一、安装前准备
机器列表
主机名 | IP |
node-1(master) | 1.1.1.101 |
node-2(node) | 1.1.1.102 |
node-3(node) | 1.1.1.103 |
设置时区
cp /usr/share/zoneinfo/Asia/Shanghai /etc/localtime
timedatectl set-timezone Asia/Shanghai关闭防火墙及SELINUX
systemctl stop firewalld
systemctl disable firewalld
setenforce 0
sed -i 's/=enforcing/=disabled/g' /etc/selinux/config关闭 swap 分区
swapoff -a
sed -i '/swap/s/^/#/' /etc/fstab默认情况下，Kubelet不允许所在的主机存在交换分区，后期规划的时候，可以考虑在系统安装的时候不创建交换分区，针对已经存在交换分区的可以设置忽略禁止使用Swap的限制，不然无法启动Kubelet。
[root@node-1 ~]# vim /etc/sysconfig/kubelet
KUBELET_EXTRA_ARGS="--fail-swap-on=false"加载 br_netfilter 模块，并创建/etc/sysctl.d/k8s.conf文件
lsmod | grep br_netfilter
modprobe br_netfilter
cat <<EOF > /etc/sysctl.d/k8s.conf
net.bridge.bridge-nf-call-ip6tables = 1
net.bridge.bridge-nf-call-iptables = 1
net.ipv4.ip_forward = 1
EOF
sysctl --systemipvs准备
由于ipvs已经加入到了内核的主干，所以为kube-proxy开启ipvs的前提需要加载以下的内核模块：
ip_vs
ip_vs_rr
ip_vs_wrr
ip_vs_sh
nf_conntrack_ipv4在所有的Kubernetes节点上执行以下脚本:
cat > /etc/sysconfig/modules/ipvs.modules <<EOF
#!/bin/bash
modprobe -- ip_vs
modprobe -- ip_vs_rr
modprobe -- ip_vs_wrr
modprobe -- ip_vs_sh
modprobe -- nf_conntrack_ipv4
EOF
chmod 755 /etc/sysconfig/modules/ipvs.modules && bash /etc/sysconfig/modules/ipvs.modules && lsmod | grep -e ip_vs -e nf_conntrack_ipv4上面脚本创建了的/etc/sysconfig/modules/ipvs.modules文件，保证在节点重启后能自动加载所需模块。 使用lsmod | grep -e ip_vs -e nf_conntrack_ipv4命令查看是否已经正确加载所需的内核模块。
# 检查加载的模块
lsmod | grep -e ipvs -e nf_conntrack_ipv4
# 或者
cut -f1 -d " " /proc/modules | grep -e ip_vs -e nf_conntrack_ipv4接下来还需要确保各个节点上已经安装了ipset软件包。 为了便于查看ipvs的代理规则，最好安装一下管理工具ipvsadm。
yum install ipset ipvsadm -y如果以上前提条件如果不满足，则即使kube-proxy的配置开启了ipvs模式，也会退回到iptables模式。
准备 k8s的yum仓库
[root@node-1 yum.repos.d]# cat kubernetes.repo
[kubernetes]
name=Kubernetes Repo
baseurl=https://mirrors.aliyun.com/kubernetes/yum/repos/kubernetes-el7-x86_64/
gpgcheck=1
gpgkey=https://mirrors.aliyun.com/kubernetes/yum/doc/rpm-package-key.gpg
enabled=1准备docker-ce 的仓库
wget https://mirrors.aliyun.com/docker-ce/linux/centos/docker-ce.repo二、集群部署
安装 docker-ce 和 kubeadm
yum install docker-ce kubelet kubeadm kubectl启动docker、kubelet并设置开机启动
注意，此时kubelet是无法正常启动的，可以查看/var/log/messages有报错信息，等待执行初始化之后即可正常，为正常现象。
systemctl enable docker && systemctl start docker
systemctl enable kubelet && systemctl start kubelet各节点提前下载镜像
[root@node-2 opt]# cat k8s-image-download.sh
#!/bin/bash
# liyongjian5179@163.com
# download k8s 1.15.3 images
# get image-list by 'kubeadm config images list --kubernetes-version=v1.15.3'
# gcr.azk8s.cn/google-containers == k8s.gcr.io
if [ $# -ne 1 ];then
echo "please user in: ./`basename $0` KUBERNETES-VERSION"
exit 1
fi
version=$1
images=`kubeadm config images list --kubernetes-version=${version} |awk -F'/' '{print $2}'`
for imageName in ${images[@]};do
docker pull gcr.azk8s.cn/google-containers/$imageName
docker tag gcr.azk8s.cn/google-containers/$imageName k8s.gcr.io/$imageName
docker rmi gcr.azk8s.cn/google-containers/$imageName
done
[root@node-2 opt]#./k8s-image-download.sh 1.15.3主节点执行
kubeadm init --kubernetes-version=v1.15.3 --pod-network-cidr=10.244.0.0/16 --service-cidr=10.96.0.0/12 --ignore-preflight-errors=Swap --ignore-preflight-errors=NumCPU --apiserver-advertise-address=1.1.1.101
- --apiserver-advertise-address：指定用 Master 的哪个IP地址与 Cluster的其他节点通信。
- --service-cidr：指定Service网络的范围，即负载均衡VIP使用的IP地址段。
- --pod-network-cidr：指定Pod网络的范围，即Pod的IP地址段。
- --image-repository：Kubenetes默认Registries地址是 k8s.gcr.io，一般在国内并不能访问 gcr.io，可以将其指定为阿里云镜像地址：registry.aliyuncs.com/google_containers。
