keeplived lvs双主 keepalived双主双活

转载

mob64ca13f6bbea 2024-05-27 23:12:21

文章标签 keeplived lvs双主运维后端前端 ViewUI 文章分类 运维

LVS是一种集群(Cluster)技术：采用IP负载均衡技术和基于内容请求分发技术。调度器具有很好的吞吐率，将请求均衡地转移到不同的服务器上执行，且调度器自动屏蔽掉服务器的故障，从而将一组服务器构成一个高性能的、高可用的虚拟服务器。整个服务器集群的结构对客户是透明的，而且无需修改客户端和服务器端的程序。工作在四层，在内核空间工作，基于ipvs模块，不占用流量。

双机高可用方法目前分为两种：

1）双机主从模式：即前端使用两台服务器，一台主服务器和一台热备服务器，正常情况下，主服务器绑定一个公网虚拟IP，提供负载均衡服务，热备服务器处于空闲状态；当主服务器发生故障时，热备服务器接管主服务器的公网虚拟IP，提供负载均衡服务；但是热备服务器在主机器不出现故障的时候，永远处于浪费状态，对于服务器不多的网站，该方案不经济实惠。

2）双机主主模式：这种模式的效果很强大，即前端使用两台负载均衡服务器，互为主备，且都处于活动状态（这样达到不浪费服务器），同时各自绑定一个公网虚拟IP，提供负载均衡服务；当其中一台发生故障时，另一台接管发生故障服务器的公网虚拟IP（这时由非故障机器一台负担所有的请求）。这种方案，经济实惠，非常适合于当前架构环境。

keeplived lvs双主 keepalived双主双活_运维

一、环境介绍：

操作系统：

[root@CentOS-4 ~]# cat /etc/RedHat-release
CentOS release 6.9 (Final)

服务器对应关系：

KA1：192.168.5.129 centos-1
KA2：192.168.5.128 centos-4
Vip1：192.168.5.200  129master/128backup
VIP2：192.168.5.210  128master/129backup
Web1：192.168.5.131 centos-2
Web2：192.168.5.132 centos-3
Client：192.168.5.140centos-5

二、环境安装：

安装依赖：

（在KA1和KA2机器上执行以下步骤）

[root@centos-4 ~]# yum -y install gcc pcre-devel zlib-devel openssl-devel
[root@centos-4~]# cd /usr/local/src/
[root@centos-4 src]# wget http://nginx.org/download/nginx-1.9.7.tar.gz

安装nginx

[root@centos-4 src]# tar -zvxfnginx-1.9.7.tar.gz 
[root@centos-4 src]# cd nginx-1.9.7[root@centos-4 nginx-1.9.7]#./configure --prefix=/usr/local/nginx --user=nginx --group=nginx--with-http_ssl_module --with-http_flv_module --with-http_stub_status_module--with-http_gzip_static_module --with-pcre
[root@centos-4 nginx-1.9.7]# make &&make install
[root@centos-1 ~]# yum install -ykeepalived
[root@centos-1 ~]# yum install –y ipvsadm

(在web1服务器和web2服务器上安装nginx)

[root@centos-2~]# yum -y install gcc pcre-devel zlib-devel openssl-devel
[root@centos-2~]# cd /usr/local/src/
[root@centos-2 src]# wget http://nginx.org/download/nginx-1.9.7.tar.gz

安装nginx

[root@centos-2 src]# tar -zvxfnginx-1.9.7.tar.gz 
[root@centos-2 src]# cd nginx-1.9.7[root@centos-2 nginx-1.9.7]# ./configure --prefix=/usr/local/nginx --user=nginx --group=nginx--with-http_ssl_module --with-http_flv_module --with-http_stub_status_module--with-http_gzip_static_module --with-pcre
[root@centos-2 nginx-1.9.7]# make &&make install

