ddn与MPLS的区别

前言

鸽了好久没更了，主要是刚入学学业压力还蛮大，挺忙的，没时间总结啥东西。

接下来就要好好搞科研啦。先来学习一篇diffusion的经典之作Denoising Diffusion Probabilistic Models(DDPM)。

先不断前向加高斯噪声，这一步骤称为前向过程。然后就是利用模型不断预测加噪前的图片，从而还原出原图像。

DDPM重要公式

由于有些公式推导过程可能较长，我会把它放到【推导】部分，至于【提纲】部分则会列出简洁的重要的公式。

提纲

(1) 前向加噪
$q(X_t|X_{t-1}) = N(X_t;\sqrt{1-\beta_t}X_{t-1}, \beta_t I)$

$\beta_t$ 在 DDPM中是0到1的小数，并且满足 $\beta_1 \lt \beta_2 \lt ... \lt \beta_T$

(2)
$q(X_t|X_0) = N(X_t; \sqrt{\overline{\alpha}_t}X_0, (1-\overline{\alpha}_t)I)$
或者写为
$X_t = \sqrt{\overline{\alpha}_t}X_0+\sqrt{1-\overline{\alpha}_t}~\epsilon$
其中, $\alpha_t$ 定义为 $1-\beta_t$, 不要问 $\alpha_t + \beta_t$ 为何为1, 因为我们就是定义来的，定义 $\alpha$

(3) 后验的均值和方差
即 $q(X_{t-1}|X_t, X_0)$ 的均值 $\widetilde{\mu}(X_t, X_0)$ 以及方差 $\widetilde{\beta}_t$ 分别为
$\widetilde{\mu}(X_t, X_0) = \frac{\sqrt{\overline{\alpha}_{t-1}}}{1-\overline{\alpha}_t} X_0 + \frac{\sqrt{\alpha_t}(1-\overline{\alpha}_{t-1})}{1-\overline{\alpha}_{t}}X_t$
$\widetilde{\beta}_t = \frac{1-\overline{\alpha}_{t-1}}{1-\overline{\alpha}_t} \beta_t$

另外根据公式 (2) , 利用 $X_0$与 $X_t$的关系，有 $X_0=\frac{1}{\sqrt{\overline{\alpha}_t}}(X_t-\sqrt{1-\overline{\alpha}_t}~~\epsilon_t)$, 带入到上式中，得到
$\widetilde{\mu}(X_t, X_0) = \frac{1}{\sqrt{\overline{\alpha}_t}}(X_t-\frac{\beta_t}{\sqrt{1-\overline{\alpha}_t}}\epsilon_t)$

推导

主要参考 deep thoughts-关于第54期视频去噪概率扩散模型DDPM的更新版notebook分享

由于

DDPM 训练和采样

原论文总结得很好，直接抄下hh

DDPM S_curve数据集小demo

声明: 暂时找不到原始出处，这是根据一个开源项目来的。
如果有小伙伴知道原始出处在哪，请麻烦留言，我后续会补上。
同时声明该案例只用于学习!!

数据集加载

import matplotlib.pyplot as plt
import numpy as np
from sklearn.datasets import make_s_curve
import torch

s_curve,_ = make_s_curve(10**4,noise=0.1)
s_curve = s_curve[:,[0,2]]/10.0

print("shape of s:",np.shape(s_curve))

data = s_curve.T

fig,ax = plt.subplots()
ax.scatter(*data,color='blue',edgecolor='white');

ax.axis('off')

device = 'cuda' if torch.cuda.is_available() else 'cpu'

dataset = torch.Tensor(s_curve).float().to(device)

shape of s: (10000, 2)

确定超参数的值(important)

接下来主要是算出一些有用的量。

num_steps = 100

#制定每一步的beta
betas = torch.linspace(-6,6,num_steps).to(device)
betas = torch.sigmoid(betas)*(0.5e-2 - 1e-5)+1e-5

#计算alpha、alpha_prod、alpha_prod_previous、alpha_bar_sqrt等变量的值
alphas = 1-betas
alphas_prod = torch.cumprod(alphas,0)
alphas_prod_p = torch.cat([torch.tensor([1]).float().to(device),alphas_prod[:-1]],0)
alphas_bar_sqrt = torch.sqrt(alphas_prod)
one_minus_alphas_bar_log = torch.log(1 - alphas_prod)
one_minus_alphas_bar_sqrt = torch.sqrt(1 - alphas_prod)

assert alphas.shape==alphas_prod.shape==alphas_prod_p.shape==\
alphas_bar_sqrt.shape==one_minus_alphas_bar_log.shape\
==one_minus_alphas_bar_sqrt.shape
print("all the same shape",betas.shape)

噪声方案

#制定每一步的beta
betas = torch.linspace(-6,6,num_steps).to(device)
betas = torch.sigmoid(betas)*(0.5e-2 - 1e-5)+1e-5

