Zabbix Server端配置文件说明

# This is a configuration file for Zabbix Server process

# To get more information about Zabbix,
# visit http://www.zabbix.com
############ GENERAL PARAMETERS #################
### Option: NodeID
#   Unique NodeID in distributed setup.
#   0 - standalone server
#
# Mandatory: no
# Range: 0-999
# Default:
#**说明：**服务端节点Id，0表示只有一台服务端；主要用于服务端分布式部
署时,视使用者设计ZABBIX系统架构调整  
# NodeID=0
### Option: ListenPort
#   Listen port for trapper.
#
# Mandatory: no
# Range: 1024-32767
# Default:
#**说明**:服务端监听端口用于接收二级代理或直连AGENT的采集数据  

# ListenPort=10051

### Option: SourceIP
#   Source IP address for outgoing connections.
#
# Mandatory: no
# Default:
#**说明：**服务端监听IP，建议指定  
# SourceIP=
### Option: LogFile
#   Name of log file.
#   If not set, syslog is used.
#
# Mandatory: no
# Default:
# LogFile=
#**说明：**zabbix服务端日志路径，视具体情况指定       
LogFile=/smp/sncmon/zabbix_server.log
### Option: LogFileSize
#   Maximum size of log file in MB.
#   0 - disable automatic log rotation.
#
# Mandatory: no
# Range: 0-1024
# Default:
#**说明：**日志达到多少M里就轮转；若此参数值为0时，则不轮转，日志将
不断变大，建议设置成轮转  
# LogFileSize=1
### Option: DebugLevel
#   Specifies debug level
#   0 - no debug 无日志
#   1 - critical information  灾难日志，日志量较少
#   2 - error information  错误级别，日志量大于CRITICAL级别
#   3 - warnings    告警级别，日志量大于ERROR级别
#   4 - for debugging (produces lots of information)调试级别，
日志量大于WARNING
#  
# Mandatory: no
# Range: 0-4
# Default:
#**说明：**日志级别0~4，单位时间内生成日志的量不断增大  
# DebugLevel=3
### Option: PidFile
#   Name of PID file.
#
# Mandatory: no
# Default:
#**说明：**zabbix服务端程序PID路径  
# PidFile=/tmp/zabbix_server.pid
### Option: DBHost
#   Database host name.
#   If set to localhost, socket is used for MySQL.
#   If set to empty string, socket is used for PostgreSQL.
#
# Mandatory: no
# Default:
#**说明：**指定数据库信息，对于mysql，若设置为localhost则mysql用
SOCKET来连接(需配合参数 DBSocket 使用)，否则用IP连接；若
DHHOST值为空,则默认连接PostgreSQL  
# DBHost=localhost
### Option: DBName
#   Database name.
#   For SQLite3 path to database file must be provided.  DBUser and DBPassword are ignored.
#
# Mandatory: yes
# Default:
# DBName=
#**说明：**服务端连接数据库的库名   DBName=smp
### Option: DBSchema
#   Schema name. Used for IBM DB2.
#
# Mandatory: no
# Default:
#**说明：**专门用于 IBM DB2数据库的连接信息  
# DBSchema=
### Option: DBUser
#   Database user. Ignored for SQLite.
#
# Mandatory: no
# Default:
#**说明：**连接数据库的用户  
# DBUser= DBUser=root
### Option: DBPassword
#   Database password. Ignored for SQLite.
#   Comment this line if no password is used.
#
# Mandatory: no
# Default:
#**说明：**连接数据库的密码   DBPassword=123
### Option: DBSocket
#   Path to MySQL socket.
#
# Mandatory: no
# Default:
#**说明：**指定MYSQL的SOCK连接路径  
# DBSocket=/tmp/mysql.sock
### Option: DBPort
#   Database port when not using local socket. Ignored for SQLite.
#
# Mandatory: no
# Range: 1024-65535
# Default (for MySQL):
#**说明：**指定连接数据库的端口   DBPort=3306
############ ADVANCED PARAMETERS ################
