摘要：对于【网络工程师】软考考试而言，试题无疑是最重要的学习资料之一。在软考备考过程中，吃透试题、掌握试题所考知识点、熟悉试题的出题思路，对我们提升分数的效果是最明显的，通过对试题的反复练习，还可以查漏补缺。今天，给大家带来【2020年11月网络工程师下午题】部分试题的详解，一起来看看吧~
1、补充命令片段的配置。1.Router 的配置文件[Huawei] sysname Router[Router] vlan batch(1)[Router] interface gigabitethernet 1/0/0[Router GigabitEthernet 1/0/0] port link-type trunk[Router GigabitEthernet 1/0/0] port trunk allow-pass vlan 101[Router GigabitEthernet 1/0/0] quit[Router] interface vlanif 101[Router-Vlanifl01]ip address (2)[Router-Vlanifl01]quit2.AC的配置文件#配置AC和其他网络设备互通[HUAWEI]sysname (3)[AC] vlan batch 100 101[AC] interface gigabitethernet 0/0/1[AC-GigabitEthernet0/0/1] port link -type trunk[AC-GigabitEthernet0/0/1] port trunk pvid vlan 100[AC-GigabitEthernet0/0/1] port trunk allow-pass vlan 100[AC-GigabitEthernet0/0/1] port-isolate(4) //实现端口隔离[AC-GigabitEthernet0/0/1] quit[AC] interface gigabitethernet 0/0/2[AC-GigabitEthernet0/0/2] port link-type trunk[AC-GigabitEthernet0/0/2] port trunk allow-pass vlan 101[AC-GigabitEthernet0/0/2] quit#配置中心AP和AP上线[AC] wlan[AC-wlan-view] ap-group name ap-groupl[AC-wlan-ap-group-ap-group1] quit[AC-wlan-view] regulatory-domain-profile name default[AC-wlan-regulate-domain-default] country-code (5)[AC-wlan-regulate domain-default] quit[AC-wlan-view]ap-group name ap-group1[AC-wlan-ap-group-ap-group1] regulatory-domain-profile(6)Warning: Modifying the country code will clear channel, power and antenna gain configOf the config send reset the AP Continue?[Y/N]:y[AC-wlan-ap-group-ap-group1]quit[AC-wlan-view]quit[AC]capwap source interface(7)[AC] wlan[AC-wlan-view] ap auth mode mac-auth[AC-wlan-view] ap-id 0 ap-mac 68a8-2845-62fd//中心AP的MAC地址[AC-wlan-ap-0] ap-name central APWarning: This operation may cause AP reset Continue?[Y/N]:y[AC-wlan-ap-0] ap-group ap-group1Warning: This operation may cause AP reset.If the country code changes,it will clear channel,power and antenna gain configuration s of the radio,Whether to continue?[Y/N]:y[AC- wlan-ap-0] quit其他相同配置略去#配置WLAN业务参数[AC-wlan-view] security-profile name wlan-net[AC-wlan-sec-prof-wlan-net] security wpa-wpa2 psk pass-phrase(8) aes[AC-wlan-sec-prof-wlan-net] quit[AC-wlan-view] ssid-profile name wlan-net[AC-wlan-ssid-prof-wlan-net] ssid(9)[AC-wlan-ssid-prof-wlan-net] quit[AC-wlan-view] vap-profile name wlan-net[AC-wlan-vap-prof-wlan-net] forward-mode tunnel[AC-wlan-vap-prof-wlan-net] service-vlan vlan-id(10)[AC-wlan-vap-prof-wlan-net] security-profile wlan-net[AC-wlan-vap-prof-wlan-net] ssid-profile wlan-net[AC-wlan-vap-prof-wlan-net] quit[AC-wlan-view] ap-group name ap-group1[AC-wlan-ap-group-ap-groupl] vap-profile wlan-net wlan 1 radio 0[AC-wlan-ap-group-ap-group1] vap-profile wlan-net wlan 1 radio 1[AC-wlan-ap-group-ap-group1] quit
答案:
答题解析:
1、补充命令片段的配置。1.Router 的配置文件[Huawei] sysname Router[Router] vlan batch(1)[Router] interface gigabitethernet 1/0/0[Router GigabitEthernet 1/0/0] port link-type trunk[Router GigabitEthernet 1/0/0] port trunk allow-pass vlan 101[Router GigabitEthernet 1/0/0] quit[Router] interface vlanif 101[Router-Vlanifl01]ip address (2)[Router-Vlanifl01]quit2.AC的配置文件#配置AC和其他网络设备互通[HUAWEI]sysname (3)[AC] vlan batch 100 101[AC] interface gigabitethernet 0/0/1[AC-GigabitEthernet0/0/1] port link -type trunk[AC-GigabitEthernet0/0/1] port trunk pvid vlan 100[AC-GigabitEthernet0/0/1] port trunk allow-pass vlan 100[AC-GigabitEthernet0/0/1] port-isolate(4) //实现端口隔离[AC-GigabitEthernet0/0/1] quit[AC] interface gigabitethernet 0/0/2[AC-GigabitEthernet0/0/2] port link-type trunk[AC-GigabitEthernet0/0/2] port trunk allow-pass vlan 101[AC-GigabitEthernet0/0/2] quit#配置中心AP和AP上线[AC] wlan[AC-wlan-view] ap-group name ap-groupl[AC-wlan-ap-group-ap-group1] quit[AC-wlan-view] regulatory-domain-profile name default[AC-wlan-regulate-domain-default] country-code (5)[AC-wlan-regulate domain-default] quit[AC-wlan-view]ap-group name ap-group1[AC-wlan-ap-group-ap-group1] regulatory-domain-profile(6)Warning: Modifying the country code will clear channel, power and antenna gain configOf the config send reset the AP Continue?[Y/N]:y[AC-wlan-ap-group-ap-group1]quit[AC-wlan-view]quit[AC]capwap source interface(7)[AC] wlan[AC-wlan-view] ap auth mode mac-auth[AC-wlan-view] ap-id 0 ap-mac 68a8-2845-62fd//中心AP的MAC地址[AC-wlan-ap-0] ap-name central APWarning: This operation may cause AP reset Continue?[Y/N]:y[AC-wlan-ap-0] ap-group ap-group1Warning: This operation may cause AP reset.If the country code changes,it will clear channel,power and antenna gain configuration s of the radio,Whether to continue?[Y/N]:y[AC- wlan-ap-0] quit其他相同配置略去#配置WLAN业务参数[AC-wlan-view] security-profile name wlan-net[AC-wlan-sec-prof-wlan-net] security wpa-wpa2 psk pass-phrase(8) aes[AC-wlan-sec-prof-wlan-net] quit[AC-wlan-view] ssid-profile name wlan-net[AC-wlan-ssid-prof-wlan-net] ssid(9)[AC-wlan-ssid-prof-wlan-net] quit[AC-wlan-view] vap-profile name wlan-net[AC-wlan-vap-prof-wlan-net] forward-mode tunnel[AC-wlan-vap-prof-wlan-net] service-vlan vlan-id(10)[AC-wlan-vap-prof-wlan-net] security-profile wlan-net[AC-wlan-vap-prof-wlan-net] ssid-profile wlan-net[AC-wlan-vap-prof-wlan-net] quit[AC-wlan-view] ap-group name ap-group1[AC-wlan-ap-group-ap-groupl] vap-profile wlan-net wlan 1 radio 0[AC-wlan-ap-group-ap-group1] vap-profile wlan-net wlan 1 radio 1[AC-wlan-ap-group-ap-group1] quit
答案:
问题一
（1）100,101
（2）10.23.101.2,24或者10.23.101.2,255.255.255.0
（3）AC
（4）enable
（5）cn
（6）default
（7）vlanif,100
（8）a1234567
（9）wlan-net
（10）101
答题解析:
略
查看完整试题>>>