- --kubernetes-version=v1.15.3：指定要安装的版本号。
- --ignore-preflight-errors=：忽略运行时的错误，例如执行时存在[ERROR NumCPU]和[ERROR Swap]，忽略这两个报错就是增加--ignore-preflight-errors=NumCPU 和--ignore-preflight-errors=Swap的配置即可。
如果有多个网卡，最好指定一下 apiserver-advertise 地址
[root@node-1 ~]# kubeadm init --kubernetes-version=v1.15.3 --pod-network-cidr=10.244.0.0/16 --service-cidr=10.96.0.0/12 --ignore-preflight-errors=Swap --ignore-preflight-errors=NumCPU --apiserver-advertise-address=1.1.1.101
[init] Using Kubernetes version: v1.15.3
[preflight] Running pre-flight checks
[WARNING NumCPU]: the number of available CPUs 1 is less than the required 2
[WARNING Service-Docker]: docker service is not enabled, please run 'systemctl enable docker.service'
[WARNING IsDockerSystemdCheck]: detected "cgroupfs" as the Docker cgroup driver. The recommended driver is "systemd". Please follow the guide at https://kubernetes.io/docs/setup/cri/
[WARNING Service-Kubelet]: kubelet service is not enabled, please run 'systemctl enable kubelet.service'
[preflight] Pulling images required for setting up a Kubernetes cluster
[preflight] This might take a minute or two, depending on the speed of your internet connection
[preflight] You can also perform this action in beforehand using 'kubeadm config images pull'
[kubelet-start] Writing kubelet environment file with flags to file "/var/lib/kubelet/kubeadm-flags.env"
[kubelet-start] Writing kubelet configuration to file "/var/lib/kubelet/config.yaml"
[kubelet-start] Activating the kubelet service
[certs] Using certificateDir folder "/etc/kubernetes/pki"
[certs] Generating "ca" certificate and key
[certs] Generating "apiserver-kubelet-client" certificate and key
[certs] Generating "apiserver" certificate and key
[certs] apiserver serving cert is signed for DNS names [node-1 kubernetes kubernetes.default kubernetes.default.svc kubernetes.default.svc.cluster.local] and IPs [10.96.0.1 1.1.1.101]
[certs] Generating "etcd/ca" certificate and key
[certs] Generating "etcd/healthcheck-client" certificate and key
[certs] Generating "apiserver-etcd-client" certificate and key
[certs] Generating "etcd/server" certificate and key
[certs] etcd/server serving cert is signed for DNS names [node-1 localhost] and IPs [1.1.1.101 127.0.0.1 ::1]
[certs] Generating "etcd/peer" certificate and key
[certs] etcd/peer serving cert is signed for DNS names [node-1 localhost] and IPs [1.1.1.101 127.0.0.1 ::1]
[certs] Generating "front-proxy-ca" certificate and key
[certs] Generating "front-proxy-client" certificate and key
[certs] Generating "sa" key and public key
[kubeconfig] Using kubeconfig folder "/etc/kubernetes"
[kubeconfig] Writing "admin.conf" kubeconfig file
[kubeconfig] Writing "kubelet.conf" kubeconfig file
[kubeconfig] Writing "controller-manager.conf" kubeconfig file
[kubeconfig] Writing "scheduler.conf" kubeconfig file
[control-plane] Using manifest folder "/etc/kubernetes/manifests"
[control-plane] Creating static Pod manifest for "kube-apiserver"
[control-plane] Creating static Pod manifest for "kube-controller-manager"
[control-plane] Creating static Pod manifest for "kube-scheduler"
[etcd] Creating static Pod manifest for local etcd in "/etc/kubernetes/manifests"
[wait-control-plane] Waiting for the kubelet to boot up the control plane as static Pods from directory "/etc/kubernetes/manifests". This can take up to 4m0s