#高级参数
### Option: StartPollers
#   Number of pre-forked instances of pollers.
#
# Mandatory: no
# Range: 0-1000
# Default:
#说明;初始化时，启动子进程数量，数量越多，则服务端吞吐能力越强，
对系统资源消耗越大
# StartPollers=5
### Option: StartIPMIPollers
#   Number of pre-forked instances of IPMI pollers.
#
# Mandatory: no
# Range: 0-1000
# Default:
#
#说明:主要用于IPmi技术用于获取硬件状态场景。若无相关监控项，
建议设置为0
# StartIPMIPollers=0
### Option: StartPollersUnreachable
#   Number of pre-forked instances of pollers for unreachable hosts (including IPMI).
#
# Mandatory: no
# Range: 0-1000
# Default:
#**说明：**默认情况下，ZABBIX会启用指定进程用于探测某些不可达主机的
（含IPMI场景）；若使用场景中含有代理端，建议保持默认；
若直接agent较多，可视具体情况调整
# StartPollersUnreachable=1
### Option: StartTrappers
#   Number of pre-forked instances of trappers.
#   Trappers accept incoming connections from Zabbix sender, active agents, active proxies and child nodes.
#   At least one trapper process must be running to display server availability in the frontend.
#
# Mandatory: no
# Range: 0-1000
# Default: 
**加粗样式**说明：用于设置诸如SNMP STRAPPER场景提交
来的数据的接收进程数，若客户机SNMP TRAPPER技术较多，
建议加大此参数值
# StartTrappers=5
### Option: StartPingers
#   Number of pre-forked instances of ICMP pingers.
#
# Mandatory: no
# Range: 0-1000
# Default:
#**说明：**用于设置启用icmp协议PING主机方式启动线程数量，若单台
代理所管理机器超过500台，建议加大此数值
# StartPingers=1
### Option: StartDiscoverers
#   Number of pre-forked instances of discoverers.
#
# Mandatory: no
# Range: 0-250
# Default: 
**说明**：用于设置自动发现主机的线程数量，若单台代理所
管理机器超过500台，可以考虑加大此数值（仅适用于直接AGENT场景）
# StartDiscoverers=1
### Option: StartHTTPPollers
#   Number of pre-forked instances of HTTP pollers.
#
# Mandatory: no
# Range: 0-1000
# Default:
#**说明：**用于设置WEB拨测监控线程数，可视具体情况增加或减少此数值。
# StartHTTPPollers=1
### Option: StartTimers
#   Number of pre-forked instances of timers.
#   Timers process time-based trigger functions and maintenance periods.
#   Only the first timer process handles the maintenance periods.
#
# Mandatory: no
# Range: 1-1000
# Default:
#**说明：**各实例计时器数量，主要用于触发器，标有维护标识的主机，但只
第一个计时器用于计算维护标识主机。
# StartTimers=1
### Option: JavaGateway
#   IP address (or hostname) of Zabbix Java gateway.
#   Only required if Java pollers are started.
#
# Mandatory: no
# Default:
#**说明：**JAVAGATEWAY 场景下使用
# JavaGateway=
### Option: JavaGatewayPort
#   Port that Zabbix Java gateway listens on.
#
# Mandatory: no
# Range: 1024-32767
# Default:
#**说明：**JAVAGATEWAY 场景下使用
# JavaGatewayPort=10052
### Option: StartJavaPollers
#   Number of pre-forked instances of Java pollers.
#
# Mandatory: no
# Range: 0-1000
# Default:
#**说明：**JAVAGATEWAY 场景下使用
# StartJavaPollers=0
### Option: StartVMwareCollectors
#   Number of pre-forked vmware collector instances.
#
# Mandatory: no
# Range: 0-250
# Default:
#**说明：**用于设置监控VMWARE Esxi主机实例时使用，若为0则不启用，
若要监控ESXI主机，此值最少为1 ；视监控ESXI数量设置对应数值
# StartVMwareCollectors=0
### Option: VMwareFrequency
#   How often Zabbix will connect to VMware service to obtain a new data.
#
# Mandatory: no
# Range: 10-86400
# Default:
#**说明：**代理端访问 VMWARE service的频率，单位:秒
