LDAP系统 ldap pam

转载

mob6454cc6f4a4e 2024-05-08 16:49:41

文章标签 LDAP系统 linux 运维 apache 服务器 文章分类 机器学习人工智能

构建LAMP网站服务第一步编译安装httpd服务器

1、安装前准备
2、编译安装apr
3、编译安装expat
4、编译安装apr-util
5、编译安装pcre
6、编译安装httpd
7、selinux配置
8、防火墙配置
9、修改主配置文件httpd.conf
10、http.conf 语法检查
11、启动httpd服务
12、测试
13、测试本机httpd服务器的性能

1、安装前准备

解压apr apr-util pcre httpd expat包

[root@localhost app]# tar -xvf apr-1.6.5.tar.xz -C /app/
[root@localhost app]# tar -xvf apr-util-1.6.1.tar.xz -C /app/
[root@localhost app]# tar -xvf pcre-8.42.tar.xz -C /app/
[root@localhost app]# tar -xvf httpd-2.4.46.tar.xz -C /app/

[root@localhost app]# ls
apr-1.6.5  apr-util-1.6.1  httpd-2.4.46  packages  pcre-8.42

安装软件支持

[root@localhost apr-1.6.5]# dnf -y install gcc gcc-c++ make cmake gdb libstdc++*

2、编译安装apr

[root@localhost apr-1.6.5]# pwd
/app/apr-1.6.5

[root@localhost apr-1.6.5]# ./configure --prefix=/usr/local/apr

[root@localhost apr-1.6.5]# make && make install

这里运行编译文件时可能会报错

rm: cannot remove 'libtoolT': No such file or directory

解决：

[root@localhost apr-1.6.5]# vim configure
#把RM='$RM'改为RM='$RM  -f'

3、编译安装expat

[root@localhost expat-2.2.3]# pwd
/app/expat-2.2.3
[root@localhost expat-2.2.3]# ./configure --prefix=/usr/local/expat
make && make install

4、编译安装apr-util

[root@localhost apr-util-1.6.1]# pwd
/app/apr-util-1.6.1
[root@localhost apr-util-1.6.1]# ./configure --prefix=/usr/local/apr-util --with-apr=/usr/local/apr --with-expat=/usr/local/expat
make && make install

5、编译安装pcre

[root@localhost pcre-8.42]# pwd
/app/pcre-8.42
[root@localhost pcre-8.42]# ./configure --prefix=/usr/local/pcre
[root@localhost pcre-8.42]# make && make install

6、编译安装httpd

[root@localhost httpd-2.4.46]# pwd
/app/httpd-2.4.46
[root@localhost httpd-2.4.46]# ./configure --prefix=/usr/local/apache --with-apr=/usr/local/apr --with-apr-util=/usr/local/apr-util --with-pcre=/usr/local/pcre  --enable-so   --enable-rewrite --enable-ssl  --with-ssl=/usr/lib  --enable-auth-digest --enable-cgi --enable-suexec  --with-suexec-caller=daemon --with-suexec-docroot=/usr/local/apache/htdocs
#这里的编译选项应当是需要什么加什么，具体选项见说明文档

httpd服务的目录结构
服务目录：/usr/local/apache/
主配置文件：/usr/local/apache/conf/httpd.conf
网页目录：/usr/local/apache/htdocs/
服务脚本：/usr/local/apache/bin/apachectl
执行程序：/usr/local/apache/bin/httpd
访问日志： /usr/local/apache/log/access_log
错误日志： /usr/local/apache/log/error_log

