CentOS Linux解决Device eth0 does not seem to be present 一,问题描述 在VMware里克隆出来的CentOS Linux。。 ifconfig...没有看到eth0.。然后重启网卡又报下面错误。 故障现象: service network restart Shutting down loopback insterface: [ OK ] Bringing up loopback insterface: [ OK ] Bringing up interface eth0: Device eth0 does not seem to be present,delaying initialization. [FAILED] 二,解决办法 1; 首先,打开/etc/udev/rules.d/70-persistent-net.rules内容如下面例子所示: # vi /etc/udev/rules.d/70-persistent-net.rules # This file was automatically generated by the /lib/udev/write_net_rules # program, run by the persistent-net-generator.rules rules file. # # You can modify it, as long as you keep each rule on a single # line, and change only the value of the NAME= key. # PCI device 0x1022:0x2000 (pcnet32) SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:0c:29:8f:89:9 7", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0" # PCI device 0x1022:0x2000 (pcnet32) SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:0c:29:50:bd:1 7", ATTR{type}=="1", KERNEL=="eth*", NAME="eth1" 记录下,eth1网卡的mac地址00:0c:29:50:bd:17 接下来,打开/etc/sysconfig/network-scripts/ifcfg-eth0 # vi /etc/sysconfig/network-scripts/ifcfg-eth0 将 DEVICE="eth0" 改成 DEVICE="eth1" , 将 HWADDR="00:0c:29:8f:89:97" 改成上面的mac地址 HWADDR="00:0c:29:50:bd:17" 最后,重启网络 # service network restart 或者 # /etc/init.d/network restart 正常了。 2 1 、删除/etc/udev/rules.d/70-persistent-net.rules文件,重启系统。 3 、如果上面的不起作用 (1), ifconfig 查看HWADDR的值 (2), /etc/sysconfig/network-script/ifcfg-eth1中修改ifconfig中查出的HWADDR值;
CentOS Linux解决Device eth0 does not seem to be present
转载本文章为转载内容,我们尊重原作者对文章享有的著作权。如有内容错误或侵权问题,欢迎原作者联系我们进行内容更正或删除文章。
上一篇:cognos启动报错
下一篇:iostat 使用说明
提问和评论都可以,用心的回复会被更多人看到
评论
发布评论
相关文章
-
device eth0 does not seem to present
解决方法vi /etc/udev/rules.d/70-persistent-net.rules显示如下# This file was automatically generat
DEVICE eth0 present HWADDR linux