# VMwareFrequency=60
### Option: VMwareCacheSize
#   Size of VMware cache, in bytes.
#   Shared memory size for storing VMware data.
#   Only used if VMware collectors are started.
#
# Mandatory: no
# Range: 256K-2G
# Default:
#**说明：**划出多少共享内存用于存储VMWARE数据
# VMwareCacheSize=8M
### Option: SNMPTrapperFile
#   Temporary file used for passing data from SNMP trap daemon to the server.
#   Must be the same as in zabbix_trap_receiver.pl or SNMPTT configuration file.
#
# Mandatory: no
# Default:
#**说明：**指定SNMP TRAPPER 时的临时文件，用于代理端启用SNMP TRAPPER功能时使用
# SNMPTrapperFile=/tmp/zabbix_traps.tmp
### Option: StartSNMPTrapper
#   If 1, SNMP trapper process is started.
#
# Mandatory: no
# Range: 0-1
# Default:
#**说明：**是否启用 snmptrapper功能 ，默认不启用=0，启用=1（配合参数SNMPTrapperFile使用）
# StartSNMPTrapper=0
### Option: ListenIP
#   List of comma delimited IP addresses that the trapper should listen on.
#   Trapper will listen on all network interfaces if this parameter is missing.
#
# Mandatory: no
# Default: 
**说明**：启用SNMPTRAPPER里 ，接收端监听的IP，此参数与StartSNMPTrapper，SNMPTrapperFile 联合使用
# ListenIP=0.0.0.0
# ListenIP=127.0.0.1
### Option: HousekeepingFrequency
#   How often Zabbix will perform housekeeping procedure (in hours).
#   Housekeeping is removing unnecessary information from history, alert, and alarms tables.
#
# Mandatory: no
# Range: 1-24
# Default:
#**说明：**多少小时清理一次代理端数据库的 history, alert, and alarms，以保持代理端数据库轻便，建议保持默认
# HousekeepingFrequency=1
### Option: MaxHousekeeperDelete
#   The table "housekeeper" contains "tasks" for housekeeping procedure in the format:
#   [housekeeperid], [tablename], [field], [value].
#   No more than 'MaxHousekeeperDelete' rows (corresponding to [tablename], [field], [value])
#   will be deleted per one task in one housekeeping cycle.
#   SQLite3 does not use this parameter, deletes all corresponding rows without a limit.
#   If set to 0 then no limit is used at all. In this case you must know what you are doing!
#
# Mandatory: no
# Range: 0-1000000
# Default:
# MaxHousekeeperDelete=500
### Option: SenderFrequency
#   How often Zabbix will try to send unsent alerts (in seconds).
#
# Mandatory: no
# Range: 5-3600
# Default:
#说明:多少秒后重试发送失败的报警信息
# SenderFrequency=30
### Option: CacheSize
#   Size of configuration cache, in bytes.
#   Shared memory size for storing host, item and trigger data.
#
# Mandatory: no
# Range: 128K-2G
# Default:
#说明;zabbix初始化时占用多少系统共享内存用于存储配置信息，HOST,ITEM,TRIGGER数据，视监控主机数量和监控项调整，建议调整到32M或者更大
# CacheSize=8M
### Option: CacheUpdateFrequency
#   How often Zabbix will perform update of configuration cache, in seconds.
#
# Mandatory: no
# Range: 1-3600
# Default:
#**说明：**zabbix更新操作系统CACHE频率，若管理页面操作不频繁，可以考虑加大参数值