7、selinux配置

[root@localhost httpd-2.4.46]# getsebool -a | grep httpd
httpd_anon_write --> off
httpd_builtin_scripting --> on
httpd_can_check_spam --> off
httpd_can_connect_ftp --> off
httpd_can_connect_ldap --> off
httpd_can_connect_mythtv --> off
httpd_can_connect_zabbix --> off
httpd_can_network_connect --> off
httpd_can_network_connect_cobbler --> off
httpd_can_network_connect_db --> off
httpd_can_network_memcache --> off
httpd_can_network_relay --> off
httpd_can_sendmail --> off
httpd_dbus_avahi --> off
httpd_dbus_sssd --> off
httpd_dontaudit_search_dirs --> off
httpd_enable_cgi --> on
httpd_enable_ftp_server --> off
httpd_enable_homedirs --> off
httpd_execmem --> off
httpd_graceful_shutdown --> off
httpd_manage_ipa --> off
httpd_mod_auth_ntlm_winbind --> off
httpd_mod_auth_pam --> off
httpd_read_user_content --> off
httpd_run_ipa --> off
httpd_run_preupgrade --> off
httpd_run_stickshift --> off
httpd_serve_cobbler_files --> off
httpd_setrlimit --> off
httpd_ssi_exec --> off
httpd_sys_script_anon_write --> off
httpd_tmp_exec --> off
httpd_tty_comm --> off
httpd_unified --> off
httpd_use_cifs --> off
httpd_use_fusefs --> off
httpd_use_gpg --> off
httpd_use_nfs --> off
httpd_use_opencryptoki --> off
httpd_use_openstack --> off
httpd_use_sasl --> off
httpd_verify_dns --> off

[root@localhost httpd-2.4.46]# setsebool -P httpd_anon_write on
[root@localhost httpd-2.4.46]# setsebool -P httpd_can_check_spam on
[root@localhost httpd-2.4.46]# setsebool -P httpd_can_network_connect on
[root@localhost httpd-2.4.46]# setsebool -P httpd_can_network_connect_db on
[root@localhost httpd-2.4.46]# setsebool -P httpd_can_network_relay on
[root@localhost httpd-2.4.46]# setsebool -P httpd_tmp_exec on
[root@localhost httpd-2.4.46]# setsebool -P httpd_ssi_exec  on
[root@localhost httpd-2.4.46]# setsebool -P httpd_enable_cgi  on

8、防火墙配置

[root@localhost httpd-2.4.46]# firewall-cmd  --add-port=80/tcp --permanent 
success
[root@localhost httpd-2.4.46]# firewall-cmd  --add-port=443/tcp --permanent 
success
[root@localhost httpd-2.4.46]# firewall-cmd  --add-port=8080/tcp --permanent 
success
[root@localhost httpd-2.4.46]# firewall-cmd  --add-port=8888/tcp --permanent 
success
[root@localhost httpd-2.4.46]# firewall-cmd  --add-service=http  --permanent 
success
[root@localhost httpd-2.4.46]# firewall-cmd  --add-service=https  --permanent 
success
[root@localhost httpd-2.4.46]# firewall-cmd  --reload
success

9、修改主配置文件httpd.conf

[root@localhost conf]# pwd
/usr/local/apache/conf
[root@localhost conf]# vim httpd.conf 

ServerAdmin mufeng.yu@qq.com		#管理员邮箱
ServerName www.mufeng.com:80	#站点名称

ServerRoot：服务目录
ServerAdmin：管理员邮箱
User：运行服务的用户身份
Group：运行服务的组身份
ServerName：网站服务器的域名
DocumentRoot：网页文档的根目录
Listen：监听的IP地址、端口号
PidFile：保存httpd进程PID号的文件
DirectoryIndex：默认的索引页文件
ErrorLog：错误日志文件的位置
CustomLog：访问日志文件的位置
LogLevel：记录日志的级别，默认为warn
Timeout：网络连接超时，默认为300秒
KeepAlive：是否保持连接，可选On或Off
MaxKeepAliveRequests：每次连接最多请求文件数
KeepAliveTimeout：保持连接状态时的超时时间
Include：需要包含进来的其他配置文件

