Android 蓝牙BLE发送数据
1. 引言
蓝牙低功耗(Bluetooth Low Energy,简称BLE)是一种用于短距离通信的无线技术,它被广泛应用于物联网(IoT)设备和移动应用中。在Android平台上,我们可以使用Android的BLE API来实现与BLE设备的通信。本文将介绍如何在Android上使用BLE API发送数据给BLE设备。
2. 准备工作
在开始之前,确保你已经准备好以下工作:
- 一台运行Android 4.3(API Level 18)或更高版本的设备或模拟器
- Android开发环境,包括Android Studio和SDK
3. 添加权限和依赖项
首先,在你的Android项目中的AndroidManifest.xml
文件中添加以下权限:
<uses-permission android:name="android.permission.BLUETOOTH"/>
<uses-permission android:name="android.permission.BLUETOOTH_ADMIN"/>
然后,在你的项目的build.gradle
文件中添加以下依赖项:
implementation 'com.android.support:appcompat-v7:28.0.0'
implementation 'org.altbeacon:android-beacon-library:2.15.1'
4. 初始化BLE适配器
在开始使用BLE API之前,我们需要初始化BLE适配器。在你的Activity或Fragment的onCreate()
方法中,添加以下代码:
BluetoothManager bluetoothManager = (BluetoothManager) getSystemService(Context.BLUETOOTH_SERVICE);
BluetoothAdapter bluetoothAdapter = bluetoothManager.getAdapter();
if (bluetoothAdapter == null || !bluetoothAdapter.isEnabled()) {
// 如果设备不支持蓝牙或蓝牙未打开,则提示用户打开蓝牙
Intent enableBtIntent = new Intent(BluetoothAdapter.ACTION_REQUEST_ENABLE);
startActivityForResult(enableBtIntent, REQUEST_ENABLE_BT);
}
5. 扫描并连接BLE设备
要与BLE设备通信,我们首先需要扫描并连接到BLE设备。在你的Activity或Fragment中,添加以下代码:
private BluetoothLeScanner bluetoothLeScanner;
private ScanCallback scanCallback;
private void startScan() {
bluetoothLeScanner = bluetoothAdapter.getBluetoothLeScanner();
scanCallback = new ScanCallback() {
@Override
public void onScanResult(int callbackType, ScanResult result) {
// 处理扫描到的设备
}
};
bluetoothLeScanner.startScan(scanCallback);
}
private void stopScan() {
bluetoothLeScanner.stopScan(scanCallback);
}
private void connectToDevice(BluetoothDevice device) {
BluetoothGatt bluetoothGatt = device.connectGatt(this, false, gattCallback);
}
private BluetoothGattCallback gattCallback = new BluetoothGattCallback() {
// 处理连接状态改变、服务发现、特征值读写等事件
// ...
};
6. 发送数据给BLE设备
一旦与BLE设备成功连接,我们就可以发送数据给BLE设备了。下面是一个例子:
private BluetoothGattCharacteristic characteristic;
private void writeToCharacteristic(byte[] data) {
if (characteristic != null) {
characteristic.setValue(data);
bluetoothGatt.writeCharacteristic(characteristic);
}
}
@Override
public void onCharacteristicWrite(BluetoothGatt gatt, BluetoothGattCharacteristic characteristic, int status) {
if (status == BluetoothGatt.GATT_SUCCESS) {
// 数据发送成功
} else {
// 数据发送失败
}
}
7. 总结
通过Android的BLE API,我们可以轻松地与BLE设备进行通信。本文介绍了如何初始化BLE适配器、扫描并连接BLE设备,并发送数据给BLE设备。希望本文对你了解Android蓝牙BLE发送数据有所帮助。
8. 附录:甘特图
gantt
title Android蓝牙BLE发送数据甘特图
dateFormat YYYY-MM-DD
section 准备工作
计划准备工作 :done, 2022-10-01, 1d
添加权限和依赖项 :done, 2022-10-02, 1d
section BLE通信
初始化BLE适配器 :done, 2022-10-03, 1d
扫描并连接BLE设备 :done, 2022-10-04, 2d
发送