# CacheUpdateFrequency=60
### Option: StartDBSyncers
#   Number of pre-forked instances of DB Syncers
#
# Mandatory: no
# Range: 1-100
# Default:
#说明:将采集数据从CACHE同步到数据库线程数量，视数据库服务器I/O繁忙情况，和数据库写能力调整。数值越大，写能力越强。对数据库服务器I/O压力越大。
# StartDBSyncers=4
### Option: HistoryCacheSize
#   Size of history cache, in bytes.
#   Shared memory size for storing history data.
#
# Mandatory: no
# Range: 128K-2G
# Default:
#**说明：**用于设置划分多少系统共享内存用于存储采集的历史数据，此数值越大，数据库读压力越小
# HistoryCacheSize=8M
### Option: TrendCacheSize
#   Size of trend cache, in bytes.
#   Shared memory size for storing trends data.
#
# Mandatory: no
# Range: 128K-2G
# Default:
#**说明：**用于设置划分多少系统共享内存用于存储计算出来的趋势数据，此参数值从一定程度上可影响数据库读压力
# TrendCacheSize=4M
### Option: HistoryTextCacheSize
#   Size of text history cache, in bytes.
#   Shared memory size for storing character, text or log history data.
#
# Mandatory: no
# Range: 128K-2G
# Default:
#说明:指定划出多少系统共享内存用于存储 character, text or log history数据，若二级代理内存足够，建议可适当扩大此数值，可很大程度上解决系统I/O压力，和数据库读压力
# HistoryTextCacheSize=16M
### Option: ValueCacheSize
#   Size of history value cache, in bytes.
#   Shared memory size for caching item history data requests
#   Setting to 0 disables value cache.
#
# Mandatory: no
# Range: 0,128K-64G
# Default:
#**说明：**划出系统多少共享内存用于已请求的存储监控项信息，若监控项较多，建议加大此数值
# ValueCacheSize=8M
### Option: NodeNoEvents
#   If set to '1' local events won't be sent to master node.
#   This won't impact ability of this node to propagate events from its child nodes.
#
# Mandatory: no
# Range: 0-1
# Default:
#**说明：**若节点为子结点，是否允许本地事件（events表）发送到主节点，1为不发送，但不影响此节点以下的节点的传播能力，视ZABBIX分布式系统架构设计开启或关闭。在不明架构前提下，建议保持默认
# NodeNoEvents=0
### Option: NodeNoHistory
#   If set to '1' local history won't be sent to master node.
#   This won't impact ability of this node to propagate history from its child nodes.
#
# Mandatory: no
# Range: 0-1
# Default: 
**说明：**若节点为子结点，是否允许本地历史数据发送到主节点，1为不发送，但不影响此节点以下的节点的传播能力，视ZABBIX分布式系统架构设计开启或关闭，在不明架构前提下，建议保持默认
# NodeNoHistory=0
### Option: Timeout
#   Specifies how long we wait for agent, SNMP device or external check (in seconds).
#
# Mandatory: no
# Range: 1-30
# Default:
#**说明：**与AGNET\SNMP设备和其它外部设备通信超时设置，单位为秒；若采集数据不完整或网络繁忙，或从管理页面发现客户端状态变化频繁，可以考虑加大此数值。注意若此数值加大，应该考虑参数
StartPollers 是否有相应加大的必要。
# Timeout=3
### Option: TrapperTimeout
#   Specifies how many seconds trapper may spend processing new data.
#
# Mandatory: no
# Range: 1-300
# Default:
#**说明：**启用 trapper功能，用于进程等待超时设置。根据需要调整
# TrapperTimeout=300
### Option: UnreachablePeriod
#   After how many seconds of unreachability treat a host as unavailable.
#
# Mandatory: no
# Range: 1-3600
# Default:
#**说明：**当AGNET端处于不可用状态下，间隔多少秒后，尝试重新连接。建议根据具体情况设置。注意，若此数值过小，右agent端业务系统繁忙时，有可能造成报警信息误报
# UnreachablePeriod=45
### Option: UnavailableDelay
#   How often host is checked for availability during the unavailability period, in seconds.
#
# Mandatory: no
# Range: 1-3600
# Default:
#说明:当AGENT端处于可用状态下，间隔多少秒后，进行状态检查。若出现可正常采集数据，但管理页面AGENT状态不正常；若在网络，端口等均通畅情况下，AGENT状态仍不正常，可以考虑加大此数值
