Openstack（Icehouse）
由于创建实例时无法动态获取IP，可能是之前的neutron配置有误。由于时间原因，暂时只能搁下OpenStack实验。下面还差一个cinder（可持续化存储没有做）
一、控制节点（Controller）
master1作为控制节点、master2作为计算节点、master3作为网络节点
1、环境准备
1.0 openstack镜像源
建议选择较新版本实验，并根据官方文档进行配置。各版本配置方法都有区别。。。
https://repos.fedorapeople.org/repos/openstack/
旧版本：
https://repos.fedorapeople.org/repos/openstack/EOL/
如果一定要实验旧版本，建议检测较旧的镜像源和CD镜像源配合：
http://vault.centos.org/1.1 环境准备
将master1（控制节点）硬件内存调整至2G以上，准备两块网卡，eth0作为内部通信，eth1外网通信；
将master2（计算节点）cpu开启虚拟化功能，内存调整至2G以上。准备两块网卡，eth0作为内部通信，eth1与网络节点做GRE隧道；
将master3（网络节点）准备三块网卡，eth0作为内部通信，eth1与计算节点做GRE隧道，eth1外网通信；
记得要在所有节点网卡配置加上
NM_CONTROLLED='no'
所有节点停止NetworkManager
[root@master1 ~]# systemctl stop NetworkManager
[root@master1 ~]# systemctl disable NetworkManager
为了实验方便，清空所有防火墙规则
# iptables -F所有节点配置主机名，并修改主机名：
[root@master1 ~]# vim /etc/hosts
127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4
::1 localhost localhost.localdomain localhost6 localhost6.localdomain6
192.168.1.1 controller.com controller
192.168.1.2 compute1.com compute1
192.168.1.3 network1.com network1
[root@master1 ~]# scp /etc/hosts root@192.168.1.2:/etc/
[root@master1 ~]# scp /etc/hosts root@192.168.1.3:/etc/
[root@master1 ~]# hostnamectl set-hostname controller.com
[root@master2 ~]# hostnamectl set-hostname compute1.com
[root@master3 ~]# hostnamectl set-hostname network1.com1.3 master1配置nat转发规则（为了让master2能够访问外网）
删除firewalld
[root@master1 ~]# systemctl stop firewalld
[root@master1 ~]# systemctl disable firewalld
[root@master1 ~]# systemctl mask firewalld
安装启动iptables
[root@master1 ~]# yum install iptables iptables-services
[root@master1 ~]# systemctl start iptables.service
清楚默认规则
[root@master1 ~]# iptables -F
配置nat：
[root@master1 ~]# iptables -t nat -A POSTROUTING -s 192.168.1.0/24 ! -d 192.168.1.0/24 -j SNAT --to-source 10.201.106.131
查看nat规则：
[root@master1 ~]# iptables -L -n -t nat
master1开启路由转发
[root@master1 ~]# vim /etc/sysctl.conf
net.ipv4.ip_forward = 1
立即生效：
[root@master1 ~]# sysctl -p
net.ipv4.ip_forward = 1
master2配置默认网关地址为master1的eth0地址后可以访问外网：
[root@master2 ~]# route add default gw 192.168.1.11.4 各节点重名后对应
hostnamectl改完主机名后需要退出重新登录生效
master1=controller
master2=compute1
master3=network11.5 master1安装MariaDB
master1安装MariaDB：
[root@master1 ~]# yum install mariadb-server
创建数据库目录：
[root@controller ~]# mkdir -pv /mydata/data
目录授权：
[root@controller ~]# chown -R mysql:mysql /mydata/data/
配置
[root@controller ~]# vim /etc/my.cnf
[mysqld]
datadir=/mydata/data
default-storage-engine = innodb
character-set-server = utf8
innodb_file_per_table = on
skip_name_resolve = on
[mysql]
default-character-set=utf8
启动
[root@master1 ~]# systemctl start mariadb
设置密码：
MariaDB [(none)]> GRANT ALL ON *.* TO 'root'@'%' IDENTIFIED BY '设置密码' WITH GRANT OPTION;
MariaDB [(none)]> GRANT ALL ON *.* TO 'root'@'%' IDENTIFIED BY '设置密码密码' WITH GRANT OPTION;
刷新权限表：
MariaDB [(none)]> FLUSH PRIVILEGES;2、Keystone
2.1 导入镜像源
icehouse地址
https://repos.fedorapeople.org/repos/openstack/EOL/openstack-icehouse/epel-7/
[root@zz ~]# vim /etc/yum.repos.d/rdo-release.repo
[openstack-I]
name=OpenStack I Repository
baseurl=https://repos.fedorapeople.org/repos/openstack/EOL/openstack-icehouse/epel-7/
gpgcheck=0
enabled=1
# yum clean all
# yum repolist
安装
[root@controller ~]# yum install openstack-keystone python-keystoneclient openstack-utils2.2 mysql创建keystone的数据库，并授权访问
创建数据库：
MariaDB [(none)]> CREATE DATABASE keystone;
授权：
MariaDB [(none)]> GRANT ALL ON keystone.* to 'keystone'@'%' IDENTIFIED BY '设置密码';
MariaDB [(none)]> GRANT ALL ON keystone.* to 'keystone'@'localhost' IDENTIFIED BY '设置密码';
刷新授权表：
MariaDB [(none)]> FLUSH PRIVILEGES;
初始化同步keystone数据库：
[root@controller ~]# su -s /bin/sh -c 'keystone-manage db_sync' keystone
查看数据库：
MariaDB [keystone]> SHOW DATABASES;
MariaDB [keystone]> USE keystone；
MariaDB [keystone]> SHOW tables;
配置：
[root@controller ~]# vim /etc/keystone/keystone.conf
[database]
connection=mysql://keystone:keystone@192.168.1.1/keystone2.3 keystone其他初始化配置
定义存放token值的变量
[root@controller ~]# ADMIN_TOKEN=$(openssl rand -hex 10)
保存值到文件
[root@controller ~]# echo $ADMIN_TOKEN
2506715b010f7e9ea0e0
[root@controller ~]# echo $ADMIN_TOKEN > .admin_toekn.rc
配置：
[root@controller ~]# vim /etc/keystone/keystone.conf
[DEFAULT]
admin_token=2506715b010f7e9ea0e0
设置本地PKI（证书）：
[root@controller ~]# keystone-manage pki_setup --keystone-user keystone --keystone-group keystone
修改PKI目录权限：
[root@controller ~]# chown -R keystone:keystone /etc/keystone/ssl/
[root@controller ~]# chmod -R o-rwx /etc/keystone/ssl/
启动keystone服务：
[root@controller ~]# systemctl enable openstack-keystone
[root@controller ~]# systemctl start openstack-keystone
定义keystone的TOEKN变量，用于命令执行TOKEN（令牌）验证，有了这个变量，敲keystone命令时，默认不用加--os-toekn参数：
[root@controller ~]# export OS_SERVICE_TOKEN=$ADMIN_TOKEN
[root@controller ~]# echo $OS_SERVICE_TOKEN
2506715b010f7e9ea0e0
[root@controller ~]# export OS_SERVICE_ENDPOINT=http://controller:35357/v2.0
列出用户（不用加--os-toekn参数也可执行）
[root@controller ~]# keystone --os-token $ADMIN_TOKEN user-list
[root@controller ~]# keystone user-list
[root@controller ~]#2.5 创建管理员用户
查看keystone命令帮助：
[root@controller ~]# keystone help
[root@controller ~]# keystone help create-user
[root@controller ~]# keystone help role-create
[root@controller ~]# keystone help user-role-add
创建管理用户：
[root@controller ~]# keystone user-create --name=admin --pass=admin --email=admin@qq.com
+----------+----------------------------------+
| Property | Value |
+----------+----------------------------------+
| email | admin@qq.com |
| enabled | True |
| id | 032b9e8e5722495c9a71c413fcb70e6e |
| name | admin |
| username | admin |
+----------+----------------------------------+
列出用户：
[root@controller ~]# keystone user-list
+----------------------------------+-------+---------+--------------+
| id | name | enabled | email |
+----------------------------------+-------+---------+--------------+
| 032b9e8e5722495c9a71c413fcb70e6e | admin | True | admin@qq.com |
+----------------------------------+-------+---------+--------------+
创建拥有管理权限的角色：
[root@controller ~]# keystone role-create --name=admin
+----------+----------------------------------+
| Property | Value |
+----------+----------------------------------+
| id | 2b54b14daca041c2a3dc66325f5048ce |
| name | admin |
+----------+----------------------------------+
查看角色：
[root@controller ~]# keystone role-list
+----------------------------------+----------+
| id | name |
+----------------------------------+----------+
| 9fe2ff9ee4384b1894a90878d3e92bab | _member_ |
| 2b54b14daca041c2a3dc66325f5048ce | admin |
+----------------------------------+----------+
创建租户（租客）
[root@controller ~]# keystone tenant-create --name=admin --description="Admin Tenant"
+-------------+----------------------------------+
| Property | Value |
+-------------+----------------------------------+
| description | Admin Tenant |
| enabled | True |
| id | abfe5df994e54c6190e98e3f3f3dab38 |
| name | admin |
+-------------+----------------------------------+
把刚才创建的admin用户添加到admin角色，并放到admin租户上。
[root@controller ~]# keystone user-role-add --user admin --role admin --tenant admin
把admin用户添加到_member_角色（可以WEB_GUI访问）
[root@controller ~]# keystone user-role-add --user admin --role _member_ --tenant admin
查看用户拥有的角色：
[root@controller ~]# keystone user-role-list --user admin --tenant admin
+----------------------------------+----------+----------------------------------+----------------------------------+
| id | name | user_id | tenant_id |
+----------------------------------+----------+----------------------------------+----------------------------------+
| 9fe2ff9ee4384b1894a90878d3e92bab | _member_ | 032b9e8e5722495c9a71c413fcb70e6e | abfe5df994e54c6190e98e3f3f3dab38 |
| 2b54b14daca041c2a3dc66325f5048ce | admin | 032b9e8e5722495c9a71c413fcb70e6e | abfe5df994e54c6190e98e3f3f3dab38 |
+----------------------------------+----------+----------------------------------+----------------------------------+2.6 创建普通用户
[root@controller ~]# keystone user-create --name=demo --pass=demo --email=demo@qq.com
+----------+----------------------------------+
| Property | Value |
+----------+----------------------------------+
| email | demo@qq.com |
| enabled | True |
| id | 472d9776f8984bb99a728985760ad5ba |
| name | demo |
| username | demo |
+----------+----------------------------------+
创建测试租户：
[root@controller ~]# keystone tenant-create --name=demo --description="Demo Tenant"
+-------------+----------------------------------+
| Property | Value |
+-------------+----------------------------------+
| description | Demo Tenant |
| enabled | True |
| id | fbff77c905114d50b5be94ffd46203cd |
| name | demo |
+-------------+----------------------------------+
将用户放入_member_角色：
[root@controller ~]# keystone user-role-add --user=demo --role=_member_ --tenant=demo
查看用户属于什么角色：
[root@controller ~]# keystone user-role-list --tenant=demo --user=demo
+----------------------------------+----------+----------------------------------+----------------------------------+
| id | name | user_id | tenant_id |
+----------------------------------+----------+----------------------------------+----------------------------------+
| 9fe2ff9ee4384b1894a90878d3e92bab | _member_ | 472d9776f8984bb99a728985760ad5ba | fbff77c905114d50b5be94ffd46203cd |
+----------------------------------+----------+----------------------------------+----------------------------------+2.7 创建service租户（后面安装的服务添加到里面，作为容器管理）
基本容器，存放内部服务。
[root@controller ~]# keystone tenant-create --name=service --description="Service Teant"
+-------------+----------------------------------+
| Property | Value |
+-------------+----------------------------------+
| description | Service Teant |
| enabled | True |
| id | f9f13bac5d6f40449b2e4560ab16536d |
| name | service |
+-------------+----------------------------------+2.8 定义服务访问端点
相关命令帮助：
[root@controller ~]# keystone help service-create
把keystone添加到服务目录里面：
[root@controller ~]# keystone service-create --name=keystone --type=identity --description="OpenStack Identity"
+-------------+----------------------------------+
| Property | Value |
+-------------+----------------------------------+
| description | OpenStack Identity |
| enabled | True |
| id | 882370ee97724a5a93dbde574b3f9dd9 |
| name | keystone |
| type | identity |
+-------------+----------------------------------+
列出现在所有的服务：
[root@controller ~]# keystone service-list
+----------------------------------+----------+----------+--------------------+
| id | name | type | description |
+----------------------------------+----------+----------+--------------------+
| 882370ee97724a5a93dbde574b3f9dd9 | keystone | identity | OpenStack Identity |
+----------------------------------+----------+----------+--------------------+
[root@controller ~]# keystone service-list | grep -i keystone | awk '{print $2}'
882370ee97724a5a93dbde574b3f9dd9
创建keystone的访问端点：
[root@controller ~]# keystone endpoint-create --service-id=$(keystone service-list | awk '/identity/ {print $2}') \
> --publicurl=http://controller:5000/v2.0 \
> --internalurl=http://controller:5000/v2.0 \
> --adminurl=http://controller:35357/v2.0
+-------------+----------------------------------+
| Property | Value |
+-------------+----------------------------------+
| adminurl | http://controller:35357/v2.0 |
| id | d85844bf91274283bc15e97a16cde9be |
| internalurl | http://controller:5000/v2.0 |
| publicurl | http://controller:5000/v2.0 |
| region | regionOne |
| service_id | 882370ee97724a5a93dbde574b3f9dd9 |
+-------------+----------------------------------+
[root@controller ~]#
查看端点信息：
[root@controller ~]# keystone endpoint-list
+----------------------------------+-----------+-----------------------------+-----------------------------+------------------------------+----------------------------------+
| id | region | publicurl | internalurl | adminurl | service_id |
+----------------------------------+-----------+-----------------------------+-----------------------------+------------------------------+----------------------------------+
| d85844bf91274283bc15e97a16cde9be | regionOne | http://controller:5000/v2.0 | http://controller:5000/v2.0 | http://controller:35357/v2.0 | 882370ee97724a5a93dbde574b3f9dd9 |
+----------------------------------+-----------+-----------------------------+-----------------------------+------------------------------+----------------------------------+
[root@controller ~]#
如果服务定义错误，可以删除，重建：
[root@controller ~]# keystone help | grep delete
ec2-credentials-delete
endpoint-delete Delete a service endpoint.
