一、Gitlab的备份
使用Gitlab一键安装包安装Gitlab非常简单, 同样的备份恢复与迁移也非常简单. 使用一条命令即可创建完整的Gitlab备份
[root@gitlab ~]# gitlab-rake gitlab:backup:create
//比如使用以上命令会在/var/opt/gitlab/backups目录下创建一个名称类似为1481598919_gitlab_backup.tar的压缩包, 这个压缩包就是Gitlab整个的完整部分,
其中开头的1481598919是备份创建的日期。
/etc/gitlab/gitlab.rb 配置文件须备份
/var/opt/gitlab/nginx/conf nginx配置文件
/etc/postfix/main.cfpostfix 邮件配置备份1、Gitlab备份目录
可以通过/etc/gitlab/gitlab.rb配置文件来修改默认存放备份文件的目录
[root@code-server ~]# vim /etc/gitlab/gitlab.rb
gitlab_rails['manage_backup_path'] = true
gitlab_rails['backup_path'] = "/data/gitlab/backups" //gitlab备份目录
gitlab_rails['backup_archive_permissions'] = 0644 //生成的备份文件权限
gitlab_rails['backup_keep_time'] = 7776000 //备份保留天数为3个月（即90天，这里是7776000秒）
[root@code-server ~]# mkdir -p /data/gitlab/backups
[root@code-server ~]# chown -R git.git /data/gitlab/backups
[root@code-server ~]# chmod -R 777 /data/gitlab/backups
如上设置了gitlab备份目录路径为/data/gitlab/backups，最后使用下面命令重载gitlab配置文件，是上述修改生效！
root@code-server ~]# gitlab-ctl reconfiguregitlab_rails['backup_path'] = "/var/opt/gitlab/backups"
/var/opt/gitlab/backups修改为你想存放备份的目录即可, 修改完成之后使用gitlab-ctl reconfigure命令重载配置文件即可.2、Gitlab自动备份
编写备份脚本，结合crontab实施自动定时备份，比如每天0点、6点、12点、18点各备份一次
[root@code-server backups]# pwd
/data/gitlab/backups
[root@code-server backups]# vim gitlab_backup.sh
#!/bin/bash
/usr/bin/gitlab-rake gitlab:backup:create CRON=1
注意：环境变量CRON=1的作用是如果没有任何错误发生时， 抑制备份脚本的所有进度输出
[root@code-server backups]# crontab -l
0 0,6,12,18 * * * /bin/bash -x /data/gitlab/backups/gitlab_backup.sh > /dev/null 2>&1现在我们公司实现每天凌晨2点进行一次自动备份:通过crontab使用备份命令实现
0 2 * * * /opt/gitlab/bin/gitlab-rake gitlab:backup:create二、Gitlab恢复
GItlab只能还原到与备份文件相同的gitlab版本。
假设在上面gitlab备份之前创建了test项目，然后不小心误删了test项目，现在就进行gitlab恢复操作：
1）停止相关数据连接服务
[root@code-server backups]# gitlab-ctl stop unicorn
ok: down: unicorn: 0s, normally up
[root@code-server backups]# gitlab-ctl stop sidekiq
ok: down: sidekiq: 1s, normally up
[root@code-server backups]# gitlab-ctl status
run: gitaly: (pid 98087) 1883s; run: log: (pid 194202) 163003s
run: gitlab-monitor: (pid 98101) 1883s; run: log: (pid 194363) 163002s
run: gitlab-workhorse: (pid 98104) 1882s; run: log: (pid 194362) 163002s
run: logrotate: (pid 98117) 1882s; run: log: (pid 5793) 160832s
run: nginx: (pid 98123) 1881s; run: log: (pid 194359) 163002s
run: node-exporter: (pid 98167) 1881s; run: log: (pid 194360) 163002s
run: postgres-exporter: (pid 98173) 1881s; run: log: (pid 194204) 163003s
run: postgresql: (pid 98179) 1880s; run: log: (pid 194365) 163002s
run: prometheus: (pid 98187) 1880s; run: log: (pid 194364) 163002s
run: redis: (pid 98230) 1879s; run: log: (pid 194358) 163002s
run: redis-exporter: (pid 98234) 1879s; run: log: (pid 194208) 163003s
down: sidekiq: 8s, normally up; run: log: (pid 194437) 163001s
down: unicorn: 21s, normally up; run: log: (pid 194443) 163001s
2）现在通过之前的备份文件进行恢复（必须要备份文件放到备份路径下，这里备份路径我自定义的/data/gitlab/backups，默认的是/var/opt/gitlab/backups）
[root@code-server backups]# pwd
/data/gitlab/backups
[root@code-server backups]# ll
total 244
-rw-r--r-- 1 git git 245760 Nov 12 15:33 1510472027_2017_11_12_9.4.5_gitlab_backup.tar
Gitlab的恢复操作会先将当前所有的数据清空，然后再根据备份数据进行恢复
[root@code-server backups]# gitlab-rake gitlab:backup:restore BACKUP=1510472027_2017_11_12_9.4.5
Unpacking backup ... done
Before restoring the database we recommend removing all existing
tables to avoid future upgrade problems. Be aware that if you have
custom tables in the GitLab database these tables and all data will be
removed.