# UnavailableDelay=60
### Option: UnreachableDelay
#   How often host is checked for availability during the unreachability period, in seconds.
#
# Mandatory: no
# Range: 1-3600
# Default:
#**说明：**当agent端处于不可达状态下，延迟多少秒后，进行重新尝试，建议保持默认，在AGENT接入调试阶段，可考虑减少此数值
# UnreachableDelay=15
### Option: AlertScriptsPath
#   Full path to location of custom alert scripts.
#   Default depends on compilation options.
#
# Mandatory: no
# Default:
#**说明：**监控报警脚本路径，非研发人员不建议修改此参数值
# AlertScriptsPath=${datadir}/zabbix/alertscripts
### Option: ExternalScripts
#   Full path to location of external scripts.
#   Default depends on compilation options.
#
# Mandatory: no
# Default:
#**说明：**自定义脚本存储路径，非研发人员不建议修改此参数值
# ExternalScripts=${datadir}/zabbix/externalscripts
### Option: FpingLocation
#   Location of fping.
#   Make sure that fping binary has root ownership and SUID flag set.
#
# Mandatory: no
# Default:
#**说明：**IPv4 FPING命令路径，仅ROOT可用。注意使用此命令时，应该确认此命令是否存在
# FpingLocation=/usr/sbin/fping
### Option: Fping6Location
#   Location of fping6.
#   Make sure that fping6 binary has root ownership and SUID flag set.
#   Make empty if your fping utility is capable to process IPv6 addresses.
#
# Mandatory: no
# Default:
#**说明：**IPv6 FPING命令路径，仅ROOT可用。注意使用此命令时，应该确认此命令是否存在
# Fping6Location=/usr/sbin/fping6
### Option: SSHKeyLocation
#   Location of public and private keys for SSH checks and actions.
#
# Mandatory: no
# Default:
#**说明：**在服务端需要SSH到AGENT端且采用用KEY验证方式时使用。非研发人员，不建议修改或设置
# SSHKeyLocation=
### Option: LogSlowQueries
#   How long a database query may take before being logged (in milliseconds).
#   Only works if DebugLevel set to 3 or 4.
#   0 - don't log slow queries.
#
# Mandatory: no
# Range: 1-3600000
# Default:
#说明:用于服务端数据库慢查询功能，单位是毫秒；1毫秒=0.001秒，若有服务端数据库监控慢查询的需求，可以视具体情况调整此数。
# LogSlowQueries=0
### Option: TmpDir
#   Temporary directory.
#
# Mandatory: no
# Default:
#**说明：**zabbix服务端工作的临时目录
# TmpDir=/tmp
### Option: StartProxyPollers
#   Number of pre-forked instances of pollers for passive proxies.
#
# Mandatory: no
# Range: 0-250
# Default:
#说明:启用多少子进程与代理端通信，若代理端较多可考虑加大此数值
# StartProxyPollers=1
### Option: ProxyConfigFrequency
#   How often Zabbix Server sends configuration data to a Zabbix Proxy in seconds.
#   This parameter is used only for proxies in the passive mode.
#
# Mandatory: no
# Range: 1-3600*24*7
# Default:
#**说明：**zabbix服务端将配置文件数据同步到代理端的频率，仅适用于代理端为被动模式情况 下
# ProxyConfigFrequency=3600
### Option: ProxyDataFrequency
#   How often Zabbix Server requests history data from a Zabbix Proxy in seconds.
#   This parameter is used only for proxies in the passive mode.
#
# Mandatory: no
# Range: 1-3600
# Default: 
**说明：**zabbix服务端请求代理端采集的数据的频率，仅适用代理端为被动模式情况下
# ProxyDataFrequency=1
### Option: AllowRoot
#   Allow the server to run as 'root'. If disabled and the server is started by 'root', the server
#   will try to switch to user 'zabbix' instead. Has no effect if started under a regular user.
#   0 - do not allow 不允许
#   1 - allow 允许
#
# Mandatory: no
# Default:
#**说明：**是否允许以root身份运行服务端
# AllowRoot=0
### Option: Include
#   You may include individual files or all files in a directory in the configuration file.
#   InstallingZabbix will create include directory in /usr/local/etc, unless modified during the compile time.
#
# Mandatory: no
# Default:
#**说明：**在一些情况下，软件的参数配置文件很长，为了方便管理，将配置文件切割成N个配置文件，但为了主配置参数文件的简洁，便会启用INCLUDE参数，以方便程序读取指定目录下的所有配置文件
# Include=
# Include=/usr/local/etc/zabbix_server.general.conf
# Include=/usr/local/etc/zabbix_server.conf.d/
####### LOADABLE MODULES #######
### Option: LoadModulePath
#   Full path to location of server modules.
#   Default depends on compilation options.
#
# Mandatory: no
# Default:
#指定本地模块路径，非研发人员不建议修改
# LoadModulePath=${libdir}/modules
### Option: LoadModule
#   Module to load at server startup. Modules are used to extend functionality of the server.
#   Format: LoadModule=<module.so>
#   The modules must be located in directory specified by LoadModulePath.
#   It is allowed to include multiple LoadModule parameters.
#
# Mandatory: no
# Default:
#指定本地模块路径，非研发人员不建议修改
# LoadModule=