role-delete Delete role.
service-delete Delete service from Service Catalog.
tenant-delete Delete tenant.
user-delete Delete user.
日志查看：
[root@controller ~]# tail -50 /var/log/keystone/keystone.log2.9 修改认证方式，使用用户密码操作
取消TOKEN变量：
[root@controller ~]# unset OS_SERVICE_TOKEN OS_SERVICE_ENDPOINT
使用用户密码访问测试：
[root@controller ~]# keystone --os-username=admin --os-password=admin --os-auth-url=http://controller:35357/v2.0 token-get能够获取信息：
声明用户密码方式的环境变量：
[root@controller ~]# vim ~/.admin-openrc.sh
export OS_USERNAME=admin
export OS_PASSWORD=admin
export OS_TENANT_NAME=admin
export OS_AUTH_URL=http://controller:35357/v2.0
[root@controller ~]# source ~/.admin-openrc.sh
再次测试，不用加用户密码参数，直接敲命令成功得到结果：
[root@controller ~]# keystone user-list
+----------------------------------+-------+---------+--------------+
| id | name | enabled | email |
+----------------------------------+-------+---------+--------------+
| 032b9e8e5722495c9a71c413fcb70e6e | admin | True | admin@qq.com |
| 472d9776f8984bb99a728985760ad5ba | demo | True | demo@qq.com |
+----------------------------------+-------+---------+--------------+3、glance
####（Image Service，存放元数据，用于在OpenStack中注册、发现、及获取 VM映像文件） ####
3.1 安装glance程序包
[root@controller ~]# yum install openstack-glance python-glanceclient
查看其生成文件：
[root@controller ~]# rpm -ql openstack-glance3.2 数据库配置
设置数据库本地连接，不需要密钥：
[root@controller ~]# vim .my.cnf
[mysql]
user=root
password=密码
host=localhost创建数据库：
MariaDB [(none)]> CREATE DATABASE glance CHARACTER SET utf8;
授权：
MariaDB [(none)]> GRANT ALL ON glance.* TO 'glance'@'%' IDENTIFIED BY 'glance';
MariaDB [(none)]> GRANT ALL ON glance.* TO 'glance'@'localhost' IDENTIFIED BY 'glance';
MariaDB [(none)]> FLUSH PRIVILEGES;
数据库同步初始化：
[root@controller ~]# su -s /bin/sh -c "glance-manage db_sync" glance
查看：
MariaDB [(none)]> USE glance;
MariaDB [glance]> SHOW TABLES;
+------------------+
| Tables_in_glance |
+------------------+
| image_locations |
| image_members |
| image_properties |
…………3.3 编辑配置文件
先做个备份：
[root@controller ~]# cd /etc/glance/
[root@controller glance]# cp glance-api.conf{,.bak}
[root@controller glance]# cp glance-registry.conf{,.bak}
api配置：
[root@controller ~]# vim /etc/glance/glance-api.conf
[database]
connection=mysql://glance:glance@192.168.1.1/glance
registry配置：
[root@controller ~]# vim /etc/glance/glance-registry.conf
[database]
connection=mysql://glance:glance@192.168.1.1/glance
可以查看日志有没有报错：
[root@controller ~]# tail -50 /var/log/glance/api.log3.4 在keystone添加glance用户
[root@controller ~]# keystone user-create --name=glance --pass=glance --email=glance@qq.com
+----------+----------------------------------+
| Property | Value |
+----------+----------------------------------+
| email | glance@qq.com |
| enabled | True |
| id | 232d3bfe23334050aa87bc4d7c6d491d |
| name | glance |
| username | glance |
+----------+----------------------------------+
将glance用户放在service租户，admin角色里面：
[root@controller ~]# keystone user-role-add --user=glance --tenant=service --role=admin
查看：
[root@controller ~]# keystone user-role-list --user=glance --tenant=service
+----------------------------------+-------+----------------------------------+----------------------------------+
| id | name | user_id | tenant_id |
+----------------------------------+-------+----------------------------------+----------------------------------+
| 2b54b14daca041c2a3dc66325f5048ce | admin | 232d3bfe23334050aa87bc4d7c6d491d | f9f13bac5d6f40449b2e4560ab16536d |
+----------------------------------+-------+----------------------------------+----------------------------------+3.5 继续修改配置文件
api：
[root@controller ~]# vim /etc/glance/glance-api.conf
[keystone_authtoken]
auth_uri=http://controller:5000
auth_host=controller
auth_port=35357
auth_protocol=http
admin_tenant_name=service
admin_user=glance
admin_password=glance
[paste_deploy]
#认证方式
flavor=keystone
Registry（和上面的配置一样，可以直接粘贴）：
[root@controller ~]# vim /etc/glance/glance-registry.conf3.6 添加端点
创建服务：
[root@controller ~]# keystone service-create --name=glance --type=image --description="OpenStack Image Service"
+-------------+----------------------------------+
| Property | Value |
+-------------+----------------------------------+
| description | OpenStack Image Service |
| enabled | True |
| id | a3e76b6f69014258be5bca4463de201b |
| name | glance |
| type | image |
+-------------+----------------------------------+
将服务添加至端点：
# keystone endpoint-create --service-id=$(keystone service-list | awk '/image/{print $2}') \
--publicurl=http://controller:9292 \
--internalurl=http://controller:9292 \
--adminurl=http://controller:9292
+-------------+----------------------------------+
| Property | Value |
+-------------+----------------------------------+
| adminurl | http://controller:9292 |
| id | 947dbd1ba3284e6d81f531b4ec8ecb39 |
| internalurl | http://controller:9292 |
| publicurl | http://controller:9922 |
| region | regionOne |
| service_id | a3e76b6f69014258be5bca4463de201b |
+-------------+----------------------------------+
启动api和registry服务：
[root@controller ~]# for svc in api registry;do systemctl start openstack-glance-$svc;systemctl enable openstack-glance-$svc;done正常运行中：
可以看下日志有没报错：
[root@controller ~]# tail -50 /var/log/glance/api.log
[root@controller ~]# tail -50 /var/log/glance/registry.log3.7 上传保存磁盘映像文件
如果运行glance命令报错，在glance-api提示认证错误；然后继续排查keystone日志，发现日志有大量找不到用户，找不到租户，找不到角色的日志。可以尝试重启下数据库服务。我做实验的时候，keystone日志报了很多用户找不到，然后数据库卡死了，无法停止。强制杀死数据库后恢复
以下是日志报错
[root@controller ~]# glance image-list
Request returned failure status.
Invalid OpenStack Identity credentials.
2018-04-30 00:41:13.258 11637 WARNING keystoneclient.middleware.auth_token [-] Verify error: Command 'openssl' returned non-zero exit status 4
2018-04-30 00:41:13.260 11637 WARNING keystoneclient.middleware.auth_token [-] Authorization failed for token
2018-04-30 00:41:13.262 11637 INFO keystoneclient.middleware.auth_token [-] Invalid user token - deferring reject downstream
2018-04-30 00:41:13.264 11637 INFO glance.wsgi.server [-] 10.201.106.131 - - [30/Apr/2018 00:41:13] "GET /v1/images/detail?sort_key=name&sort_dir=asc&limit=20 HTTP/1.
2018-04-30 00:38:19.654 11617 WARNING keystone.common.wsgi [-] Could not find user, glance.
2018-04-30 00:38:19.745 11617 WARNING keystone.common.wsgi [-] Could not find role, admin.