三、配置服务：

（所以服务器上配置）

[root@centos-1 ~]# cat/etc/sysconfig/selinux
SELINUX=disabled
[root@centos-1 ~]# getenforce
Disabled
[root@centos-1 ~]# service iptables stop

1、配置keepalived：

（KA1上操作）

[root@centos-1 ~]#cat /etc/keepalived/keepalived.conf
! Configuration File forkeepalived 
 
global_defs { 
  notification_email { 
    acassen@firewall.loc 
    #failover@firewall.loc 
    #sysadmin@firewall.loc 
  } 
  router_id LVS_DEVEL 
} 
 vrrp_script chk_http_port {       
    script "/opt/check_nginx.sh" 
    interval 2                     
    weight -5                     
    fall 2                 
    rise 1                 
} 
vrrp_instance VI_1{ 
    state MASTER
    interface eth0 
    virtual_router_id 51 
    priority 100 
    advert_int 1 
    authentication { 
        auth_type PASS 
        auth_pass 1111 
    } 
    virtual_ipaddress { 
        192.168.5.200 
    } 
}
 
vrrp_instance VI_2{ 
    state BACKUP
    interface eth0
    virtual_router_id 50
    priority 90
    advert_int 1 
    authentication { 
        auth_type PASS
        auth_pass 1111 
    }
    virtual_ipaddress {
        192.168.5.210
    }
}
 
track_script {                   
  chk_http_port               
}
}
virtual_server192.168.5.200 80 {      # 定义转移ip端口80的集群服务
    delay_loop 3
    lb_algo rr
    lb_kind DR
    protocol TCP
 sorry_server 127.0.0.1 80
    real_server 192.168.5.131 80 {      # 定义集群服务包含的RS 1
        weight 1                    # 权重为1
    HTTP_GET {                  # 定义RS1的健康状态检测
        url {
          path /
          status_code 200
        }
        connect_timeout 1
        nb_get_retry 3
        delay_before_retry 1
      }
    }
    real_server 192.168.5.132 80 {      # 定义集群服务包含的RS 2
        weight 1                      # 权重为1
    HTTP_GET {                    # 定义RS2的健康状态检测
        url {
          path /
          status_code 200
        }
        connect_timeout 1
        nb_get_retry 3
        delay_before_retry 1
      }
    }
}
virtual_server 192.168.5.21080 {      # 定义转移ip端口80的集群服务
    delay_loop 3
    lb_algo rr
    lb_kind DR
    protocol TCP
 sorry_server 127.0.0.1 80
    real_server 192.168.5.131 80 {      # 定义集群服务包含的RS 1
        weight 1                    # 权重为1
    HTTP_GET {                   # 定义RS1的健康状态检测
        url {
          path /
          status_code 200
        }
        connect_timeout 1
        nb_get_retry 3
        delay_before_retry 1
      }
    }
    real_server 192.168.5.132 80 {      # 定义集群服务包含的RS 2
         weight 1                      # 权重为1
    HTTP_GET {                    # 定义RS2的健康状态检测
        url {
          path /
          status_code 200
        }
        connect_timeout 1
        nb_get_retry 3
        delay_before_retry 1
      }
    }
}
（KA2上操作）
[root@centos-2 ~]# cat/etc/keepalived/keepalived.conf
! Configuration File forkeepalived 
 
global_defs { 
  notification_email { 
    acassen@firewall.loc 
    #failover@firewall.loc 
    #sysadmin@firewall.loc 
  } 
  router_id LVS_DEVEL 
} 
 vrrp_script chk_http_port {       
    script "/opt/check_nginx.sh" 
    interval 2                     
    weight -5                     
    fall 2                 
    rise 1                 
} 
vrrp_instance VI_1{ 
    state BACKUP
    interface eth0 
    virtual_router_id 51 
    priority 100 
    advert_int 1 
    authentication { 
        auth_type PASS 
        auth_pass 1111 
    } 
    virtual_ipaddress { 
        192.168.5.200 
    } 
}
 
