数据库和表的默认字符集
character-set-server=UTF8MB4
# 默认存储引擎
default-storage-engine=INNODB
# General and Slow logging.
log-output=FILE
slow-query-log=0
bulk_insert_buffer_size=32M
# Error 日志
log-error="mysql.err"
# 最大并发会话
max_connections=500
# 所有线程可以允许打开的表数量
table_open_cache=1200
# Maximum size for internal (in-memory) temporary tables. If a table
# grows larger than this value, it is automatically converted to disk
# based table This limitation is for a single table. There can be many
# of them.
# 内存临时表大小--如果有许多需要临时表的查询,而且这些临时表都挺大的,可以考虑设置大一些
# 当然前提,是您相对比较阔绰,可以有许多内存
tmp_table_size=32M
# How many threads we should keep in a cache for reuse. When a client
# disconnects, the client's threads are put in the cache if there aren't
# more than thread_cache_size threads from before. This greatly reduces
# the amount of thread creations needed if you have a lot of new
# connections. (Normally this doesn't give a notable performance
# improvement if you have a good thread implementation.)
thread_cache_size=10
# Size of the buffer used for doing full table scans of MyISAM tables.
# Allocated per thread, if a full scan is needed.
read_buffer_size=0
read_rnd_buffer_size=0
#*** INNODB Specific options ***
# innodb_data_home_dir=0.0
# Use this option if you have a MySQL server with InnoDB support enabled
# but you do not plan to use it. This will save memory and disk space
# and speed up some things.
# skip-innodb
# If set to 1, InnoDB will flush (fsync) the transaction logs to the
# disk at each commit, which offers full ACID behavior. If you are
# willing to compromise this safety, and you are running small
# transactions, you may set this to 0 or 2 to reduce disk I/O to the
# logs. Value 0 means that the log is only written to the log file and
# the log file flushed to disk approximately once per second. Value 2
# means the log is written to the log file at each commit, but the log
# file is only flushed to disk approximately once per second.
#谨慎修改这个参数
innodb_flush_log_at_trx_commit=1
# The size of the buffer InnoDB uses for buffering log data. As soon as
# it is full, InnoDB will have to flush it to disk. As it is flushed
# once per second anyway, it does not make sense to have it very large
# (even with long transactions).
innodb_log_buffer_size=128m
#建议开启严谨模式
innodb_strict_mode=on
#密码验证方式
default_authentication_plugin=mysql_native_password
步骤3:初始化
如果使用专有的mysql用户(用户未必叫这个,不过为了便于识别就叫mysql。如有个人爱好,喜欢叫msql,uglysql可以)启动配置(这是推荐的,前提是创建了对应用户)
bin/mysqld --defaults-file=/opt/mysql/mysql/etc/my.cnf --initialize --user=mysql
如果想用root且修改配置文件路径,则可以修改为
bin/mysqld --defaults-file=/data/mysql/config/my.cnf --initialize --user=root
步骤4:安装为服务
有时候不一定按照下面就可以安装为服务,要看系统的情况。
注意:如果修改了my.cnf的存储路径则必须修改mysql.server文件
mysql.server一般在support-files目录下
以下是一般需要修改的片段:
# If you change base dir, you must also change datadir. These may get
# overwritten by settings in the MySQL configuration files.
basedir=/soft/mysql-8.0.22-el7-x86_64
datadir=/data/mysql
复制启动文件 cp mysql.server /etc/init.d/mysqld
赋予可执行权限:# chmod +x /etc/init.d/mysqld
添加为服务:# chkconfig --add mysqld
之后可以使用 systemctl start/stop/status mysqld
也可以直接使用mysql.server start/stop等
注:使用upstart方式启动服务,并不是推荐的访问,远远不如systemd方式来得优雅。如果suport-files中没有可以参考的service,那么可以自己创建一个,
如果使用systemd的方式创建服务,网络上有很多!
这个方面redis做得比mysql好一些。
总结
一个开发环境的安装还是很容易的,前提是对于性能不需要特别优化的情况。
最后,申明下,以上的配置仅仅能够满足一般的开发,要想满足高性能的配置,远远不够。
作为一个mysql dba,必须掌握:
1)mysql 开发
2) linux配置
3) mysql 配置
4) 操作系统、网络
5)熟悉要优化的系统的业务
6)你的项目,你的团队的情况
如果认为会建立索引,会写一些复杂一点点的sql,也认为是优化,那还差太远太远了,只能贻笑大方!