2018-04-30 00:38:19.862 11617 WARNING keystone.common.wsgi [-] Could not find project, service.解决办法：
[root@controller ~]# kiall mariadb
[root@controller ~]# pkill mariadb
[root@controller ~]# systemctl start mariadb
[root@controller ~]# glance image-list
+----+------+-------------+------------------+------+--------+
| ID | Name | Disk Format | Container Format | Size | Status |
+----+------+-------------+------------------+------+--------+
+----+------+-------------+------------------+------+--------+默认目录：
filesystem_store_datadir=/var/lib/glance/images/
[root@controller ~]# ll -d /var/lib/glance/images/
drwxr-xr-x 2 glance glance 6 Apr 29 22:33 /var/lib/glance/images/
修改其他路径，记得修改属主属组权限
创建磁盘映像文件：
查看帮助：
[root@controller ~]# glance help image-create
使用网上提供的镜像文件创建：
[root@controller ~]# ls
cirros-no_cloud-0.3.0-i386-disk.img cirros-no_cloud-0.3.0-x86_64-disk.img
创建并上传镜像：
安装qemu-img查看映像的格式
[root@controller ~]# yum install qemu-img
[root@controller ~]# qemu-img info cirros-no_cloud-0.3.0-i386-disk.img
image: cirros-no_cloud-0.3.0-i386-disk.img
file format: qcow2
上传：
[root@controller ~]# glance image-create --name=cirros-0.3.0-i386 --disk-format=qcow2 --container-format=bare --is-public=true < /root/cirros-no_cloud-0.3.0-i386-disk.img
+------------------+--------------------------------------+
| Property | Value |
+------------------+--------------------------------------+
| checksum | ccdb7b71efb7cbae0ea4a437f55a5eb9 |
| container_format | bare |
| created_at | 2018-04-30T03:11:58 |
| deleted | False |
| deleted_at | None |
| disk_format | qcow2 |
| id | 18a0019f-48e5-4f78-9f13-1166b4d53a12 |
| is_public | False |
| min_disk | 0 |
| min_ram | 0 |
| name | cirros-0.3.0-i386 |
| owner | abfe5df994e54c6190e98e3f3f3dab38 |
| protected | False |
| size | 11010048 |
| status | active |
| updated_at | 2018-04-30T03:11:58 |
| virtual_size | None |
+------------------+--------------------------------------+
上传另一个64位的：
[root@controller ~]# glance image-create --name=cirros-0.3.0-x86_64 --disk-format=qcow2 --container-format=bare --is-public=true < /root/cirros-no_cloud-0.3.0-x86_64-disk.img
+------------------+--------------------------------------+
| Property | Value |
+------------------+--------------------------------------+
| checksum | 2b35be965df142f00026123a0fae4aa6 |
| container_format | bare |
| created_at | 2018-04-30T03:16:13 |
| deleted | False |
| deleted_at | None |
| disk_format | qcow2 |
| id | ca9993b8-91d5-44d1-889b-5496fd62114c |
| is_public | False |
| min_disk | 0 |
| min_ram | 0 |
| name | cirros-0.3.0-x86_64 |
| owner | abfe5df994e54c6190e98e3f3f3dab38 |
| protected | False |
| size | 11468800 |
| status | active |
| updated_at | 2018-04-30T03:16:14 |
| virtual_size | None |
+------------------+--------------------------------------+
查看映像文件列表：
[root@controller ~]# glance image-list
+--------------------------------------+---------------------+-------------+------------------+----------+--------+
| ID | Name | Disk Format | Container Format | Size | Status |
+--------------------------------------+---------------------+-------------+------------------+----------+--------+
| 18a0019f-48e5-4f78-9f13-1166b4d53a12 | cirros-0.3.0-i386 | qcow2 | bare | 11010048 | active |
| ca9993b8-91d5-44d1-889b-5496fd62114c | cirros-0.3.0-x86_64 | qcow2 | bare | 11468800 | active |
+--------------------------------------+---------------------+-------------+------------------+----------+--------+
（文件名和ID号保持一致）
[root@controller ~]# ls -lht /var/lib/glance/images/
total 22M
-rw-r----- 1 glance glance 11M Apr 30 11:16 ca9993b8-91d5-44d1-889b-5496fd62114c
-rw-r----- 1 glance glance 11M Apr 30 11:11 18a0019f-48e5-4f78-9f13-1166b4d53a123.8 glance其他命令
查看映像文件详细信息：
[root@controller ~]# glance image-show cirros-0.3.0-i386
下载磁盘映像文件：
[root@controller ~]# glance image-download --file=/tmp/cirros-0.3.0-i386.img --progress cirros-0.3.0-i386
[=============================>] 100%
[root@controller ~]# ls /tmp/cirros-0.3.0-i386.img
/tmp/cirros-0.3.0-i386.img4、Nova（Controller节点）
4.0 安装Qpid（消息队列）
安装：
[root@controller ~]# yum install qpid-cpp-server
关闭认证功能：
[root@controller ~]# vim /etc/qpid/qpidd.conf
auth=no
开启Qpid服务：
[root@controller ~]# systemctl start qpidd
[root@controller ~]# systemctl status qpidd
[root@controller ~]# systemctl enable qpidd4.1 安装相关程序包
[root@controller ~]# yum install openstack-nova-api openstack-nova-cert openstack-nova-conductor openstack-nova-console openstack-nova-novncproxy openstack-nova-scheduler python-novaclient
查看生成的文件：
[root@controller ~]# rpm -ql openstack-nova-api
[root@controller ~]# rpm -ql openstack-nova-console4.2 数据库配置
创建nova数据库：
MariaDB [(none)]> CREATE DATABASE nova CHARACTER SET 'utf8';
数据库用户授权：
MariaDB [(none)]> CREATE DATABASE nova CHARACTER SET 'utf8';
MariaDB [(none)]> GRANT ALL ON nova.* TO 'nova'@'%' IDENTIFIED BY 'nova';
MariaDB [(none)]> GRANT ALL ON nova.* TO 'nova'@'localhost' IDENTIFIED BY 'nova';
MariaDB [(none)]> FLUSH PRIVILEGES;
查看权限：
MariaDB [mysql]> USE mysql;
MariaDB [mysql]> SHOW GRANTS FOR 'nova';
修改数据库连接相关配置：
[root@controller ~]# cd /etc/nova/
[root@controller nova]# cp nova.conf{,.bak}
[root@controller ~]# vim /etc/nova/nova.conf
[database]
connection=mysql://nova:nova@192.168.1.1/nova
其他配置：
[root@controller ~]# vim /etc/nova/nova.conf
#设置rpc后端（消息队列）
[DEFAULT]
qpid_hostname=controller
rpc_backend=qpid
my_ip=192.168.1.1
vncserver_listen=192.168.1.1
vncserver_proxyclient_address=192.168.1.1初始化同步数据库：
[root@controller ~]# su -s /bin/sh -c "nova-manage db sync" nova
查看数据库表（I版有100多张张表）：
MariaDB [(none)]> USE nova;
MariaDB [nova]> SHOW TABLES;可以看下日志有没有报错：
[root@controller ~]#
[root@controller ~]# tail -50 /var/log/nova/nova-manage.log4.3 keystone创建nova用户，并分配角色
[root@controller ~]# keystone user-create --name=nova --pass=nova --email=nova@qq.com
+----------+----------------------------------+
| Property | Value |
+----------+----------------------------------+
| email | nova@qq.com |
| enabled | True |
| id | 772409dae5af4d819bc87e3cc90634c0 |
| name | nova |
| username | nova |
+----------+----------------------------------+
查看用户：
[root@controller ~]# keystone user-list
将nova用户加入admin角色及service租户
[root@controller ~]# keystone user-role-add --user=nova --role=admin --tenant=service
查看：
[root@controller ~]# keystone user-role-list --user=nova --tenant=service
+----------------------------------+-------+----------------------------------+----------------------------------+
| id | name | user_id | tenant_id |
+----------------------------------+-------+----------------------------------+----------------------------------+
| 2b54b14daca041c2a3dc66325f5048ce | admin | 772409dae5af4d819bc87e3cc90634c0 | f9f13bac5d6f40449b2e4560ab16536d |
+----------------------------------+-------+----------------------------------+----------------------------------+4.4 认证、端点配置
nova认证配置：
[root@controller ~]# vim /etc/nova/nova.conf
[DEFAULT]
auth_strategy=keystone
[keystone_authtoken]
auth_uri=http://controller:5000
auth_host=controller
auth_protocol=http
auth_port=35357
auth_version=v2.0
admin_user=nova
admin_password=nova
admin_tenant_name=service
keystone创建服务，并添加端点（访问服务）
[root@controller ~]# keystone service-create --name=nova --type=compute --description="OpenStack Compute"
+-------------+----------------------------------+
| Property | Value |
+-------------+----------------------------------+
| description | OpenStack Compute |
| enabled | True |
| id | a5600093b48145f1a8986481c0dd30ff |
| name | nova |
| type | compute |
+-------------+----------------------------------+
添加端点：
keystone endpoint-create \
--service-id=$(keystone service-list | awk '/compute/{print $2}') \
--publicurl=http://controller:8774/v2/%\(tenant_id\)s \
--internalurl=http://controller:8774/v2/%\(tenant_id\)s \
--adminurl=http://controller:8774/v2/%\(tenant_id\)s
+-------------+-----------------------------------------+
| Property | Value |
+-------------+-----------------------------------------+
| adminurl | http://controller:8774/v2/%(tenant_id)s |
| id | c4d8cc632b4541288a10fff74c6bc166 |
| internalurl | http://controller:8774/v2/%(tenant_id)s |
| publicurl | http://controller:8774/v2/%(tenant_id)s |
| region | regionOne |
| service_id | a5600093b48145f1a8986481c0dd30ff |
+-------------+-----------------------------------------+4.5 启动nova相关服务
[root@controller ~]# for svc in api cert consoleauth scheduler conductor novncproxy;do systemctl start openstack-nova-$svc;systemctl enable openstack-nova-$svc;done由于websockify版本过高，导致novnc启动失败，参考链接：https://www.unixhot.com/article/27
报错日志：
Apr 30 22:28:14 controller systemd: Starting OpenStack Nova NoVNC Proxy Server...