vrrp_instance VI_2{ 
    state MASTER
    interface eth0
    virtual_router_id 50
    priority 90
    advert_int 1 
    authentication { 
        auth_type PASS
        auth_pass 1111 
    }
    virtual_ipaddress {
        192.168.5.210
    }
}
 
track_script {                   
  chk_http_port               
}
}
virtual_server192.168.5.200 80 {      # 定义转移ip端口80的集群服务
    delay_loop 3
    lb_algo rr
    lb_kind DR
    protocol TCP
 sorry_server 127.0.0.1 80
    real_server 192.168.5.131 80 {      # 定义集群服务包含的RS 1
        weight 1                    # 权重为1
    HTTP_GET {                  # 定义RS1的健康状态检测
        url {
          path /
          status_code 200
        }
        connect_timeout 1
         nb_get_retry 3
        delay_before_retry 1
      }
    }
    real_server 192.168.5.132 80 {      # 定义集群服务包含的RS 2
        weight 1                      # 权重为1
    HTTP_GET {                    # 定义RS2的健康状态检测
        url {
          path /
          status_code 200
        }
        connect_timeout 1
        nb_get_retry 3
        delay_before_retry 1
      }
    }
}
virtual_server192.168.5.210 80 {      # 定义转移ip端口80的集群服务
    delay_loop 3
    lb_algo rr
    lb_kind DR
    protocol TCP
 sorry_server 127.0.0.1 80
    real_server 192.168.5.131 80 {      # 定义集群服务包含的RS 1
        weight 1                    # 权重为1
    HTTP_GET {                  # 定义RS1的健康状态检测
        url {
          path /
          status_code 200
        }
         connect_timeout 1
        nb_get_retry 3
        delay_before_retry 1
      }
    }
    real_server 192.168.5.132 80 {      # 定义集群服务包含的RS 2
        weight 1                      # 权重为1
    HTTP_GET {                    # 定义RS2的健康状态检测
        url {
           path /
          status_code 200
        }
        connect_timeout 1
        nb_get_retry 3
        delay_before_retry 1
      }
    }
}

编写一个监控nginx的脚本：

需要注意的是，要判断本机nginx是否正常，如果发现nginx不正常，重启之后，等待三秒在校验，任然失败则不尝试，关闭keepalived，发送邮件，其他主机此时接管VIP；

[root@centos-4~]# cat /opt/check_nginx.sh
#!/bin/bash
check=$(ps-C nginx --no-heading | wc -l)
IP=`ipadd | grep eth0 | awk  'NR==2{print $2}'| awk -F '/' '{print $1}'`
if ["${check}" = "0" ]; then
    /usr/local/nginx/sbin/nginx
    sleep 2
    counter=$(ps -C nginx --no-heading|wc -l)
    if [ "${check}" = "0"]; then
        /etc/init.d/keepalived stop
      echo "check $IP nginx is down"| mail -s "check keepalived nginx" *********@qq.com
    fi
fi
(KA1一样的监控脚本)

2、在后端两台web服务器上配置vip默认路由和配置两台服务器的nginx（这就不演示怎样配置nginx了。）：

(考虑到方便执行就编写了一个脚本：在web1和web2服务器上配置。)

[root@centos-2 ~]# cat lvs.sh
#!/bin/bash
#realserver config vip config route arp
#legehappy
Vip1=192.168.5.200
Vip2=192.168.5.210
source /etc/rc.d/init.d/functions
case $1 in
start)
        echo"config vip route arp" > /tmp/lvs1.txt
        /sbin/ifconfiglo:0 $Vip1 broadcast $Vip1 netmask 255.255.255.255 up
        /sbin/ifconfiglo:1 $Vip2 broadcast $Vip2 netmask 255.255.255.255 up
 