注意一下很多变量都是列表。
$\alpha_t = 1-\beta_t$

alphas = 1-betas

$\overline{\alpha}_t = \prod_{i=0}^n \alpha_i$

alphas_prod = torch.cumprod(alphas, dim=0)

$\alpha_{t-1}$

alphas_prod_p = torch.cat([torch.tensor([1]).float().to(device),alphas_prod[:-1]],0)

$\sqrt{\overline{\alpha}_t}$

alphas_bar_sqrt = torch.sqrt(alphas_prod)

$log(1-\overline{\alpha}_t)$

one_minus_alphas_bar_log = torch.log(1 - alphas_prod)

one_minus_alphas_bar_sqrt对应 $\sqrt{1-\overline{\alpha}_t}$

one_minus_alphas_bar_sqrt = torch.sqrt(1 - alphas_prod)

前向过程采样(important)

$X_t = \sqrt{\overline{\alpha}_t}X_0+\sqrt{1-\overline{\alpha}_t}~\epsilon$

#计算任意时刻的x采样值，基于x_0和重参数化
def q_x(x_0,t):
    """可以基于x[0]得到任意时刻t的x[t]"""
    noise = torch.randn_like(x_0).to(device)
    alphas_t = alphas_bar_sqrt[t]
    alphas_1_m_t = one_minus_alphas_bar_sqrt[t]
    return (alphas_t * x_0 + alphas_1_m_t * noise)#在x[0]的基础上添加噪声

演示数据前向100步的结果

num_shows = 20
fig,axs = plt.subplots(2,10,figsize=(28,3))
plt.rc('text',color='black')

#共有10000个点，每个点包含两个坐标
#生成100步以内每隔5步加噪声后的图像
for i in range(num_shows):
    j = i//10
    k = i%10
    q_i = q_x(dataset, torch.tensor([i*num_steps//num_shows]).to(device))#生成t时刻的采样数据
    q_i = q_i.to('cpu')
    axs[j,k].scatter(q_i[:,0],q_i[:,1],color='red',edgecolor='white')
    axs[j,k].set_axis_off()
    axs[j,k].set_title('$q(\mathbf{x}_{'+str(i*num_steps//num_shows)+'})$')

模型

import torch
import torch.nn as nn

class MLPDiffusion(nn.Module):
    def __init__(self,n_steps,num_units=128):
        super(MLPDiffusion,self).__init__()
        
        self.linears = nn.ModuleList(
            [
                nn.Linear(2,num_units),
                nn.ReLU(),
                nn.Linear(num_units,num_units),
                nn.ReLU(),
                nn.Linear(num_units,num_units),
                nn.ReLU(),
                nn.Linear(num_units,2),
            ]
        )
        self.step_embeddings = nn.ModuleList(
            [
                nn.Embedding(n_steps,num_units),
                nn.Embedding(n_steps,num_units),
                nn.Embedding(n_steps,num_units),
            ]
        )
    def forward(self,x,t):
#         x = x_0
        for idx,embedding_layer in enumerate(self.step_embeddings):
            t_embedding = embedding_layer(t)
            x = self.linears[2*idx](x)
            x += t_embedding
            x = self.linears[2*idx+1](x)
            
        x = self.linears[-1](x)
        
        return x

损失函数(important)

由于DDPM中方差被设置为定值，因此这里只需要比较均值的loss, 又因为DDPM是预测噪声，因为只要比较后验的噪声和模型预测的噪声的MSE loss就可以指导模型进行训练了。

def diffusion_loss_fn(model,x_0,alphas_bar_sqrt,one_minus_alphas_bar_sqrt,n_steps):
    """对任意时刻t进行采样计算loss"""
    batch_size = x_0.shape[0]
    
    #对一个batchsize样本生成随机的时刻t
    t = torch.randint(0,n_steps,size=(batch_size//2,)).to(device)
    t = torch.cat([t,n_steps-1-t],dim=0)
    t = t.unsqueeze(-1)
    
    #x0的系数
    a = alphas_bar_sqrt[t]
    
    #eps的系数
    aml = one_minus_alphas_bar_sqrt[t]
    
    #生成随机噪音eps
    e = torch.randn_like(x_0).to(device)
    
    #构造模型的输入
    x = x_0 * a + e * aml
    
    #送入模型，得到t时刻的随机噪声预测值
    output = model(x,t.squeeze(-1))
    
    #与真实噪声一起计算误差，求平均值
    return (e - output).square().mean()

其中 $X_t = \sqrt{\overline{\alpha}_t}X_0+\sqrt{1-\overline{\alpha}_t}~\epsilon$， 即为代码中的

x = x_0 * a + e * aml

逆过程采样(important)

p_sample_loop负责迭代式的调用p_sample, 是不断恢复图像的过程。

def p_sample_loop(model,shape,n_steps,betas,one_minus_alphas_bar_sqrt):
    """从x[T]恢复x[T-1]、x[T-2]|...x[0]"""
    cur_x = torch.randn(shape).to(device)
    x_seq = [cur_x]
    for i in reversed(range(n_steps)):
        cur_x = p_sample(model,cur_x,i,betas,one_minus_alphas_bar_sqrt)
        x_seq.append(cur_x)
    return x_seq

def p_sample(model,x,t,betas,one_minus_alphas_bar_sqrt):
    """从x[T]采样t时刻的重构值"""
    t = torch.tensor([t]).to(device)
    coeff = betas[t] / one_minus_alphas_bar_sqrt[t]
    eps_theta = model(x,t)
    mean = (1/(1-betas[t]).sqrt())*(x-(coeff*eps_theta))
    z = torch.randn_like(x).to(device)
    sigma_t = betas[t].sqrt()
    sample = mean + sigma_t * z
    return (sample)