Apr 30 22:28:18 controller python: detected unhandled Python exception in '/usr/bin/nova-novncproxy'
Apr 30 22:28:20 controller abrt-server: Package 'openstack-nova-novncproxy' isn't signed with proper key
Apr 30 22:28:20 controller abrt-server: 'post-create' on '/var/spool/abrt/Python-2018-04-30-22:28:19-16407' exited with 1
Apr 30 22:28:20 controller abrt-server: Deleting problem directory '/var/spool/abrt/Python-2018-04-30-22:28:19-16407'
Apr 30 22:28:20 controller nova-novncproxy: WARNING: no 'numpy' module, HyBi protocol will be slower
Apr 30 22:28:20 controller nova-novncproxy: Traceback (most recent call last):
Apr 30 22:28:20 controller nova-novncproxy: File "/usr/bin/nova-novncproxy", line 10, in <module>
Apr 30 22:28:20 controller nova-novncproxy: sys.exit(main())
Apr 30 22:28:20 controller nova-novncproxy: File "/usr/lib/python2.7/site-packages/nova/cmd/novncproxy.py", line 87, in main
Apr 30 22:28:20 controller nova-novncproxy: wrap_cmd=None)
Apr 30 22:28:20 controller nova-novncproxy: File "/usr/lib/python2.7/site-packages/nova/console/websocketproxy.py", line 47, in __init__
Apr 30 22:28:20 controller nova-novncproxy: ssl_target=None, *args, **kwargs)
Apr 30 22:28:20 controller nova-novncproxy: File "/usr/lib/python2.7/site-packages/websockify/websocketproxy.py", line 231, in __init__
Apr 30 22:28:20 controller nova-novncproxy: websocket.WebSocketServer.__init__(self, RequestHandlerClass, *args, **kwargs)
Apr 30 22:28:20 controller nova-novncproxy: TypeError: __init__() got an unexpected keyword argument 'no_parent'
Apr 30 22:28:20 controller systemd: openstack-nova-novncproxy.service: main process exited, code=exited, status=1/FAILURE
Apr 30 22:28:20 controller systemd: Unit openstack-nova-novncproxy.service entered failed state.解决：
[root@controller ~]# yum install python-pip
[root@controller ~]# /usr/bin/pip2.7 install websockify==0.5.1
[root@controller ~]# systemctl start openstack-nova-novncproxy查看进程
[root@controller ~]# ps aux | grep nova | grep -v grep
nova 16617 2.8 2.2 329508 66236 ? Ss 22:55 1:30 /usr/bin/python /usr/bin/nova-api
nova 16627 0.3 2.5 425268 72820 ? Ss 22:55 0:10 /usr/bin/python /usr/bin/nova-cert
nova 16634 0.3 2.5 425212 72848 ? Ss 22:55 0:10 /usr/bin/python /usr/bin/nova-consoleauth
nova 16650 0.3 2.5 425772 73432 ? Ss 22:55 0:10 /usr/bin/python /usr/bin/nova-scheduler
nova 16657 2.8 1.4 302184 42920 ? Ss 22:55 1:28 /usr/bin/python /usr/bin/nova-conductor
nova 16669 0.1 1.1 369780 34520 ? Ssl 22:55 0:04 /usr/bin/python /usr/bin/nova-novncproxy --web /usr/share/novnc/
nova 16681 0.0 1.4 308920 42972 ? S 22:55 0:00 /usr/bin/python /usr/bin/nova-api
nova 16682 0.0 1.4 308920 42972 ? S 22:55 0:00 /usr/bin/python /usr/bin/nova-api
nova 16683 0.2 2.4 425308 69912 ? S 22:55 0:08 /usr/bin/python /usr/bin/nova-conductor
nova 16684 0.2 2.4 425300 69896 ? S 22:55 0:07 /usr/bin/python /usr/bin/nova-conductor
nova 16696 0.0 2.1 329508 61448 ? S 22:55 0:00 /usr/bin/python /usr/bin/nova-api
nova 16697 0.0 2.1 329508 61448 ? S 22:55 0:00 /usr/bin/python /usr/bin/nova-api
nova 16709 0.0 2.1 329508 61440 ? S 22:55 0:00 /usr/bin/python /usr/bin/nova-api
nova 16710 0.0 2.1 329508 61440 ? S 22:55 0:00 /usr/bin/python /usr/bin/nova-api4.6 另一个报错
日志：
2018-05-01 10:15:21.566 17183 ERROR stevedore.extension [-] Could not load 'file': cannot import name util
2018-05-01 10:15:21.567 17183 ERROR stevedore.extension [-] cannot import name util
2018-05-01 10:15:21.567 17183 TRACE stevedore.extension Traceback (most recent call last):
2018-05-01 10:15:21.567 17183 TRACE stevedore.extension File "/usr/lib/python2.7/site-packages/stevedore/extension.py", line 162, in _load_plugins
2018-05-01 10:15:21.567 17183 TRACE stevedore.extension verify_requirements,
2018-05-01 10:15:21.567 17183 TRACE stevedore.extension File "/usr/lib/python2.7/site-packages/stevedore/extension.py", line 177, in _load_one_plugin
2018-05-01 10:15:21.567 17183 TRACE stevedore.extension plugin = ep.load(require=verify_requirements)
2018-05-01 10:15:21.567 17183 TRACE stevedore.extension File "/usr/lib/python2.7/site-packages/pkg_resources.py", line 2260, in load
2018-05-01 10:15:21.567 17183 TRACE stevedore.extension entry = __import__(self.module_name, globals(),globals(), ['__name__'])
2018-05-01 10:15:21.567 17183 TRACE stevedore.extension File "/usr/lib/python2.7/site-packages/nova/image/download/file.py", line 23, in <module>
2018-05-01 10:15:21.567 17183 TRACE stevedore.extension import nova.virt.libvirt.utils as lv_utils
2018-05-01 10:15:21.567 17183 TRACE stevedore.extension File "/usr/lib/python2.7/site-packages/nova/virt/libvirt/__init__.py", line 15, in <module>
2018-05-01 10:15:21.567 17183 TRACE stevedore.extension from nova.virt.libvirt import driver
2018-05-01 10:15:21.567 17183 TRACE stevedore.extension File "/usr/lib/python2.7/site-packages/nova/virt/libvirt/driver.py", line 59, in <module>
2018-05-01 10:15:21.567 17183 TRACE stevedore.extension from eventlet import util as eventlet_util
2018-05-01 10:15:21.567 17183 TRACE stevedore.extension ImportError: cannot import name util
参考链接：http://blog.sina.com.cn/s/blog_69a636860102v91c.html
处理办法：重装eventlet老版本
[root@controller ~]# pip install eventlet==0.15.2
再次重启所有服务：
[root@controller ~]# for svc in api cert consoleauth scheduler conductor novncproxy;do systemctl restart openstack-nova-$svc;done
查看日志还有没有报错（全部日志查看一遍，并且以最后时间为准）：
[root@controller ~]# date
Tue May 1 10:40:43 CST 2018
[root@controller ~]# tail -50 /var/log/nova/nova-
nova-api.log nova-cert.log nova-conductor.log nova-consoleauth.log nova-manage.log nova-scheduler.log
现在时间40分后，重启服务已经没有报错了：
2018-05-01 10:35:51.000 17790 ERROR stevedore.extension [-] Could not load 'file': cannot import name util
2018-05-01 10:35:51.000 17790 ERROR stevedore.extension [-] cannot import name util
2018-05-01 10:35:51.000 17790 TRACE stevedore.extension Traceback (most recent call last):
2018-05-01 10:35:51.000 17790 TRACE stevedore.extension File "/usr/lib/python2.7/site-packages/stevedore/extension.py", line 162, in _load_plugins
2018-05-01 10:35:51.000 17790 TRACE stevedore.extension verify_requirements,
2018-05-01 10:35:51.000 17790 TRACE stevedore.extension File "/usr/lib/python2.7/site-packages/stevedore/extension.py", line 177, in _load_one_plugin
2018-05-01 10:35:51.000 17790 TRACE stevedore.extension plugin = ep.load(require=verify_requirements)
2018-05-01 10:35:51.000 17790 TRACE stevedore.extension File "/usr/lib/python2.7/site-packages/pkg_resources.py", line 2260, in load
2018-05-01 10:35:51.000 17790 TRACE stevedore.extension entry = __import__(self.module_name, globals(),globals(), ['__name__'])
2018-05-01 10:35:51.000 17790 TRACE stevedore.extension File "/usr/lib/python2.7/site-packages/nova/image/download/file.py", line 23, in <module>
2018-05-01 10:35:51.000 17790 TRACE stevedore.extension import nova.virt.libvirt.utils as lv_utils
2018-05-01 10:35:51.000 17790 TRACE stevedore.extension File "/usr/lib/python2.7/site-packages/nova/virt/libvirt/__init__.py", line 15, in <module>
2018-05-01 10:35:51.000 17790 TRACE stevedore.extension from nova.virt.libvirt import driver
2018-05-01 10:35:51.000 17790 TRACE stevedore.extension File "/usr/lib/python2.7/site-packages/nova/virt/libvirt/driver.py", line 59, in <module>
2018-05-01 10:35:51.000 17790 TRACE stevedore.extension from eventlet import util as eventlet_util
2018-05-01 10:35:51.000 17790 TRACE stevedore.extension ImportError: cannot import name util
2018-05-01 10:35:51.000 17790 TRACE stevedore.extension
2018-05-01 10:35:51.028 17790 WARNING keystoneclient.middleware.auth_token [-] Configuring admin URI using auth fragments. This is deprecated, use 'identity_uri' instead.
2018-05-01 10:40:26.549 17957 WARNING keystoneclient.middleware.auth_token [-] Configuring admin URI using auth fragments. This is deprecated, use 'identity_uri' instead.
2018-05-01 10:40:26.602 17957 WARNING keystoneclient.middleware.auth_token [-] Configuring admin URI using auth fragments. This is deprecated, use 'identity_uri' instead.
2018-05-01 10:40:27.488 17957 WARNING keystoneclient.middleware.auth_token [-] Configuring admin URI using auth fragments. This is deprecated, use 'identity_uri' instead.4.7 使用nova命令测试
查看磁盘映像文件：
[root@controller ~]# nova image-list
+--------------------------------------+---------------------+--------+--------+
| ID | Name | Status | Server |
+--------------------------------------+---------------------+--------+--------+
| 18a0019f-48e5-4f78-9f13-1166b4d53a12 | cirros-0.3.0-i386 | ACTIVE | |
| ca9993b8-91d5-44d1-889b-5496fd62114c | cirros-0.3.0-x86_64 | ACTIVE | |
+--------------------------------------+---------------------+--------+--------+二、compute1节点
5、Nova（Node节点，hypervisor节点）
5.1 查看是否支持虚拟化
查看是否支持虚拟化：
[root@compute1 ~]# egrep --color=auto -i "(svm|vmx)" /proc/cpuinfo5.2 安装compute相关组件包
配置yum源：
[root@compute1 ~]# vim /etc/yum.repos.d/C7-local.repo
[openstack-I]
name=OpenStack I Repository
baseurl=https://repos.fedorapeople.org/repos/openstack/EOL/openstack-icehouse/epel-7/
gpgcheck=0
enabled=1
更新yum：
# yum clean all
# yum repolist
安装
[root@compute1 ~]# yum install openstack-nova-compute
报错：
Error: Package: python-nova-2014.1.5-1.el7.centos.noarch (Openstack-I)
Requires: python-greenlet
需要安装greenlet包，epel上没有，得自己下载：
[root@compute1 ~]# ls python-greenlet-0.4.2-4.el7.x86_64.rpm
python-greenlet-0.4.2-4.el7.x86_64.rpm
[root@compute1 ~]# yum install -y python-greenlet-0.4.2-4.el7.x86_64.rpm
重新安装：
[root@compute1 ~]# yum install openstack-nova-compute5.3 配置
备份配置：
[root@compute1 ~]# cd /etc/nova/
[root@compute1 nova]# cp nova.conf{,.bak}
开始配置：
[root@compute1 ~]# vim /etc/nova/nova.conf
#数据库连接配置：
connection=mysql://nova:nova@192.168.1.1/nova
#qpid配置：
qpid_hostname=192.168.1.1
rpc_backend=qpid
#认证
[DEFAULE]
auth_strategy=keystone
[keystone_authtoken]
auth_uri=http://controller:5000
auth_host=controller
auth_protocol=http
auth_port=35357
auth_version=v2.0
admin_user=nova
admin_password=nova
admin_tenant_name=service
#glance配置
glance_host=controller
#vnc配置：
my_ip=192.168.1.2
vncserver_listen=0.0.0.0
vncserver_proxyclient_address=192.168.1.2
vnc_enabled=true
novncproxy_base_url=http://controller:6080/vnc_auto.html
#设置支持的虚拟化方式（前提是支持kvm虚拟化，否则改成qemu）
virt_type=kvm
#修改虚拟网络异常，报错超时时间
vif_plugging_timeout=10
#设置虚拟机网络接口异常时，依然可以启动虚拟机
vif_plugging_is_fatal=false5.4 服务启动
[root@compute1 ~]# lsmod | grep kvm
kvm_intel 162153 0
kvm 525259 1 kvm_intel
先启动libvirtd服务：
[root@compute1 ~]# systemctl start libvirtd.service
启动messagebus（总线服务）
[root@compute1 ~]# systemctl start messagebus
启动openstack-compute服务：
[root@compute1 ~]# systemctl start openstack-nova-compute
又出现eventlet认不到报错，而且在安装oepnstack-compute组件时，自动更新了其他组件导致yum损坏。
报错日志：
[root@compute1 ~]# rpm
error: Failed to initialize NSS library
error: Failed to initialize NSS library
There was a problem importing one of the Python modules
required to run yum. The error leading to this problem was:
cannot import name ts
Please install a package which provides this module, or
verify that the module is installed correctly.