        echo"1" > /proc/sys/net/ipv4/conf/lo/arp_ignore
        echo"2" > /proc/sys/net/ipv4/conf/lo/arp_announce
        echo"1" > /proc/sys/net/ipv4/conf/all/arp_ignore
        echo"2" > /proc/sys/net/ipv4/conf/all/arp_announce
      routeadd -host $Vip1 dev lo:0
      routeadd -host $Vip2 dev lo:1
;;
stop)
        echo "deletevip route arp" > /tmp/lvs2.txt
       /sbin/ifconfig lo:0 down
        echo"0" > /proc/sys/net/ipv4/conf/lo/arp_ignore
        echo"0" > /proc/sys/net/ipv4/conf/lo/arp_announce
        echo"0" > /proc/sys/net/ipv4/conf/all/arp_ignore
        echo"0" > /proc/sys/net/ipv4/conf/all/arp_announce
      routedel -host $Vip1 dev lo:0
      routedel -host $Vip2 dev lo:1
 
;;
*)
        echo"Usage: $0 (start | stop)"
exit 1
esac
（两台后端配置web服务nginx的页面信息）
[root@centos-2 ~]# curl 192.168.5.131
10.2
[root@centos-3 ~]# curl 192.168.5.132
10.3

3、在两台前端服务器上启动keepalived服务，对于192.168.5.200的vip centos-1是master/192.168.5.210的vip centos-1是backup。

[root@centos-1 ~]#service keepalived start
[root@centos-4 ~]# service keepalived start

查看日志文件：

[root@centos-1 ~]# cat /var/log/messages
Oct 19 22:00:22 centos-1 Keepalived_vrrp[46184]: VRRP_Instance(VI_2)Sending gratuitous ARPs on eth0 for 192.168.5.210
Oct 19 22:00:22 centos-1 Keepalived_healthcheckers[46183]: Netlinkreflector reports IP 192.168.5.210 added
Oct 19 22:00:24 centos-1 Keepalived_vrrp[46184]: VRRP_Instance(VI_1)Sending gratuitous ARPs on eth0 for 192.168.5.200
Oct 19 22:00:27 centos-1 Keepalived_vrrp[46184]: VRRP_Instance(VI_2)Sending gratuitous ARPs on eth0 for 192.168.5.210
（因为KA1先启动keepalived服务所以两个vip都会在KA1上，但第二台keepaliver服务起来后vip2就会被KA2抢占回来。）
[root@centos-4 ~]# cat /var/log/messages
Oct 19 22:01:38 centos-4 Keepalived_healthcheckers[15009]: Netlinkreflector reports IP 192.168.5.210 added
Oct 19 22:01:38 centos-4 avahi-daemon[1513]: Registering new addressrecord for 192.168.5.210 on eth0.IPv4.
Oct 19 22:01:38 centos-4 Keepalived_vrrp[15010]: VRRP_Instance(VI_2)Sending gratuitous ARPs on eth0 for 192.168.5.210
Oct 19 22:01:43 centos-4 Keepalived_vrrp[15010]: VRRP_Instance(VI_2)Sending gratuitous ARPs on eth0 for 192.168.5.210

查看ip addr：

[root@centos-1 keepalived]# ip add
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdiscpfifo_fast state UP qlen 1000
    link/ether00:0c:29:0d:f3:5d brd ff:ff:ff:ff:ff:ff
    inet 192.168.5.129/24 brd192.168.5.255 scope global eth0
    inet 192.168.5.200/32scope global eth0
 
 [root@centos-4 keepalived]#ip addr
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdiscpfifo_fast state UP qlen 1000
    link/ether00:50:56:3a:84:30 brd ff:ff:ff:ff:ff:ff
    inet 192.168.5.128/24 brd192.168.5.255 scope global eth0
        inet 192.168.5.210/32 scope global eth0
（两台KA1和KA2服务器重启nginx、keepalived服务）
[root@centos-1~]# /usr/local/nginx/sbin/nginx -t
nginx:the configuration file /usr/local/nginx/conf/nginx.conf syntax is ok
nginx:configuration file /usr/local/nginx/conf/nginx.conf test is successful ###检查配置文件没问题后再执行重启nginx。
[root@centos-1~]# /usr/local/nginx/sbin/nginx -s reload
 