Do you want to continue (yes/no)?
........
ALTER TABLE
ALTER TABLE
ALTER TABLE
ALTER TABLE
WARNING: no privileges were granted for "public"
GRANT
[DONE]
done
Restoring repositories ...
* treesign/treesign ... [DONE]
* gateway/gateway ... [DONE]
* treesign/treesign-doc ... [DONE]
* qwsign/qwsign ... [DONE]
* qwsign/qwsign-doc ... [DONE]
* test/test ... [DONE]
Put GitLab hooks in repositories dirs [DONE]
done
Restoring uploads ...
done
Restoring builds ...
done
Restoring artifacts ...
done
Restoring pages ...
done
Restoring lfs objects ...
done
This will rebuild an authorized_keys file.
You will lose any data stored in authorized_keys file.
Do you want to continue (yes/no)? yes
Deleting tmp directories ... done
done
done
done
done
done
done
done
[root@code-server backups]#
最后再次启动Gitlab
[root@code-server backups]# gitlab-ctl start
ok: run: gitaly: (pid 98087) 2138s
ok: run: gitlab-monitor: (pid 98101) 2138s
ok: run: gitlab-workhorse: (pid 98104) 2137s
ok: run: logrotate: (pid 98117) 2137s
ok: run: nginx: (pid 98123) 2136s
ok: run: node-exporter: (pid 98167) 2136s
ok: run: postgres-exporter: (pid 98173) 2136s
ok: run: postgresql: (pid 98179) 2135s
ok: run: prometheus: (pid 98187) 2135s
ok: run: redis: (pid 98230) 2134s
ok: run: redis-exporter: (pid 98234) 2134s
ok: run: sidekiq: (pid 104494) 0s
ok: run: unicorn: (pid 104497) 1s
[root@code-server backups]# gitlab-ctl status
run: gitaly: (pid 98087) 2142s; run: log: (pid 194202) 163262s
run: gitlab-monitor: (pid 98101) 2142s; run: log: (pid 194363) 163261s
run: gitlab-workhorse: (pid 98104) 2141s; run: log: (pid 194362) 163261s
run: logrotate: (pid 98117) 2141s; run: log: (pid 5793) 161091s
run: nginx: (pid 98123) 2140s; run: log: (pid 194359) 163261s
run: node-exporter: (pid 98167) 2140s; run: log: (pid 194360) 163261s
run: postgres-exporter: (pid 98173) 2140s; run: log: (pid 194204) 163262s
run: postgresql: (pid 98179) 2139s; run: log: (pid 194365) 163261s
run: prometheus: (pid 98187) 2139s; run: log: (pid 194364) 163261s
run: redis: (pid 98230) 2138s; run: log: (pid 194358) 163261s
run: redis-exporter: (pid 98234) 2138s; run: log: (pid 194208) 163262s
run: sidekiq: (pid 104494) 4s; run: log: (pid 194437) 163260s
run: unicorn: (pid 104497) 4s; run: log: (pid 194443) 163260s
恢复命令完成后，可以check检查一下恢复情况
[root@code-server backups]# gitlab-rake gitlab:check SANITIZE=true
Checking GitLab Shell ...
GitLab Shell version >= 5.3.1 ? ... OK (5.3.1)
Repo base directory exists?
default... yes
Repo storage directories are symlinks?
default... no
Repo paths owned by git:root, or git:git?
default... yes
Repo paths access is drwxrws---?
default... yes
hooks directories in repos are links: ...
5/1 ... ok
6/2 ... ok
5/3 ... repository is empty
12/4 ... ok
12/5 ... ok
Running /opt/gitlab/embedded/service/gitlab-shell/bin/check
Check GitLab API access: OK
Access to /var/opt/gitlab/.ssh/authorized_keys: OK
Send ping to redis server: OK
gitlab-shell self-check successful
Checking GitLab Shell ... Finished
Checking Sidekiq ...