It's possible that the above module doesn't match the
current version of Python, which is:
2.7.5 (default, Nov 20 2015, 02:00:19)
[GCC 4.8.5 20150623 (Red Hat 4.8.5-4)]
修复（参考链接：https://www.huangzz.xyz/jie-jue-failed-to-initialize-nss-library-de-wen-ti.html）：
[root@compute1 ~]# wget https://www.huangzz.xyz/wp-content/uploads/MyUploads/libnspr4.so.tar
[root@compute1 ~]# tar xf libnspr4.so.tar
[root@compute1 ~]# mv libnspr4.so /usr/lib64/
mv: overwrite ‘/usr/lib64/libnspr4.so’? y
[root@compute1 ~]# yum install glibc.i686 nspr
安装eventlet旧版本：
[root@compute1 ~]# yum install python-pip
[root@compute1 ~]# pip install eventlet==0.15.2
已经可以启动openstack-nova-compute进程：
[root@compute1 ~]# systemctl start openstack-nova-compute5.5 又一个报错，libvirt相关（此处巨坑,请先备份nova配置文件）
此处巨坑,请先备份nova配置文件，甚至做个镜像
好像libvirt的版本跟这版本的compute有不兼容。。。。
日志报错：
May 01 14:50:47 compute1.com libvirtd[4336]: 2018-05-01 06:50:47.622+0000: 4341: error : virDBusCall:1570 : error from service: CheckAuthorization: Connection is closed
May 01 14:50:47 compute1.com libvirtd[4336]: 2018-05-01 06:50:47.622+0000: 4336: error : virNetSocketReadWire:1808 : End of file while reading data: Input/output error
May 01 14:50:55 compute1.com libvirtd[4336]: 2018-05-01 06:50:55.209+0000: 4340: error : virDBusCall:1570 : error from service: CheckAuthorization: Connection is closed
May 01 14:50:55 compute1.com libvirtd[4336]: 2018-05-01 06:50:55.617+0000: 4336: error : virNetSocketReadWire:1808 : End of file while reading data: Input/output error
2018-05-01 14:41:43.839 4248 INFO oslo.messaging._drivers.impl_qpid [-] Connected to AMQP server on 192.168.1.1:5672
2018-05-01 14:50:22.359 4248 WARNING nova.virt.libvirt.driver [-] Connection to libvirt lost: 0
2018-05-01 14:50:47.623 4248 ERROR nova.virt.libvirt.driver [-] Connection to libvirt failed: error from service: CheckAuthorization: Connection is closed
2018-05-01 14:50:47.623 4248 TRACE nova.virt.libvirt.driver Traceback (most recent call last):
2018-05-01 14:50:47.623 4248 TRACE nova.virt.libvirt.driver File "/usr/lib/python2.7/site-packages/nova/virt/libvirt/driver.py", line 789, in _connect
2018-05-01 14:50:47.623 4248 TRACE nova.virt.libvirt.driver libvirt.openAuth, uri, auth, flags)
2018-05-01 14:50:47.623 4248 TRACE nova.virt.libvirt.driver File "/usr/lib/python2.7/site-packages/eventlet/tpool.py", line 141, in proxy_call
2018-05-01 14:50:47.623 4248 TRACE nova.virt.libvirt.driver rv = execute(f, *args, **kwargs)
2018-05-01 14:50:47.623 4248 TRACE nova.virt.libvirt.driver File "/usr/lib/python2.7/site-packages/eventlet/tpool.py", line 122, in execute
2018-05-01 14:50:47.623 4248 TRACE nova.virt.libvirt.driver six.reraise(c, e, tb)
2018-05-01 14:50:47.623 4248 TRACE nova.virt.libvirt.driver File "/usr/lib/python2.7/site-packages/eventlet/tpool.py", line 80, in tworker
2018-05-01 14:50:47.623 4248 TRACE nova.virt.libvirt.driver rv = meth(*args, **kwargs)
2018-05-01 14:50:47.623 4248 TRACE nova.virt.libvirt.driver File "/usr/lib64/python2.7/site-packages/libvirt.py", line 105, in openAuth
2018-05-01 14:50:47.623 4248 TRACE nova.virt.libvirt.driver if ret is None:raise libvirtError('virConnectOpenAuth() failed')
2018-05-01 14:50:47.623 4248 TRACE nova.virt.libvirt.driver libvirtError: error from service: CheckAuthorization: Connection is closed
2018-05-01 14:50:47.623 4248 TRACE nova.virt.libvirt.driver
2018-05-01 14:50:47.766 4248 ERROR nova.openstack.common.periodic_task [-] Error during ComputeManager.update_available_resource: Connection to the hypervisor is broken on host: compute1.com
2018-05-01 14:50:47.766 4248 TRACE nova.openstack.common.periodic_task Traceback (most recent call last):
2018-05-01 14:50:47.766 4248 TRACE nova.openstack.common.periodic_task File "/usr/lib/python2.7/site-packages/nova/openstack/common/periodic_task.py", line 182, in run_periodic_tasks
2018-05-01 14:50:47.766 4248 TRACE nova.openstack.common.periodic_task task(self, context)
2018-05-01 14:50:47.766 4248 TRACE nova.openstack.common.periodic_task File "/usr/lib/python2.7/site-packages/nova/compute/manager.py", line 5529, in update_available_resource
2018-05-01 14:50:47.766 4248 TRACE nova.openstack.common.periodic_task rt.update_available_resource(context)
2018-05-01 14:50:47.766 4248 TRACE nova.openstack.common.periodic_task File "/usr/lib/python2.7/site-packages/nova/openstack/common/lockutils.py", line 249, in inner
2018-05-01 14:50:47.766 4248 TRACE nova.openstack.common.periodic_task return f(*args, **kwargs)
2018-05-01 14:50:47.766 4248 TRACE nova.openstack.common.periodic_task File "/usr/lib/python2.7/site-packages/nova/compute/resource_tracker.py", line 293, in update_available_resource
2018-05-01 14:50:47.766 4248 TRACE nova.openstack.common.periodic_task resources = self.driver.get_available_resource(self.nodename)
2018-05-01 14:50:47.766 4248 TRACE nova.openstack.common.periodic_task File "/usr/lib/python2.7/site-packages/nova/virt/libvirt/driver.py", line 4204, in get_available_resource
2018-05-01 14:50:47.766 4248 TRACE nova.openstack.common.periodic_task stats = self.get_host_stats(refresh=True)
2018-05-01 14:50:47.766 4248 TRACE nova.openstack.common.periodic_task File "/usr/lib/python2.7/site-packages/nova/virt/libvirt/driver.py", line 4902, in get_host_stats
2018-05-01 14:50:47.766 4248 TRACE nova.openstack.common.periodic_task return self.host_state.get_host_stats(refresh=refresh)
2018-05-01 14:50:47.766 4248 TRACE nova.openstack.common.periodic_task File "/usr/lib/python2.7/site-packages/nova/virt/libvirt/driver.py", line 5310, in get_host_stats
2018-05-01 14:50:47.766 4248 TRACE nova.openstack.common.periodic_task self.update_status()
2018-05-01 14:50:47.766 4248 TRACE nova.openstack.common.periodic_task File "/usr/lib/python2.7/site-packages/nova/virt/libvirt/driver.py", line 5344, in update_status
2018-05-01 14:50:47.766 4248 TRACE nova.openstack.common.periodic_task data["memory_mb"] = self.driver.get_memory_mb_total()
2018-05-01 14:50:47.766 4248 TRACE nova.openstack.common.periodic_task File "/usr/lib/python2.7/site-packages/nova/virt/libvirt/driver.py", line 3839, in get_memory_mb_total
2018-05-01 14:50:47.766 4248 TRACE nova.openstack.common.periodic_task return self._conn.getInfo()[1]
2018-05-01 14:50:47.766 4248 TRACE nova.openstack.common.periodic_task File "/usr/lib/python2.7/site-packages/nova/virt/libvirt/driver.py", line 723, in _get_connection
2018-05-01 14:50:47.766 4248 TRACE nova.openstack.common.periodic_task wrapped_conn = self._get_new_connection()
2018-05-01 14:50:47.766 4248 TRACE nova.openstack.common.periodic_task File "/usr/lib/python2.7/site-packages/nova/virt/libvirt/driver.py", line 676, in _get_new_connection
2018-05-01 14:50:47.766 4248 TRACE nova.openstack.common.periodic_task wrapped_conn = self._connect(self.uri(), self.read_only)
2018-05-01 14:50:47.766 4248 TRACE nova.openstack.common.periodic_task File "/usr/lib/python2.7/site-packages/nova/virt/libvirt/driver.py", line 798, in _connect
2018-05-01 14:50:47.766 4248 TRACE nova.openstack.common.periodic_task raise exception.HypervisorUnavailable(host=CONF.host)
2018-05-01 14:50:47.766 4248 TRACE nova.openstack.common.periodic_task HypervisorUnavailable: Connection to the hypervisor is broken on host: compute1.com处理（libvirt原始版本3.2）：
更换镜像源地址：http://vault.centos.org/7.2.1511/os/x86_64/
或者使用7.2的CD镜像源
[root@compute1 ~]# yum clean all
[root@compute1 ~]# yum repolist
卸载老版本：
[root@compute1 ~]# yum remove libvirt-daemon libvirt-libs libvirt-python
安装1.2.17的libvirt的时候，又报cyrus-sasl-lib版本高，强制降低版本
[root@compute1 ~]# rpm -Uvh cyrus-sasl-lib-2.1.26-19.2.el7.x86_64.rpm --force --nodeps
重新安装（记得关闭其他镜像源，只保留CD镜像和openstack的镜像源，安装libvirt1.2版本的）：
[root@compute1 ~]# yum install openstack-nova-compute
libvirt libvirt-python
启动messagebus（总线服务）
[root@compute1 ~]# systemctl restart messagebus
启动libvirt
[root@compute1 ~]# systemctl start libvirtd还是报错，不理了。
启动openstack-nova-compute
[root@compute1 ~]# systemctl start openstack-nova-compute.service设置服务开机启动：
[root@compute1 ~]# systemctl enable libvirtd
[root@compute1 ~]# systemctl enable messagebus
[root@compute1 ~]# systemctl enable openstack-nova-compute5.6 验证
回到controller节点验证：
可以到compute1计算节点了：
[root@controller ~]# nova hypervisor-list
+----+---------------------+
| ID | Hypervisor hostname |
+----+---------------------+
| 1 | compute1.com |
+----+---------------------+
查看comput1的资源统计情况
[root@controller ~]# nova hypervisor-stats
+----------------------+-------+
| Property | Value |
+----------------------+-------+
| count | 1 |
| current_workload | 0 |
| disk_available_least | 77 |
| free_disk_gb | 78 |
| free_ram_mb | 2286 |
| local_gb | 78 |
| local_gb_used | 0 |
| memory_mb | 2798 |
| memory_mb_used | 512 |
| running_vms | 0 |
| vcpus | 2 |
| vcpus_used | 0 |
+----------------------+-------+
查看compute1详细信息:
[root@controller ~]# nova hypervisor-show compute1.com三、网络配置
6、Neutron Server（controller）
开始使用第三个网络节点，network1
6.1 配置neutron数据库信息
创建数据库：
MariaDB [(none)]> CREATE DATABASE neutron CHARACTER SET 'utf8';
授权：
MariaDB [(none)]> GRANT ALL ON neutron.* TO 'neutron'@'%' IDENTIFIED BY 'neutron';