[root@centos-4~]# /usr/local/nginx/sbin/nginx -t
nginx:the configuration file /usr/local/nginx/conf/nginx.conf syntax is ok
nginx:configuration file /usr/local/nginx/conf/nginx.conf test is successful
[root@centos-4~]# /usr/local/nginx/sbin/nginx -s reload
[root@centos-1~]# service keepalived restart
停止keepalived：                                          [确定]
正在启动keepalived：                                      [确定]
[root@centos-4~]# service keepalived restart
停止keepalived：                                         [确定]
正在启动keepalived：                                      [确定]

四、测试：

验证方法（保证从负载均衡器本机到后端真实服务器之间能正常通信）：

（1）、先测试完成后的效果访问vip1、vip2

Vip1：
[root@centos-5~]# curl 192.168.5.200
10.2
[root@centos-5~]# curl 192.168.5.200
10.3
[root@centos-5~]# curl 192.168.5.200
10.2
[root@centos-5~]# curl 192.168.5.200
10.3
Vip2：
[root@centos-5~]# curl 192.168.5.210
10.3
[root@centos-5~]# curl 192.168.5.210
10.2
[root@centos-5~]# curl 192.168.5.210
10.3
[root@centos-5~]# curl 192.168.5.210
10.2

（2）、把KA1keepalived stop掉（模拟KA1主机的keepalived故障）

[root@centos-1 ~]# service keepalived stop
停止 keepalived：
[root@centos-1 ~]# ip addr
2: eth0:<BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen1000
   link/ether 00:0c:29:0d:f3:5d brd ff:ff:ff:ff:ff:ff
   inet 192.168.5.129/24 brd 192.168.5.255 scope global eth0
   inet6 fe80::20c:29ff:fe0d:f35d/64 scope link
      valid_lft forever preferred_lft forever

（KA1主机上查看ip addr已经没有vip了。）

在KA2主机上查看日志文件：

[root@centos-4 ~]# cat /var/log/messages
Oct 19 23:20:46 centos-4Keepalived_vrrp[15412]: VRRP_Instance(VI_1) Sending gratuitous ARPs on eth0 for192.168.5.200
Oct 19 23:20:46 centos-4avahi-daemon[1513]: Registering new address record for 192.168.5.200 oneth0.IPv4.
Oct 19 23:20:46 centos-4Keepalived_healthcheckers[15411]: Netlink reflector reports IP 192.168.5.200added
Oct 19 23:20:51 centos-4Keepalived_vrrp[15412]: VRRP_Instance(VI_1) Sending gratuitous ARPs on eth0 for192.168.5.200

（日志文件显示已经把vip：192.168.5.200接管了）

查看KA2主机的ip addr

[root@centos-4 ~]# ip addr
2: eth0:<BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen1000
   link/ether 00:50:56:3a:84:30 brd ff:ff:ff:ff:ff:ff
   inet 192.168.5.128/24 brd 192.168.5.255 scope global eth0
   inet 192.168.5.210/32 scope global eth0
   inet 192.168.5.200/32 scope global eth0

（可以看到已经有两个vip）

检查nginx服务是否被KA2接管且不中断

[root@centos-5~]# curl 192.168.5.200
10.3
[root@centos-5~]# curl 192.168.5.200
10.2
[root@centos-5~]# curl 192.168.5.210
10.3
[root@centos-5~]# curl 192.168.5.210
10.2

本文章为转载内容，我们尊重原作者对文章享有的著作权。如有内容错误或侵权问题，欢迎原作者联系我们进行内容更正或删除文章。