[apiclient] All control plane components are healthy after 22.503724 seconds
[upload-config] Storing the configuration used in ConfigMap "kubeadm-config" in the "kube-system" Namespace
[kubelet] Creating a ConfigMap "kubelet-config-1.15" in namespace kube-system with the configuration for the kubelets in the cluster
[upload-certs] Skipping phase. Please see --upload-certs
[mark-control-plane] Marking the node node-1 as control-plane by adding the label "node-role.kubernetes.io/master=''"
[mark-control-plane] Marking the node node-1 as control-plane by adding the taints [node-role.kubernetes.io/master:NoSchedule]
[bootstrap-token] Using token: z1609x.bg2tkrsrfwlrl3rb
[bootstrap-token] Configuring bootstrap tokens, cluster-info ConfigMap, RBAC Roles
[bootstrap-token] configured RBAC rules to allow Node Bootstrap tokens to post CSRs in order for nodes to get long term certificate credentials
[bootstrap-token] configured RBAC rules to allow the csrapprover controller automatically approve CSRs from a Node Bootstrap Token
[bootstrap-token] configured RBAC rules to allow certificate rotation for all node client certificates in the cluster
[bootstrap-token] Creating the "cluster-info" ConfigMap in the "kube-public" namespace
[addons] Applied essential addon: CoreDNS
[addons] Applied essential addon: kube-proxy
Your Kubernetes control-plane has initialized successfully!
To start using your cluster, you need to run the following as a regular user:
mkdir -p $HOME/.kube
sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
sudo chown $(id -u):$(id -g) $HOME/.kube/config
You should now deploy a pod network to the cluster.
Run "kubectl apply -f [podnetwork].yaml" with one of the options listed at:
https://kubernetes.io/docs/concepts/cluster-administration/addons/
Then you can join any number of worker nodes by running the following on each as root:
kubeadm join 1.1.1.101:6443 --token z1609x.bg2tkrsrfwlrl3rb \
--discovery-token-ca-cert-hash sha256:0753a3d2f04c6c34c5ad88d4be3bc508b1e5b9d00908b29442f7068645521703初始化操作主要经历了下面15个步骤，每个阶段均输出均使用[步骤名称]作为开头：
- [init]：指定版本进行初始化操作
- [preflight] ：初始化前的检查和下载所需要的Docker镜像文件。
- [kubelet-start] ：生成kubelet的配置文件”/var/lib/kubelet/config.yaml”，没有这个文件kubelet无法启动，所以初始化之前的kubelet实际上启动失败。
- [certificates]：生成Kubernetes使用的证书，存放在/etc/kubernetes/pki目录中。
- [kubeconfig] ：生成 KubeConfig 文件，存放在/etc/kubernetes目录中，组件之间通信需要使用对应文件。
- [control-plane]：使用/etc/kubernetes/manifest目录下的YAML文件，安装 Master 组件。
- [etcd]：使用/etc/kubernetes/manifest/etcd.yaml安装Etcd服务。
- [wait-control-plane]：等待control-plan部署的Master组件启动。
- [apiclient]：检查Master组件服务状态。
- [uploadconfig]：更新配置
- [kubelet]：使用configMap配置kubelet。
- [patchnode]：更新CNI信息到Node上，通过注释的方式记录。
- [mark-control-plane]：为当前节点打标签，打了角色Master，和不可调度标签，这样默认就不会使用Master节点来运行Pod。
- [bootstrap-token]：生成token记录下来，后边使用kubeadm join往集群中添加节点时会用到
- [addons]：安装附加组件CoreDNS和kube-proxy
kubectl默认会在执行的用户家目录下面的.kube目录下寻找config文件。这里是将在初始化时[kubeconfig]步骤生成的admin.conf拷贝到.kube/config。
mkdir -p $HOME/.kube
sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
sudo chown $(id -u):$(id -g) $HOME/.kube/config安装网络插件
在此处，安装 flannel
[root@node-1 ~]# mkdir k8s
[root@node-1 ~]# cd k8s/ && wget https://raw.githubusercontent.com/coreos/flannel/master/Documentation/kube-flannel.yml
--2019-08-27 11:51:28-- https://raw.githubusercontent.com/coreos/flannel/master/Documentation/kube-flannel.yml
Resolving raw.githubusercontent.com (raw.githubusercontent.com)... 151.101.0.133, 151.101.64.133, 151.101.128.133, ...