MariaDB [(none)]> GRANT ALL ON neutron.* TO 'neutron'@'localhost' IDENTIFIED BY 'neutron';
MariaDB [(none)]> FLUSH PRIVILEGES;6.2 keystone创建neutron用户
[root@controller ~]# keystone user-create --name=neutron --pass=neutron --email=neutron@qq.com
+----------+----------------------------------+
| Property | Value |
+----------+----------------------------------+
| email | neutron@qq.com |
| enabled | True |
| id | fa48f4bfed2746d2b2711c46da825407 |
| name | neutron |
| username | neutron |
+----------+----------------------------------+
把用户添加到管理角色和service租户里面：
[root@controller ~]# keystone user-role-add --user=neutron --tenant=service --role=admin
查看：
[root@controller ~]# keystone user-role-list --user=neutron --tenant=service
+----------------------------------+-------+----------------------------------+----------------------------------+
| id | name | user_id | tenant_id |
+----------------------------------+-------+----------------------------------+----------------------------------+
| 2b54b14daca041c2a3dc66325f5048ce | admin | fa48f4bfed2746d2b2711c46da825407 | f9f13bac5d6f40449b2e4560ab16536d |
+----------------------------------+-------+----------------------------------+----------------------------------+6.3 创建neutron服务和访问端点（访问接口）
添加服务：
[root@controller ~]# keystone service-create --name neutron --type network --description "OpenStack Networking"
+-------------+----------------------------------+
| Property | Value |
+-------------+----------------------------------+
| description | OpenStack Networking |
| enabled | True |
| id | da34b8a9c89446c6901888e27db931e3 |
| name | neutron |
| type | network |
+-------------+----------------------------------+
添加端点：
keystone endpoint-create \
--service-id $(keystone service-list | awk '/network/{print $2}') \
--publicurl http://controller:9696 \
--adminurl http://controller:9696 \
--internalurl http://controller:9696
+-------------+----------------------------------+
| Property | Value |
+-------------+----------------------------------+
| adminurl | http://controller:9696 |
| id | 6f9f3b37e1d9451896a36bfed1ed1536 |
| internalurl | http://controller:9696 |
| publicurl | http://controller:9696 |
| region | regionOne |
| service_id | da34b8a9c89446c6901888e27db931e3 |
+-------------+----------------------------------+6.4 安装neutron程序包
[root@controller ~]# yum install openstack-neutron openstack-neutron-ml2 python-neutronclient6.5 配置neutron
备份配置
[root@controller neutron]# cd /etc/neutron/
[root@controller neutron]# cp neutron.conf neutron.conf.bak
查看tenant中service的ID号
[root@controller ~]# keystone tenant-list
+----------------------------------+---------+---------+
| id | name | enabled |
+----------------------------------+---------+---------+
| abfe5df994e54c6190e98e3f3f3dab38 | admin | True |
| fbff77c905114d50b5be94ffd46203cd | demo | True |
| f9f13bac5d6f40449b2e4560ab16536d | service | True |
+----------------------------------+---------+---------+
配置：
connection = mysql://neutron:neutron@192.168.1.1:3306/neutron
[DEFAULT]
#可以显示详细日志
verbose = True
auth_strategy =keystone
[keystone_authtoken]
auth_uri=http://controller:5000
auth_host=controller
auth_protocol=http
auth_port=35357
admin_user=neutron
admin_password=neutron
admin_tenant_name=service
rpc_backend=neutron.openstack.common.rpc.impl_qpid
qpid_hostname = 192.168.1.1
#配置网络拓扑改变的事件通知
notify_nova_on_port_status_changes = True
notify_nova_on_port_data_changes = True
nova_url = http://controller:8774/v2
nova_admin_username = nova
nova_admin_tenant_id = f9f13bac5d6f40449b2e4560ab16536d
nova_admin_password = nova
nova_admin_auth_url = http://controller:35357/v2.0
#配置网络核心插件：
core_plugin = ml2
service_plugins = router6.6 配置ml2插件
备份：
[root@controller ~]# cd /etc/neutron/plugins/ml2/
[root@controller ml2]# cp ml2_conf.ini ml2_conf.ini.bak
配置
[root@controller ~]# vim /etc/neutron/plugins/ml2/ml2_conf.ini
[ml2]
type_drivers = gre
tenant_network_types = gre
mechanism_drivers = openvswitch
[ml2_type_gre]
tunnel_id_ranges = 1:1000
[securitygroup]
enable_security_group = True
firewall_driver = neutron.agent.linux.iptables_firewall.OVSHybridIptablesFirewallD
river6.9 compute配置使用网络
配置：
[root@controller ~]# vim /etc/nova/nova.conf
[DEFAULT]
network_api_class=nova.network.neutronv2.api.API
neutron_url=http://controller:9696
neutron_auth_strategy=keystone
neutron_admin_tenant_name=service
neutron_admin_username=neutron
neutron_admin_password=neutron
neutron_admin_auth_url=http://controller:35357/v2.0
linuxnet_interface_driver=nova.network.linux_net.LinuxOVSInterfaceDriver
firewall_driver=nova.virt.firewall.NoopFirewallDriver
security_group_api=neutron
创建超链接：
[root@controller ~]# ln -s /etc/neutron/plugins/ml2/ml2_conf.ini /etc/neutron/plugin.ini
[root@controller ~]# ll /etc/neutron/plugin.ini
lrwxrwxrwx 1 root root 37 May 2 01:36 /etc/neutron/plugin.ini -> /etc/neutron/plugins/ml2/ml2_conf.ini6.10 重启nova的几个服务
[root@controller ~]# systemctl restart openstack-nova-api
[root@controller ~]# systemctl restart openstack-nova-scheduler
[root@controller ~]# systemctl restart openstack-nova-conductor6.11 启动neutron服务
[root@controller ~]# systemctl start neutron-server
[root@controller ~]# systemctl enable neutron-server查看状态：
查看日志：
[root@controller ~]# tail -60 /var/log/neutron/server.log网上说日志找不到插件是正常的，好吧我信了。。。
[root@controller ~]# grep -i "error" /var/log/neutron/server.log
[root@controller ~]# grep -i "fa" /var/log/neutron/server.log7、netwrok node （network1节点配置）
7.1 配置好相关OpenStack版本的镜像源
7.2 编辑内核参数
[root@network1 ~]# vim /etc/sysctl.conf
net.ipv4.ip_forward=1
net.ipv4.conf.all.rp_filter=0
net.ipv4.conf.default.rp_filter=0
net.bridge.bridge-nf-call-arptables=1
net.bridge.bridge-nf-call-iptables=1
net.bridge.bridge-nf-call-ip6tables=1
激活：
[root@network1 ~]# sysctl -p7.3 安装neutron程序包（这里需要epel源。。。，确保openvswitch的安装包来自openstack镜像源即可）
[root@network1 ~]# yum install python-greenlet-0.4.2-4.el7.x86_64.rpm
[root@network1 ~]# yum install openstack-neutron openstack-neutron-ml2 openstack-neutron-openvswitch7.4 neutron配置
备份：
[root@network1 ~]# cd /etc/neutron/
[root@network1 neutron]# cp neutron.conf neutron.conf.bak
配置：
[root@network1 ~]# vim /etc/neutron/neutron.conf
[DEFAULT]
auth_strategy = keystone
[keystone_authtoken]
auth_uri=http://controller:5000
auth_host=controller
auth_protocol=http
auth_port=35357
admin_user=neutron
admin_password=neutron
admin_tenant_name=service
#QPID
rpc_backend=neutron.openstack.common.rpc.impl_qpid
qpid_hostname = 192.168.1.1
core_plugin = ml2
service_plugins = router7.5 配置l3插件
[root@network1 ~]# cd /etc/neutron/
[root@network1 neutron]# cp l3_agent.ini l3_agent.ini.bak
[root@network1 ~]# vim /etc/neutron/l3_agent.ini
[DEFAULT]
verbose = True
interface_driver = neutron.agent.linux.interface.OVSInterfaceDriver
use_namespaces = True7.6 配置DHCP
[root@network1 ~]# vim /etc/neutron/dhcp_agent.ini
[DEFAULT]
verbose = True
interface_driver = neutron.agent.linux.interface.OVSInterfaceDriver
dhcp_driver = neutron.agent.linux.dhcp.Dnsmasq
use_namespaces = True
dnsmasq_config_file = /etc/neutron/dnsmasq-neutron.conf
强制限制帧大小
[root@network1 ~]# vim /etc/neutron/dnsmasq-neutron.conf
#强制限制帧大小
dhcp-option-force=26,14547.7 配置metadata
[root@network1 ~]# vim /etc/neutron/metadata_agent.ini
verbose = True
auth_url = http://controller:5000/v2.0
auth_region = RegionOne
admin_tenant_name = service
admin_user = neutron
admin_password = neutron
nova_metadata_ip = controller
metadata_proxy_shared_secret = METADATA_SECRET7.8 回到controller节点，配置metadata
[root@controller ~]# vim /etc/nova/nova.conf
service_neutron_metadata_proxy=true
neutron_metadata_proxy_shared_secret=METADATA_SECRET
重启nova-api服务：
[root@controller ~]# systemctl restart openstack-nova-api7.9 继续在network1节点，配置l2插件
[root@network1 ~]# vim /etc/neutron/plugins/ml2/ml2_conf.ini
[ml2]
type_drivers = gre
tenant_network_types = gre
mechanism_drivers = openvswitch
[ml2_type_gre]
tunnel_id_ranges = 1:1000
[securitygroup]
enable_security_group = True
firewall_driver = neutron.agent.linux.iptables_firewall.OVSHybridIptablesFirewallDriver
#自己加一段
[ovs]
local_ip = 192.168.2.254
tunnel_type = gre
enable_tunneling = True7.10 启动network1上的openvswitch服务并配置
启动openvswitch:
[root@network1 ~]# systemctl start openvswitch
[root@network1 ~]# systemctl enable openvswitch
增加一个内部桥：
[root@network1 ~]# ovs-vsctl add-br br-in
增加一个外部桥
[root@network1 ~]# ovs-vsctl add-br br-ex
去除eth2的地址、网关、掩码。把eth2添加进br-ex外部桥
[root@network1 ~]# ifconfig eth2 0;ifconfig br-ex10.201.106.133/24 up;ovs-vsctl add-port br-ex eth2
另外在eth2配置中去除地址、网关、掩码
配置默认路由
[root@network1 ~]# route add default gw 10.201.106.2
查看
[root@network1 ~]# ovs-vsctl show
c95ca634-3c90-4aca-ae62-21d4f740e3b5
Bridge br-ex
Port br-ex
Interface br-ex
type: internal
Port "eth2"
Interface "eth2"
设置外部桥ID号：
[root@network1 ~]# ovs-vsctl br-set-external-id br-ex bridge-id br-ex
关闭外网eth2网卡的gro功能，增加网络性能：
[root@network1 ~]# ethtool -K eth2 gro off7.11 其他配置
创建l2配置软链接：
[root@network1 ~]# ln -s /etc/neutron/plugins/ml2/ml2_conf.ini /etc/neutron/plugin.ini
由于bug原因，需要修改openvswitch的init启动脚本
备份：
[root@network1 ~]# rpm -ql openstack-neutron-openvswitch | grep agent.service
