为了定位段错误问题,需要移植strace到嵌入式平台上。从git hub上拉取代码下来编译运行,实测可用
编译步骤包括如下几个步骤
1. 下载源代码
2. 编译
//下载源代码
1. mkdir strace && cd strace
2. git init
3. git clone https://github.com/strace/strace.git
3. cd strace && ./bootstrap
如果出现如下错误:
m4/ax_valgrind_check.m4:106: warning: macro `AM_EXTRA_RECURSIVE_TARGETS' not found in library
m4/ax_valgrind_check.m4:145: warning: macro `AM_EXTRA_RECURSIVE_TARGETS' not found in library
configure:16784: error: possibly undefined macro: AM_EXTRA_RECURSIVE_TARGETS
If this token and others are legitimate, please use m4_pattern_allow.
See the Autoconf documentation.
autoreconf: /usr/bin/autoconf failed with exit status: 1
解决方法是升级autoconf:
wget http://ftp.gnu.org/gnu/automake/automake-1.15.tar.gz
tar xf automake*
cd automake-1.15
sh configure --prefix /usr/local
make install
4. 创建Makefile(如果是MIPS,工具链替换成mips对应的就好了)
STRIP=arm-linux-gnueabihf-strip CC=arm-linux-gnueabihf-gcc LD=arm-linux-gnueabihf-ld RANLIB=arm-linux-gnueabihf-ranlib ./configure --host=arm-linux --target=arm-linux --enable-mpers=no
5. 编译
make