Connecting to raw.githubusercontent.com (raw.githubusercontent.com)|151.101.0.133|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 12487 (12K) [text/plain]
Saving to: ‘kube-flannel.yml’
100%[=========================================================================>] 12,487 --.-K/s in 0s
2019-08-27 11:51:29 (52.9 MB/s) - ‘kube-flannel.yml’ saved [12487/12487]如果Node有多个网卡的话，参考flannel issues 39701，目前需要在kube-flannel.yml中使用--iface参数指定集群主机内网网卡的名称，否则可能会出现dns无法解析。需要将kube-flannel.yml下载到本地，flanneld启动参数加上--iface=<iface-name>
[root@node-1 k8s]# vim kube-flannel.yml
找到 /opt/bin/flanneld 这一行，在下面加入
“- --iface=eth1” 指定使用eth1网卡 (有很多个)
启动 flannel
[root@node-1 k8s]# kubectl apply -f kube-flannel.yml
podsecuritypolicy.policy/psp.flannel.unprivileged created
clusterrole.rbac.authorization.k8s.io/flannel created
clusterrolebinding.rbac.authorization.k8s.io/flannel created
serviceaccount/flannel created
configmap/kube-flannel-cfg created
daemonset.apps/kube-flannel-ds-amd64 created
daemonset.apps/kube-flannel-ds-arm64 created
daemonset.apps/kube-flannel-ds-arm created
daemonset.apps/kube-flannel-ds-ppc64le created
daemonset.apps/kube-flannel-ds-s390x creatednode-2 节点加入集群
[root@node-2 ~]# kubeadm join 1.1.1.101:6443 --token z1609x.bg2tkrsrfwlrl3rb \
> --discovery-token-ca-cert-hash sha256:0753a3d2f04c6c34c5ad88d4be3bc508b1e5b9d00908b29442f7068645521703
[preflight] Running pre-flight checks
[WARNING Service-Docker]: docker service is not enabled, please run 'systemctl enable docker.service'
[WARNING IsDockerSystemdCheck]: detected "cgroupfs" as the Docker cgroup driver. The recommended driver is "systemd". Please follow the guide at https://kubernetes.io/docs/setup/cri/
[preflight] Reading configuration from the cluster...
[preflight] FYI: You can look at this config file with 'kubectl -n kube-system get cm kubeadm-config -oyaml'
[kubelet-start] Downloading configuration for the kubelet from the "kubelet-config-1.15" ConfigMap in the kube-system namespace
[kubelet-start] Writing kubelet configuration to file "/var/lib/kubelet/config.yaml"
[kubelet-start] Writing kubelet environment file with flags to file "/var/lib/kubelet/kubeadm-flags.env"
[kubelet-start] Activating the kubelet service
[kubelet-start] Waiting for the kubelet to perform the TLS Bootstrap...
This node has joined the cluster:
* Certificate signing request was sent to apiserver and a response was received.
* The Kubelet was informed of the new secure connection details.