/usr/lib/systemd/system/neutron-openvswitch-agent.service
[root@network1 ~]# cp /usr/lib/systemd/system/neutron-openvswitch-agent.service{,.orig}
替换：
[root@network1 ~]# vim /usr/lib/systemd/system/neutron-openvswitch-agent.service
:%s@plugins/openvswitch/ovs_neutron_plugin.ini@plugin.ini@ig
修改服务链接：
[root@network1 ~]# systemctl disable neutron-openvswitch-agent
[root@network1 ~]# systemctl enable neutron-openvswitch-agent7.12 network1服务启动
[root@network1 ~]# for svc in openvswitch l3 dhcp metadata;do systemctl start neutron-${svc}-agent;systemctl enable neutron-${svc}-agent;done
查看状态：
[root@network1 ~]# for svc in openvswitch l3 dhcp metadata;do systemctl status neutron-${svc}-agent;done
看看日志：
[root@network1 ~]# tail -50 /var/log/neutron/
dhcp-agent.log l3-agent.log metadata-agent.log openvswitch-agent.log8、compute1节点的网络配置
8.1 开启内核网络功能
[root@compute1 ~]# vim /etc/sysctl.conf
net.ipv4.conf.all.rp_filter=0
net.ipv4.conf.default.rp_filter=0
net.bridge.bridge-nf-call-arptables=1
net.bridge.bridge-nf-call-iptables=1
net.bridge.bridge-nf-call-ip6tables=1
激活：
[root@compute1 ~]# sysctl -p8.2 安装相关程序包（依赖包需要epel）
[root@compute1 ~]# yum install openstack-neutron-ml2 openstack-neutron-openvswitch8.3 配置
备份：
[root@compute1 ~]# cp /etc/neutron/neutron.conf{,.bak}
[DEFAULT]
auth_strategy = keystone
[keystone_authtoken]
auth_uri=http://controller:5000
auth_host=controller
auth_protocol=http
auth_port=35357
admin_user=neutron
admin_password=neutron
admin_tenant_name=service
# QPID
rpc_backend=neutron.openstack.common.rpc.impl_qpid
qpid_hostname = 192.168.1.1
core_plugin = ml2
service_plugins = router8.4 ml2配置
做个备份先：
[root@compute1 ~]# cp /etc/neutron/plugins/ml2/ml2_conf.ini{,.bak}
[root@compute1 ~]# ls /etc/neutron/plugins/ml2/ml2_conf.ini*
/etc/neutron/plugins/ml2/ml2_conf.ini /etc/neutron/plugins/ml2/ml2_conf.ini.bak
拷贝network1的配置
[root@network1 ~]# scp /etc/neutron/plugins/ml2/ml2_conf.ini 192.168.1.2:/etc/neutron/plugins/ml2/
修改权限
chown root:neutron /etc/neutron/plugins/ml2/ml2_conf.ini
继续修改：
[root@compute1 ~]# vim /etc/neutron/plugins/ml2/ml2_conf.ini
[ovs]
#改成自己的eth1地址
local_ip = 192.168.2.28.5 启动openvswitch并配置
[root@compute1 ~]# systemctl start openvswitch
[root@compute1 ~]# systemctl enable openvswitch
添加内部桥：
[root@compute1 ~]# ovs-vsctl add-br br-in8.6 修改nova配置文件
[root@compute1 ~]# vim /etc/nova/nova.conf
network_api_class=nova.network.neutronv2.api.API
neutron_url=http://controller:9696
neutron_auth_strategy=keystone
neutron_admin_tenant_name=service
neutron_admin_username=neutron
neutron_admin_password=neutron
neutron_admin_auth_url=http://controller:5000/v2.0
linuxnet_interface_driver=nova.network.linux_net.LinuxOVSInterfaceDriver
firewall_driver=nova.virt.firewall.NoopFirewallDriver
security_group_api=neutron8.7 启动服务
创建l2配置软链接
[root@compute1 ~]# ln -s /etc/neutron/plugins/ml2/ml2_conf.ini /etc/neutron/plugin.ini
重启compute1的nova服务：
[root@compute1 ~]# systemctl restart openstack-nova-compute
由于bug原因，需要修改openvswitch的init启动脚本
备份：
[root@compute1 ~]# rpm -ql openstack-neutron-openvswitch | grep agent.service
/usr/lib/systemd/system/neutron-openvswitch-agent.service
[root@compute1 ~]# cp /usr/lib/systemd/system/neutron-openvswitch-agent.service{,.orig}
启动neutron-agent服务:
[root@compute1 ~]# systemctl start neutron-openvswitch-agent
[root@compute1 ~]# systemctl enable neutron-openvswitch-agent
如果无法启动，请检查配置文件的属主属组权限，该服务是用neutron用户进行，如果配置文件用root用户拷贝，属主属组全是root将无法启动。默认权限是root:neutron(属组是neutron)
root@network1 ~]# ll /etc/neutron/plugins/ml2/ml2_conf.ini
-rw-r----- 1 root neutron 2567 May 2 16:21 /etc/neutron/plugins/ml2/ml2_conf.ini8.8 验证
在controller端使用网络命令
[root@controller ~]# neutron net-list
[root@controller ~]#
没有报错，默认为空
如果出现鉴权错误。请把neutron配置的auth_uri改成identity_uri 后重启neutron所有服务
[root@network1 ~]# for i in openvswitch l3 dhcp metadata;do systemctl restart neutron-${i}-agent;done
[root@compute1 ~]# systemctl restart neutron-openvswitch-agent
验证：
在compute1和network1加载用户环境文件
vim /~/.admin-openrc.sh
export OS_USERNAME=admin
export OS_PASSWORD=admin
export OS_TENANT_NAME=admin
export OS_AUTH_URL=http://controller:35357/v2.0
source /~/.admin-openrc.sh
然后运行neutron net-list服务没报错即可9、neutron配置网络
9.1 创建外部网络
创建外部网络：
[root@controller ~]# neutron net-create ext-net --shared --router:external=True
Created a new network:
+---------------------------+--------------------------------------+
| Field | Value |
+---------------------------+--------------------------------------+
| admin_state_up | True |
| id | 765c7736-23e1-4628-a30f-8c7a6b3fb112 |
| name | ext-net |
| provider:network_type | gre |
| provider:physical_network | |
| provider:segmentation_id | 1 |
| router:external | True |
| shared | True |
| status | ACTIVE |
| subnets | |
| tenant_id | abfe5df994e54c6190e98e3f3f3dab38 |
+---------------------------+--------------------------------------+
在上面的物理网络基础上创建subnet，并关闭DHCP，并指明分配地址范围，网关等（子网，三层）
[root@controller ~]# neutron subnet-create ext-net --name ext-subnet --allocation-pool start=10.201.106.150,end=10.201.106.180 --disable-dhcp --gateway 10.201.106.2 10.201.106.0/24
Created a new subnet:
+------------------+------------------------------------------------------+
| Field | Value |
+------------------+------------------------------------------------------+
| allocation_pools | {"start": "10.201.106.150", "end": "10.201.106.180"} |
| cidr | 10.201.106.0/24 |
| dns_nameservers | |
| enable_dhcp | False |
| gateway_ip | 10.201.106.2 |
| host_routes | |
| id | 4a1f4b34-c05d-4e0c-94a3-e793baf77903 |
| ip_version | 4 |
| name | ext-subnet |
| network_id | 8b1ce93e-d53f-4db8-9618-ea0e5a44c7e2 |
| tenant_id | abfe5df994e54c6190e98e3f3f3dab38 |
+------------------+------------------------------------------------------+
由于是用admin用户创建，所以tenantID为admin：
[root@controller ~]# keystone tenant-list
+----------------------------------+---------+---------+
| id | name | enabled |
+----------------------------------+---------+---------+
| abfe5df994e54c6190e98e3f3f3dab38 | admin | True |
| fbff77c905114d50b5be94ffd46203cd | demo | True |
| f9f13bac5d6f40449b2e4560ab16536d | service | True |
+----------------------------------+---------+---------+9.2 切换普通用户demo，管理网络
[root@controller ~]# cp .admin-openrc.sh .demo-os.sh
编辑demo变量：
[root@controller ~]# vim .demo-os.sh
export OS_USERNAME=demo
export OS_PASSWORD=demo
export OS_TENANT_NAME=demo
export OS_AUTH_URL=http://controller:35357/v2.0
激活变量
[root@controller ~]# source .demo-os.sh
查看网络：
[root@controller ~]# neutron net-list
+--------------------------------------+---------+------------------------------------------------------+
| id | name | subnets |
+--------------------------------------+---------+------------------------------------------------------+
| 765c7736-23e1-4628-a30f-8c7a6b3fb112 | ext-net | 9750a55a-1993-4e6a-a972-e91ffb700c08 10.201.106.0/24 |
+--------------------------------------+---------+------------------------------------------------------+9.3 demo用户创建管理网络
创建二层网络：
[root@controller ~]# neutron net-create ext-net --shared --router:external=True
Created a new network:
+---------------------------+--------------------------------------+
| Field | Value |
+---------------------------+--------------------------------------+
| admin_state_up | True |
| id | 8b1ce93e-d53f-4db8-9618-ea0e5a44c7e2 |
| name | ext-net |
| provider:network_type | gre |
| provider:physical_network | |
| provider:segmentation_id | 1 |
| router:external | True |
| shared | True |
| status | ACTIVE |
| subnets | |
| tenant_id | abfe5df994e54c6190e98e3f3f3dab38 |
+---------------------------+--------------------------------------+
在二层网络基础上创建三层子网（默认会提供DHCP服务）
[root@controller ~]# neutron subnet-create demo-net --name demo-subnet --gateway 192.168.3.254 192.168.3.0/24
Created a new subnet:
+------------------+--------------------------------------------------+
| Field | Value |
+------------------+--------------------------------------------------+
| allocation_pools | {"start": "192.168.3.1", "end": "192.168.3.253"} |
| cidr | 192.168.3.0/24 |
| dns_nameservers | |
| enable_dhcp | True |
| gateway_ip | 192.168.3.254 |
| host_routes | |
| id | 2e2902f4-a8e7-4468-b025-e3192c107c63 |
| ip_version | 4 |
| name | demo-subnet |
| network_id | 7f967a07-b98c-4684-ba2a-dd2ad4dc7171 |
| tenant_id | fbff77c905114d50b5be94ffd46203cd |
+------------------+--------------------------------------------------+9.3.1 手动创建router（路由器）
查看帮助：
[root@controller ~]# neutron help router-create
创建路由
[root@controller ~]# neutron router-create demo-router
Created a new router:
+-----------------------+--------------------------------------+
| Field | Value |
+-----------------------+--------------------------------------+
| admin_state_up | True |
| external_gateway_info | |
| id | 2f000bf3-cbc3-49b5-8470-9f5b4db54aa5 |
| name | demo-router |
| status | ACTIVE |
| tenant_id | fbff77c905114d50b5be94ffd46203cd |
+-----------------------+--------------------------------------+
路由器添加一个接口（网关），
[root@controller ~]# neutron router-interface-add demo-router demo-subnet
Added interface bdefa77a-4a7b-4fdc-8196-cfdd7337a822 to router demo-router.