10、http.conf 语法检查

[root@localhost conf]# /usr/local/apache/bin/apachectl  -t
Syntax OK

11、启动httpd服务

[root@localhost conf]# /usr/local/apache/bin/apachectl start

12、测试

[root@localhost conf]# wget www.mufeng.com
--2020-12-01 08:41:48--  http://www.mufeng.com/
Resolving www.mufeng.com (www.mufeng.com)... 192.35.35.1
Connecting to www.mufeng.com (www.mufeng.com)|192.35.35.1|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 45 [text/html]
Saving to: ‘index.html’

index.html                        100%[==========================================================>]      45  --.-KB/s    in 0s      

2020-12-01 08:41:48 (7.99 MB/s) - ‘index.html’ saved [45/45]

[root@localhost conf]# vim index.html 
<html><body><h1>It works!</h1></body></html>

这个测试完全可以通过ip地址来实现，如果想通过域名访问，需要配置自己的DNS域名服务器bind

13、测试本机httpd服务器的性能

ab命令格式说明

ab [-q] -c 并发请求数 -n 总的请求数 [http://]域名[:端口]/路径

[root@localhost conf]# ulimit -n 3600
[root@localhost bin]# pwd
/usr/local/apache/bin
[root@localhost bin]# ./ab -q -c 2000 -n 4000 http://www.mufeng.com/ 
This is ApacheBench, Version 2.3 <$Revision: 1879490 $>
Copyright 1996 Adam Twiss, Zeus Technology Ltd, http://www.zeustech.net/
Licensed to The Apache Software Foundation, http://www.apache.org/

Benchmarking www.mufeng.com (be patient).....done


Server Software:        Apache/2.4.46
Server Hostname:        www.mufeng.com
Server Port:            80

Document Path:          /
Document Length:        45 bytes

Concurrency Level:      2000
Time taken for tests:   0.519 seconds
Complete requests:      4000
Failed requests:        0
Total transferred:      1156000 bytes
HTML transferred:       180000 bytes
Requests per second:    7703.79 [#/sec] (mean)
Time per request:       259.613 [ms] (mean)
Time per request:       0.130 [ms] (mean, across all concurrent requests)
Transfer rate:          2174.21 [Kbytes/sec] received

Connection Times (ms)
              min  mean[+/-sd] median   max
Connect:        0    9  17.2      4      71
Processing:     0   17  46.8      8     428
Waiting:        0   16  46.7      7     428
Total:          0   26  58.4     12     498

Percentage of the requests served within a certain time (ms)
  50%     12
  66%     13
  75%     15
  80%     16
  90%     24
  95%     81
  98%    283
  99%    288
 100%    498 (longest request)

注：构建服务所需的包可在server_source_2020.iso 请自行下载，您也可以在所需安装包官网下载
本地源配置、防火墙、selinux等是linux较为基础的内容，不再赘述。

本文章为转载内容，我们尊重原作者对文章享有的著作权。如有内容错误或侵权问题，欢迎原作者联系我们进行内容更正或删除文章。

上一篇：python 源码到机器语言的过程 python编译为机器码

下一篇：java如何统计文章浏览量 java记录访问量

提问和评论都可以，用心的回复会被更多人看到评论

发布评论

相关文章

官方博客	全部文章	热门标签	班级博客
了解我们	网站地图	意见反馈

鸿蒙开发者社区	51CTO学堂
51CTO	软考资讯

LDAP系统 ldap pam

LDAP系统 ldap pam

构建LAMP网站服务 第一步 编译安装httpd服务器

1、安装前准备

2、编译安装apr

3、编译安装expat

4、编译安装apr-util

5、编译安装pcre

6、编译安装httpd

7、selinux配置

8、防火墙配置

9、修改主配置文件httpd.conf

10、http.conf 语法检查

11、启动httpd服务

12、测试

13、测试本机httpd服务器的性能

51CTO博客

构建LAMP网站服务第一步编译安装httpd服务器