Running? ... yes
Number of Sidekiq processes ... 1
Checking Sidekiq ... Finished
Checking Reply by email ...
Reply by email is disabled in config/gitlab.yml
Checking Reply by email ... Finished
Checking LDAP ...
LDAP is disabled in config/gitlab.yml
Checking LDAP ... Finished
Checking GitLab ...
Git configured correctly? ... yes
Database config exists? ... yes
All migrations up? ... yes
Database contains orphaned GroupMembers? ... no
GitLab config exists? ... yes
GitLab config up to date? ... yes
Log directory writable? ... yes
Tmp directory writable? ... yes
Uploads directory exists? ... yes
Uploads directory has correct permissions? ... yes
Uploads directory tmp has correct permissions? ... yes
Init script exists? ... skipped (omnibus-gitlab has no init script)
Init script up-to-date? ... skipped (omnibus-gitlab has no init script)
Projects have namespace: ...
5/1 ... yes
6/2 ... yes
5/3 ... yes
12/4 ... yes
12/5 ... yes
Redis version >= 2.8.0? ... yes
Ruby version >= 2.3.3 ? ... yes (2.3.3)
Git version >= 2.7.3 ? ... yes (2.13.4)
Active users: ... 11
Checking GitLab ... Finished
然后稍等一会（如果启动gitlab后，访问出现500，这是因为redis等程序还没完全启动，等一会儿访问就ok了），再次登录Gitlab，就会发现之前误删除的test项目已经恢复了！
另外：Gitlab迁移与恢复一样，但是要求两个GitLab版本号一致三、Gitlab迁移
注意：新服务器的gitlab版本与旧的服务器相同。
迁移如同备份与恢复的步骤一样, 只需要将老服务器/var/opt/gitlab/backups目录下的备份文件拷贝到新服务器上的/var/opt/gitlab/backups即可(如果你没修改过默认备份目录的话).
但是需要注意的是：
新服务器上的Gitlab的版本必须与创建备份时的Gitlab版本号相同. 比如新服务器安装的是最新的7.60版本的Gitlab, 那么迁移之前, 最好将老服务器的Gitlab 升级为7.60在进行备份.
/etc/gitlab/gitlab.rb 这个gitlab配置文件须迁移,迁移后需要调整数据存放目录
/var/opt/gitlab/nginx/conf 这个nginx配置文件目录须迁移
/etc/gitlab/gitlab-secrets.json #复制新服务器相同的目录下
/etc/ssh/*key* #复制到新服务器相同目录下，解决ssh key认证不成功问题[root@gitlab ~]# gitlab-ctl stop unicorn
[root@gitlab ~]# gitlab-ctl stop sidekiq
[root@gitlab ~]# chmod 777 /var/opt/gitlab/backups/1481598919_gitlab_backup.tar # 或 chown git:git /var/opt/gitlab/backups/1481598919_gitlab_backup.tar
[root@gitlab ~]# gitlab-rake gitlab:backup:restore BACKUP=1481598919四、Gitlab升级
1.关闭gitlab服务
# gitlab-ctl stop unicorn
# gitlab-ctl stop sidekiq
# gitlab-ctl stop nginx
2.备份gitlab
# gitlab-rake gitlab:backup:create
3.下载gitlab的RPM包并进行升级
# curl -s https://packages.gitlab.com/install/repositories/gitlab/gitlab-ce/script.rpm.sh | sudo bash
# yum update gitlab-ce
或者直接安装高版本
#yum install gitlab-ce-12.1.12-ce.0.el7.x86_64
或者上官网下载最新版本 gitlab对应软件包
gitlab官网地址： https://packages.gitlab.com/gitlab/gitlab-ce/packages/el/7/gitlab-ce-12.1.12-ce.0.el7.x86_64.rpm
使用：
# rpm -Uvh gitlab-ce-12.1.12-ce.0.el7.x86_64
如果报错.
Error executing action `run` on resource 'ruby_block[directory resource: /var/opt/gitlab/git-data/repositories]'
解决方法:
sudo chmod 2770 /var/opt/gitlab/git-data/repositories
4.启动并查看gitlab版本信息
# gitlab-ctl reconfigure
# gitlab-ctl restart
# head -1 /opt/gitlab/version-manifest.txt-----------------------------------------------------------书山有路勤为径，学海无涯苦作舟-------------------------------------------------------------
本文章为转载内容，我们尊重原作者对文章享有的著作权。如有内容错误或侵权问题，欢迎原作者联系我们进行内容更正或删除文章。
