记录一下搭建lvs环境的步骤
当中master 10.0.0.11，backup 10.0.0.15。realserver1 10.0.0.119。realserver210.0.0.11
1.mkdir /usr/local/src/lvs
2.cd /usr/local/src/lvs
3.上传keepalived-1.1.20.tar.gz ipvsadm-1.24.tar.gz到指定目录
4.lsmod |grep ip_vs
5.uname -r
结果：2.6.32-431.el6.x86_64
6.ln -s /usr/src/kernels/2.6.32-431.el6.x86_64/ /usr/src/linux
7 tar zxvf ipvsadm-1.24.tar.gz
cd ipvsadm-1.24
make && make install
然后用 ipvsadm 进行測试
8. tar zxvf keepalived-1.1.20.tar.gz
cd keepalived-1.1.20
./configure && make && make install
find / -name keepalived # 查看keepalived位置
9. cp /usr/local/etc/rc.d/init.d/keepalived /etc/rc.d/init.d/
cp /usr/local/etc/sysconfig/keepalived /etc/sysconfig/
mkdir /etc/keepalived
cp /usr/local/etc/keepalived/keepalived.conf /etc/keepalived/
cp /usr/local/sbin/keepalived /usr/sbin/
service keepalived start|stop #做成系统启动服务方便管理.
10
vim /etc/init.d/lvsdr
#!/bin/bash
RIP1=10.0.0.19
RIP2=10.0.0.23
VIP=10.0.0.11
. /etc/rc.d/init.d/functions
case "$1" in
start)
echo " start LVS of DirectorServer"
# set the Virtual IP Address and sysctl parameter
/sbin/ifconfig eth0:0 $VIP broadcast $VIP netmask 255.255.255.255 up
/sbin/route add -host $VIP dev eth0:0
echo "1" >/proc/sys/net/ipv4/ip_forward
#Clear IPVS table
/sbin/ipvsadm -C
#set LVS
#Web Apache
/sbin/ipvsadm -A -t $VIP:80 -s rr
/sbin/ipvsadm -a -t $VIP:80 -r $RIP1:80 -g
/sbin/ipvsadm -a -t $VIP:80 -r $RIP2:80 -g
#Run LVS
/sbin/ipvsadm
;;
stop)
echo "close LVS Directorserver"
echo "0" >/proc/sys/net/ipv4/ip_forward
/sbin/ipvsadm -C
/sbin/ifconfig eth0:0 down
;;
*)
echo "Usage: $0 {start|stop}"
exit 1
esac
11. chmod a+x /etc/init.d/lvsdr
service lvsdr start|stop
12.查看结果
ipvsadm -ln
13配置Realserver脚本
vim /etc/init.d/realserver
#!/bin/bash
VIP=10.0.0.11
. /etc/rc.d/init.d/functions
case "$1" in
start)
echo " start LVS of REALServer"
/sbin/ifconfig lo:0 $VIP broadcast $VIP netmask 255.255.255.255 up
echo "1" >/proc/sys/net/ipv4/conf/lo/arp_ignore
echo "2" >/proc/sys/net/ipv4/conf/lo/arp_announce
echo "1" >/proc/sys/net/ipv4/conf/all/arp_ignore
echo "2" >/proc/sys/net/ipv4/conf/all/arp_announce
;;
stop)
/sbin/ifconfig lo:0 down
echo "close LVS Directorserver"
echo "0" >/proc/sys/net/ipv4/conf/lo/arp_ignore
echo "0" >/proc/sys/net/ipv4/conf/lo/arp_announce
echo "0" >/proc/sys/net/ipv4/conf/all/arp_ignore
echo "0" >/proc/sys/net/ipv4/conf/all/arp_announce
;;
*)
echo "Usage: $0 {start|stop}"
exit 1
esac
chmod a+x /etc/init.d/realserver
service realserver start|stop
能够通过ifconfig或者ip add 命令查看是否绑定
备注:此脚本在两台realserver上均须运行。