Run 'kubectl get nodes' on the control-plane to see this node join the cluster.node-3节点加入集群
[root@node-3 opt]# kubeadm join 1.1.1.101:6443 --token z1609x.bg2tkrsrfwlrl3rb \
> --discovery-token-ca-cert-hash sha256:0753a3d2f04c6c34c5ad88d4be3bc508b1e5b9d00908b29442f7068645521703
[preflight] Running pre-flight checks
[WARNING Service-Docker]: docker service is not enabled, please run 'systemctl enable docker.service'
[WARNING IsDockerSystemdCheck]: detected "cgroupfs" as the Docker cgroup driver. The recommended driver is "systemd". Please follow the guide at https://kubernetes.io/docs/setup/cri/
[preflight] Reading configuration from the cluster...
[preflight] FYI: You can look at this config file with 'kubectl -n kube-system get cm kubeadm-config -oyaml'
[kubelet-start] Downloading configuration for the kubelet from the "kubelet-config-1.15" ConfigMap in the kube-system namespace
[kubelet-start] Writing kubelet configuration to file "/var/lib/kubelet/config.yaml"
[kubelet-start] Writing kubelet environment file with flags to file "/var/lib/kubelet/kubeadm-flags.env"
[kubelet-start] Activating the kubelet service
[kubelet-start] Waiting for the kubelet to perform the TLS Bootstrap...
This node has joined the cluster:
* Certificate signing request was sent to apiserver and a response was received.
* The Kubelet was informed of the new secure connection details.
Run 'kubectl get nodes' on the control-plane to see this node join the cluster.查看集群健康状态
确认个组件都处于healthy状态
[root@node-1 ~]# kubectl get cs
NAME STATUS MESSAGE ERROR
scheduler Healthy ok
controller-manager Healthy ok
etcd-0 Healthy {"health":"true"}集群初始化如果遇到问题，可以使用下面的命令进行清理：
kubeadm reset
ifconfig cni0 down
ip link delete cni0
ifconfig flannel.1 down
ip link delete flannel.1
rm -rf /var/lib/cni/查看集群节点状态, 已经都变成 Ready 状态了
[root@node-1 k8s]# kubectl get nodes
NAME STATUS ROLES AGE VERSION
node-1 Ready master 99m v1.15.3
node-2 Ready <none> 23m v1.15.3
node-3 Ready <none> 23m v1.15.3查看集群 pod 状态都是Running状态
[root@node-1 k8s]# kubectl get pod --all-namespaces -o wide
NAMESPACE NAME READY STATUS RESTARTS AGE IP NODE NOMINATED NODE READINESS GATES
kube-system coredns-5c98db65d4-2n6vq 1/1 Running 0 100m 10.244.0.2 node-1 <none> <none>
kube-system coredns-5c98db65d4-6lpr2 1/1 Running 0 100m 10.244.1.2 node-3 <none> <none>
kube-system etcd-node-1 1/1 Running 0 99m 1.1.1.101 node-1 <none> <none>
kube-system kube-apiserver-node-1 1/1 Running 0 99m 1.1.1.101 node-1 <none> <none>
kube-system kube-controller-manager-node-1 1/1 Running 0 99m 1.1.1.101 node-1 <none> <none>
kube-system kube-flannel-ds-amd64-clrjj 1/1 Running 0 2m19s 1.1.1.102 node-2 <none> <none>
kube-system kube-flannel-ds-amd64-hth2m 1/1 Running 0 2m19s 1.1.1.101 node-1 <none> <none>
kube-system kube-flannel-ds-amd64-wmqnf 1/1 Running 0 2m19s 1.1.1.103 node-3 <none> <none>
kube-system kube-proxy-8kgdr 1/1 Running 0 25m 1.1.1.102 node-2 <none> <none>
kube-system kube-proxy-g456v 1/1 Running 0 25m 1.1.1.103 node-3 <none> <none>
kube-system kube-proxy-gdtqx 1/1 Running 0 100m 1.1.1.101 node-1 <none> <none>
kube-system kube-scheduler-node-1 1/1 Running 0 99m 1.1.1.101 node-1 <none> <none>测试 dns 解析是否正常
[root@node-1 k8s]# kubectl run -it busybox --image=radial/busyboxplus:curl
kubectl run --generator=deployment/apps.v1 is DEPRECATED and will be removed in a future version. Use kubectl run --generator=run-pod/v1 or kubectl create instead.
