在顶端窗口找到
有的在build run路径 有的在qt version路径
在顶端窗口找到
有的在build run路径 有的在qt version路径
经常会遇到这样的情况,原来安装过QT环境(C:\Qt\4.4.3),将整个目录移动至D盘,配置QTD
学习Linux环境下的嵌入式开发时,需要安装两个版本的qt,即QT_x11和QT/Embedded。因此在使用qmake命令时总需要使用绝对路径来对两个版
qmake在手工连编Qt之前,下面这些环境变量必须被设
解决这个问题,第一,要找到你要用的编译器,比如在电脑
qmake教程介绍这个教程
用来组建项目,解析.pro文件,生成Makefile
举报文章
请选择举报类型
补充说明
0/200
上传截图
格式支持JPEG/PNG/JPG,图片不超过1.9M