这里 $X_{t-1} = \widetilde{\mu} + \sqrt{\beta_t} z$ (DDPM不学习方差，方差直接设置为$\beta$, 所以标准差就是 $\sqrt{\beta_t}$, 其中 z是随机生成的噪声)
$\widetilde{\mu}(X_t, X_0) = \frac{1}{\sqrt{\overline{\alpha}_t}}(X_t-\frac{\beta_t}{\sqrt{1-\overline{\alpha}_t}}\epsilon_t)$

coeff = betas[t] / one_minus_alphas_bar_sqrt[t]
eps_theta = model(x,t)
mean = (1/(1-betas[t]).sqrt())*(x-(coeff*eps_theta))

one_minus_alphas_bar_sqrt对应 $\sqrt{1-\overline{\alpha}_t}$

模型训练

seed = 1234
    
print('Training model...')
batch_size = 128
dataloader = torch.utils.data.DataLoader(dataset,batch_size=batch_size,shuffle=True)
num_epoch = 4000
plt.rc('text',color='blue')

model = MLPDiffusion(num_steps)#输出维度是2，输入是x和step
model = model.cuda()
optimizer = torch.optim.Adam(model.parameters(),lr=1e-3)

for t in range(num_epoch):
    for idx,batch_x in enumerate(dataloader):
        loss = diffusion_loss_fn(model,batch_x,alphas_bar_sqrt,one_minus_alphas_bar_sqrt,num_steps)
        optimizer.zero_grad()
        loss.backward()
        torch.nn.utils.clip_grad_norm_(model.parameters(),1.)
        optimizer.step()
        
    if(t%100==0):
        print(loss)
        x_seq = p_sample_loop(model,dataset.shape,num_steps,betas,one_minus_alphas_bar_sqrt)
        
        x_seq = [item.to('cpu') for item in x_seq]
        fig,axs = plt.subplots(1,10,figsize=(28,3))
        for i in range(1,11):
            cur_x = x_seq[i*10].detach()
            axs[i-1].scatter(cur_x[:,0],cur_x[:,1],color='red',edgecolor='white');
            axs[i-1].set_axis_off();
            axs[i-1].set_title('$q(\mathbf{x}_{'+str(i*10)+'})$')

Training model…
tensor(0.5281, device=‘cuda:0’, grad_fn=)
tensor(0.6795, device=‘cuda:0’, grad_fn=)
tensor(0.3125, device=‘cuda:0’, grad_fn=)
tensor(0.3071, device=‘cuda:0’, grad_fn=)
tensor(0.2241, device=‘cuda:0’, grad_fn=)
tensor(0.3483, device=‘cuda:0’, grad_fn=)
tensor(0.4395, device=‘cuda:0’, grad_fn=)
tensor(0.3733, device=‘cuda:0’, grad_fn=)
tensor(0.6234, device=‘cuda:0’, grad_fn=)
tensor(0.2991, device=‘cuda:0’, grad_fn=)
tensor(0.3027, device=‘cuda:0’, grad_fn=)
tensor(0.3399, device=‘cuda:0’, grad_fn=)
tensor(0.2055, device=‘cuda:0’, grad_fn=)
tensor(0.4996, device=‘cuda:0’, grad_fn=)
tensor(0.4738, device=‘cuda:0’, grad_fn=)
tensor(0.1580, device=‘cuda:0’, grad_fn=)
…

好多个epoch之后be like:

动画演示

import io
from PIL import Image

imgs = []
for i in range(100):
    plt.clf()
    q_i = q_x(dataset,torch.tensor([i]))
    plt.scatter(q_i[:,0],q_i[:,1],color='red',edgecolor='white',s=5);
    plt.axis('off');
    
    img_buf = io.BytesIO()
    plt.savefig(img_buf,format='png')
    img = Image.open(img_buf)
    imgs.append(img)

reverse = []
for i in range(100):
    plt.clf()
    cur_x = x_seq[i].detach()
    plt.scatter(cur_x[:,0],cur_x[:,1],color='red',edgecolor='white',s=5);
    plt.axis('off')
    
    img_buf = io.BytesIO()
    plt.savefig(img_buf,format='png')
    img = Image.open(img_buf)
    reverse.append(img)

保存为gif

imgs = imgs + reverse
imgs[0].save("diffusion.gif",format='GIF',append_images=imgs,save_all=True,duration=100,loop=0)