If you don't see a command prompt, try pressing enter.
[ root@busybox-c86c47799-qr9wq:/ ]$ nslookup kubernetes
Server: 10.96.0.10
Address 1: 10.96.0.10 kube-dns.kube-system.svc.cluster.local
Name: kubernetes
Address 1: 10.96.0.1 kubernetes.default.svc.cluster.local
[ root@busybox-c86c47799-qr9wq:/ ]$ nslookup kubernetes.default
Server: 10.96.0.10
Address 1: 10.96.0.10 kube-dns.kube-system.svc.cluster.local
Name: kubernetes.default
Address 1: 10.96.0.1 kubernetes.default.svc.cluster.local删除节点
在master节点上执行：kubectl drain node-3 --delete-local-data --force --ignore-daemonsets
当节点变成不可调度状态时候 SchedulingDisabled，执行 kubectl delete node node-3
[root@node-1 k8s]# kubectl get nodes
NAME STATUS ROLES AGE VERSION
node-1 Ready master 125m v1.15.3
node-2 Ready <none> 49m v1.15.3
node-3 Ready <none> 49m v1.15.3
[root@node-1 k8s]# kubectl drain node-3 --delete-local-data --force --ignore-daemonsets
node/node-3 cordoned
WARNING: ignoring DaemonSet-managed Pods: kube-system/kube-flannel-ds-amd64-wmqnf, kube-system/kube-proxy-g456v
evicting pod "coredns-5c98db65d4-6lpr2"
evicting pod "nginx-deploy-7689897d8d-kfc7v"
pod/nginx-deploy-7689897d8d-kfc7v evicted
pod/coredns-5c98db65d4-6lpr2 evicted
node/node-3 evicted
[root@node-1 k8s]# kubectl get nodes
NAME STATUS ROLES AGE VERSION
node-1 Ready master 125m v1.15.3
node-2 Ready <none> 50m v1.15.3
node-3 Ready,SchedulingDisabled <none> 50m v1.15.3
[root@node-1 k8s]# kubectl delete node node-3
node "node-3" deleted
[root@node-1 k8s]# kubectl get nodes
NAME STATUS ROLES AGE VERSION
node-1 Ready master 126m v1.15.3
node-2 Ready <none> 50m v1.15.3在 node-3 上执行
kubeadm reset
ifconfig cni0 down
ip link delete cni0
ifconfig flannel.1 down
ip link delete flannel.1
rm -rf /var/lib/cni/
systemctl stop kubeletkube-proxy 开启 ipvs
修改ConfigMap的kube-system/kube-proxy中的config.conf，mode: “ipvs”
[root@node-1 k8s]# kubectl edit cm kube-proxy -n kube-system
...
ipvs:
excludeCIDRs: null
minSyncPeriod: 0s
scheduler: ""
strictARP: false
syncPeriod: 30s
kind: KubeProxyConfiguration
metricsBindAddress: 127.0.0.1:10249
mode: "ipvs"
nodePortAddresses: null
oomScoreAdj: -999
portRange: ""
resourceContainer: /kube-proxy
...
configmap/kube-proxy edited对于Kubernetes来说，可以直接将这三个Pod删除之后，会自动重建。
[root@node-1 k8s]# kubectl get pods -n kube-system|grep proxy
kube-proxy-8kgdr 1/1 Running 0 79m
kube-proxy-dq8zz 1/1 Running 0 24m
kube-proxy-gdtqx 1/1 Running 0 155m批量删除 kube-proxy
kubectl get pod -n kube-system | grep kube-proxy | awk '{system("kubectl delete pod "$1" -n kube-system")}'由于你已经通过ConfigMap修改了kube-proxy的配置，所以后期增加的Node节点，会直接使用ipvs模式。
查看日志
[root@node-1 k8s]# kubectl get pods -n kube-system|grep proxy
kube-proxy-84mgz 1/1 Running 0 16s
kube-proxy-r8sxj 1/1 Running 0 15s
kube-proxy-wjdmp 1/1 Running 0 12s
[root@node-1 k8s]# kubectl logs kube-proxy-84mgz -n kube-system
I0827 04:59:16.916862 1 server_others.go:170] Using ipvs Proxier.