[root@controller ~]# neutron port-list
+--------------------------------------+------+-------------------+--------------------------------------------------------------------------------------+
| id | name | mac_address | fixed_ips |
+--------------------------------------+------+-------------------+--------------------------------------------------------------------------------------+
| bdefa77a-4a7b-4fdc-8196-cfdd7337a822 | | fa:16:3e:5a:12:cf | {"subnet_id": "2e2902f4-a8e7-4468-b025-e3192c107c63", "ip_address": "192.168.3.254"} |
+--------------------------------------+------+-------------------+--------------------------------------------------------------------------------------+
将到路由器跟外部网桥关联（我的好像有bug，添加通过route-port-list命令没有看到分配的外网IP和接口。但是删除ext-subnet时又报错说有分配IP无法删除）：
[root@controller ~]# neutron router-gateway-set demo-router ext-net
Set gateway for router demo-router在network1节点查看：
[root@network1 ~]# ip netns list
qrouter-2f000bf3-cbc3-49b5-8470-9f5b4db54aa5
qrouter-eb098169-d68a-400e-ac5d-4b95bc6229b1
可以看到分配出去的IP10、Horizon（dashboard图形界面）
10.1 安装程序包
[root@controller ~]# yum install memcached python-memcached mod_wsgi openstack-dashboard10.2 启动memcached
[root@controller ~]# systemctl enable memcached
[root@controller ~]# systemctl start memcached
[root@controller ~]# netstat -tanp | grep memcached
tcp 0 0 0.0.0.0:11211 0.0.0.0:* LISTEN 25002/memcached
tcp6 0 0 :::11211 :::* LISTEN 25002/memcached10.3 配置dashboard
备份
[root@controller ~]# cp -p /etc/openstack-dashboard/local_settings{,.bak}
配置
[root@controller ~]# vim /etc/openstack-dashboard/local_settings
OPENSTACK_HOST = "controller"
#授权所有主机访问：
ALLOWED_HOSTS = ['*']
#禁用：
#CACHES = {
# 'default': {
# 'BACKEND' : 'django.core.cache.backends.locmem.LocMemCache'
# }
#}
#启动memcached
CACHES = {
'default': {
'BACKEND' : 'django.core.cache.backends.memcached.MemcachedCache',
'LOCATION' : '192.168.1.1:11211',
}
}
#时区
TIME_ZONE = "Asia/Chongqing"
启动httpd服务：
[root@controller ~]# systemctl start httpd
[root@controller ~]# systemctl enable httpd10.4 访问测试
浏览器访问：http://10.201.106.131/dashboard
用keystone的用户登录，这里用admin用户登录。
登录后界面：
demo用户登录：
10.5 图形界面无法连接到Neutron 问题解决
参考链接：
处理：
[root@controller ~]# vim /usr/share/openstack-dashboard/openstack_dashboard/api
def is_simple_associate_supported(self):
def is_supported(self):
network_config = getattr(settings, 'OPENSTACK_NEUTRON_NETWORK', {})
return network_config.get('enable_router', True)
重启web服务：
[root@controller ~]# systemctl restart httpd11、创建管理实例（虚拟机）
11.1 生成demo用户的密钥
加载demo用户变量：
[root@controller ~]# source .demo-os.sh
生成密钥和公钥，之前已经有了，不覆盖原来的：
[root@controller ~]# ssh-keygen -t rsa -P ''
Generating public/private rsa key pair.
Enter file in which to save the key (/root/.ssh/id_rsa):
/root/.ssh/id_rsa already exists.
Overwrite (y/n)? n
导入公钥：
[root@controller ~]# nova keypair-add --pub-key ~/.ssh/id_rsa.pub demokey
列出密钥对
[root@controller ~]# nova keypair-list
+---------+-------------------------------------------------+
| Name | Fingerprint |
+---------+-------------------------------------------------+
| demokey | 35:78:7f:bf:9f:75:d3:ef:7a:b1:ee:a2:7f:2f:e3:27 |
+---------+-------------------------------------------------+11.2 启动实例前准备
列出默认内置的flavor
[root@controller ~]# nova flavor-list
+----+-----------+-----------+------+-----------+------+-------+-------------+-----------+
| ID | Name | Memory_MB | Disk | Ephemeral | Swap | VCPUs | RXTX_Factor | Is_Public |
+----+-----------+-----------+------+-----------+------+-------+-------------+-----------+
| 1 | m1.tiny | 512 | 1 | 0 | | 1 | 1.0 | True |
| 2 | m1.small | 2048 | 20 | 0 | | 1 | 1.0 | True |
| 3 | m1.medium | 4096 | 40 | 0 | | 2 | 1.0 | True |
| 4 | m1.large | 8192 | 80 | 0 | | 4 | 1.0 | True |
| 5 | m1.xlarge | 16384 | 160 | 0 | | 8 | 1.0 | True |
+----+-----------+-----------+------+-----------+------+-------+-------------+-----------+
[root@control
创建一个自定义flavor：
切换admin用户：
[root@controller ~]# source .admin-openrc.sh
查看帮助：
[root@controller ~]# nova help flavor-create
创建：
[root@controller ~]# nova flavor-create --is-public true m1.cirros 6 128 1 1
+----+-----------+-----------+------+-----------+------+-------+-------------+-----------+
| ID | Name | Memory_MB | Disk | Ephemeral | Swap | VCPUs | RXTX_Factor | Is_Public |
+----+-----------+-----------+------+-----------+------+-------+-------------+-----------+
| 6 | m1.cirros | 128 | 1 | 0 | | 1 | 1.0 | True |
+----+-----------+-----------+------+-----------+------+-------+-------------+-----------+
[root@controller ~]# nova flavor-list | grep cirros
| 6 | m1.cirros | 128 | 1 | 0 | | 1 | 1.0 | True |
切换回demo：
[root@controller ~]# source .demo-os.sh
查看可以使用的磁盘映像文件：
[root@controller ~]# nova image-list
+--------------------------------------+---------------------+--------+--------+
| ID | Name | Status | Server |
+--------------------------------------+---------------------+--------+--------+
| 18a0019f-48e5-4f78-9f13-1166b4d53a12 | cirros-0.3.0-i386 | ACTIVE | |
| ca9993b8-91d5-44d1-889b-5496fd62114c | cirros-0.3.0-x86_64 | ACTIVE | |
+--------------------------------------+---------------------+--------+--------+如果普通用户看不到，需要用admin用户修改镜像的权限为公有，蛋（以后命令上传要加参数--is-public=true,之前把true写成ture了）疼：
查看自己可以使用的网络和subnet：
[root@controller ~]# nova net-list
+--------------------------------------+----------+------+
| ID | Label | CIDR |
+--------------------------------------+----------+------+
| 8b1ce93e-d53f-4db8-9618-ea0e5a44c7e2 | ext-net | - |
| 7f967a07-b98c-4684-ba2a-dd2ad4dc7171 | demo-net | - |
+--------------------------------------+----------+------+
[root@controller ~]# neutron subnet-list
+--------------------------------------+-------------+-----------------+------------------------------------------------------+
| id | name | cidr | allocation_pools |
+--------------------------------------+-------------+-----------------+------------------------------------------------------+
| 4a1f4b34-c05d-4e0c-94a3-e793baf77903 | ext-subnet | 10.201.106.0/24 | {"start": "10.201.106.150", "end": "10.201.106.180"} |
| 2e2902f4-a8e7-4468-b025-e3192c107c63 | demo-subnet | 192.168.3.0/24 | {"start": "192.168.3.1", "end": "192.168.3.253"} |
+--------------------------------------+-------------+-----------------+------------------------------------------------------+
查看可用的安全组
[root@controller ~]# nova secgroup-list
+--------------------------------------+---------+-------------+
| Id | Name | Description |
+--------------------------------------+---------+-------------+
| 3b28dbde-1640-4043-81c9-d01cb822020b | default | default |
+--------------------------------------+---------+-------------+
查看组内角色规则：
[root@controller ~]# nova secgroup-list-rules default
+-------------+-----------+---------+----------+--------------+
| IP Protocol | From Port | To Port | IP Range | Source Group |
+-------------+-----------+---------+----------+--------------+
| | | | | default |
| | | | | default |
+-------------+-----------+---------+----------+--------------+11.3 正式启动虚拟机实例（加入网络需要网络的ID号）
[root@controller ~]# nova boot --flavor m1.cirros --image cirros-0.3.0-i386 --key-name demokey --nic net-id=7f967a07-b98c-4684-ba2a-dd2ad4dc7171 --security-group default demo-0001
+--------------------------------------+----------------------------------------------------------+
| Property | Value |
+--------------------------------------+----------------------------------------------------------+
| OS-DCF:diskConfig | MANUAL |
| OS-EXT-AZ:availability_zone | nova |
| OS-EXT-STS:power_state | 0 |
| OS-EXT-STS:task_state | scheduling |
| OS-EXT-STS:vm_state | building |
| OS-SRV-USG:launched_at | - |
| OS-SRV-USG:terminated_at | - |
| accessIPv4 | |
| accessIPv6 | |
| adminPass | vNpTGgs6uzDq |
| config_drive | |
| created | 2018-05-03T09:43:51Z |
| flavor | m1.cirros (6) |
| hostId | |
| id | f5a4aec6-100e-482c-9944-b319189facba |
| image | cirros-0.3.0-i386 (18a0019f-48e5-4f78-9f13-1166b4d53a12) |
| key_name | demokey |
| metadata | {} |
| name | demo-0001 |
| os-extended-volumes:volumes_attached | [] |
| progress | 0 |
| security_groups | default |
| status | BUILD |
| tenant_id | fbff77c905114d50b5be94ffd46203cd |
| updated | 2018-05-03T09:43:52Z |
| user_id | 472d9776f8984bb99a728985760ad5ba |
+--------------------------------------+----------------------------------------------------------+
查看实例状态：
[root@controller ~]# nova list
+--------------------------------------+-----------+--------+------------+-------------+----------+
| ID | Name | Status | Task State | Power State | Networks |
+--------------------------------------+-----------+--------+------------+-------------+----------+
| f5a4aec6-100e-482c-9944-b319189facba | demo-0001 | BUILD | spawning | NOSTATE | |
+--------------------------------------+-----------+--------+------------+-------------+----------+
过了一段时间，终于创建好了：
[root@controller ~]# nova list
+--------------------------------------+-----------+--------+------------+-------------+----------------------+
| ID | Name | Status | Task State | Power State | Networks |
+--------------------------------------+-----------+--------+------------+-------------+----------------------+
| f5a4aec6-100e-482c-9944-b319189facba | demo-0001 | ACTIVE | - | Running | demo-net=192.168.3.1 |
+--------------------------------------+-----------+--------+------------+-------------+----------------------+
如果无法启动，检查下compute和network1节点的neutron-openvswitch-agent有没有启动
查看VNC访问地址：
[root@controller ~]# nova get-vnc-console demo-0001 novnc
+-------+---------------------------------------------------------------------------------+
| Type | Url |
+-------+---------------------------------------------------------------------------------+
| novnc | http://controller:6080/vnc_auto.html?token=c72f7bc4-e7f4-47b1-b4e5-362fcb9811c3 |
+-------+---------------------------------------------------------------------------------+
通过浏览器访问：http://controller:6080/vnc_auto.html?token=c72f7bc4-e7f4-47b1-b4e5-362fcb9811c311.5 安全组设置
开启安全组ping功能：
[root@controller ~]# source .admin-openrc.sh
[root@controller ~]# nova secgroup-add-rule default icmp -1 -1 0.0.0.0/0
+-------------+-----------+---------+-----------+--------------+
| IP Protocol | From Port | To Port | IP Range | Source Group |
+-------------+-----------+---------+-----------+--------------+
| icmp | -1 | -1 | 0.0.0.0/0 | |
+-------------+-----------+---------+-----------+--------------+
转载于:https://blog.51cto.com/zhongle21/2112475
本文章为转载内容，我们尊重原作者对文章享有的著作权。如有内容错误或侵权问题，欢迎原作者联系我们进行内容更正或删除文章。