W0827 04:59:16.917140 1 proxier.go:401] IPVS scheduler not specified, use rr by default
I0827 04:59:16.917748 1 server.go:534] Version: v1.15.3
I0827 04:59:16.927407 1 conntrack.go:52] Setting nf_conntrack_max to 131072
I0827 04:59:16.929217 1 config.go:187] Starting service config controller
I0827 04:59:16.929236 1 controller_utils.go:1029] Waiting for caches to sync for service config controller
I0827 04:59:16.929561 1 config.go:96] Starting endpoints config controller
I0827 04:59:16.929577 1 controller_utils.go:1029] Waiting for caches to sync for endpoints config controller
I0827 04:59:17.029899 1 controller_utils.go:1036] Caches are synced for endpoints config controller
I0827 04:59:17.029954 1 controller_utils.go:1036] Caches are synced for service config controller日志中打印出了Using ipvs Proxier，说明ipvs模式已经开启。
使用ipvsadm测试，可以查看之前创建的Service已经使用LVS创建了集群。
[root@node-1 ~]# ipvsadm -Ln
IP Virtual Server version 1.2.1 (size=4096)
Prot LocalAddress:Port Scheduler Flags
-> RemoteAddress:Port Forward Weight ActiveConn InActConn
TCP 10.96.0.1:443 rr
-> 1.1.1.101:6443 Masq 1 0 0
TCP 10.96.0.10:53 rr
-> 10.244.0.2:53 Masq 1 0 0
-> 10.244.2.8:53 Masq 1 0 0
TCP 10.96.0.10:9153 rr
-> 10.244.0.2:9153 Masq 1 0 0
-> 10.244.2.8:9153 Masq 1 0 0
UDP 10.96.0.10:53 rr
-> 10.244.0.2:53 Masq 1 0 0
-> 10.244.2.8:53 Masq 1 0 0附：通过配置文件启动主节点
在 master 节点配置 kubeadm 初始化文件，可以通过如下命令导出默认的初始化配置：
[root@node-1 ~]# kubeadm config print init-defaults > kubeadm.yaml然后根据我们自己的需求修改配置，比如修改 imageRepository 的值，kube-proxy 的模式为 ipvs，另外需要注意的是我们这里是准备安装 flannel 网络插件的，需要将 networking.podSubnet 设置为 10.244.0.0/16：
apiVersion: kubeadm.k8s.io/v1beta2
bootstrapTokens:
- groups:
- system:bootstrappers:kubeadm:default-node-token
token: abcdef.0123456789abcdef
ttl: 24h0m0s
usages:
- signing
- authentication
kind: InitConfiguration
localAPIEndpoint:
advertiseAddress: 1.1.1.101
bindPort: 6443
#controlPlaneEndpoint: 1.1.1.100 #如果前面配置了负载均衡，此处填写vip地址
nodeRegistration:
criSocket: /var/run/dockershim.sock
name: node-1
taints:
- effect: NoSchedule
key: node-role.kubernetes.io/master
---
apiServer:
timeoutForControlPlane: 4m0s
apiVersion: kubeadm.k8s.io/v1beta2
certificatesDir: /etc/kubernetes/pki
clusterName: kubernetes
controllerManager: {}
dns:
type: CoreDNS #dns 类型
etcd:
local:
dataDir: /var/lib/etcd
imageRepository: gcr.azk8s.cn/google_containers
kind: ClusterConfiguration
kubernetesVersion: v1.15.3
networking:
dnsDomain: cluster.local
podSubnet: 10.244.0.0/16
serviceSubnet: 10.96.0.0/12
scheduler: {}
---
apiVersion: kubeproxy.config.k8s.io/v1alpha1
kind: KubeProxyConfiguration
mode: ipvs # kube-proxy 模式执行
kubeadm init --config kubeadm.yaml如果忘记了执行后的 join 命令，可以使用命令 kubeadm token create--print-join-command重新获取。
本文章为转载内容，我们尊重原作者对文章享有的著作权。如有内容错误或侵权问题，欢迎原作者联系我们进行内容更正或删除文章。
